Follow us on:

Filter By

For Use By

For Use By

Brand

Brand

Colour Family

Colour Family

Interior / Exterior Use

Interior / Exterior Use

Single, Two or Three Pack

Single, Two or Three Pack

Base Type

Base Type

Finish

Finish

Application Method

Application Method

Need Help?

Binders

Specialist high strength binders deliver durable protection for surfaces exposed to mechanical stress, preventing wear and damage. These fast-curing products ensure excellent adhesion across substrates, reducing the need for expensive screed replacements in defective concrete flooring and sand and cement screeds. They are ideal for high-demand environments such as food processing areas, chemical plants, workshops, and warehouses. Rawlins’ technical support team are available to help you find the right solution and offer product compatibility advice.

Active filters

Vuba Easihold Decorative Stone Resin Binder | Flower Beds, Borders/Edging, Pathways, & Patio Areas

Vuba Easihold Decorative Stone Binder

Pour on, spray on, or stone mix gravel binder that is suitable for flower beds, borders/edging, pathways, and patio areas. Water-based formula Air-drying Recommended to use with 4-8mm diamater stones and plant-topper stones

Price £34.50 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Remmers Epoxy FAS 100

Remmers Epoxy FAS 100

Substrate tolerant, unpigmented epoxy resin binder that is used as an impregnation agent, primer, levelling layer and for the production of compression resistant mortars, flow mortars, blinding layers for blinded covers. Excellent adhesion on many substrates Can be subjected to mechanical loads Suitable for use as primer without...

Price £241.50 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Sikafloor 151 | Epoxy primer levelling mortar and mortar screed

Sikafloor 151

2 part, low viscosity, multipurpose, epoxy resin which can be used as an epoxy primer, levelling mortar and mortar screed. For priming concrete substrates, cement screeds and epoxy mortars. May only be used by experienced professionals. Low viscosity. Good penetration. Good bond strength. Easy application. Short waiting times....

Price £904.91 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Sikafloor 169

Sikafloor 169

2-part, very low yellowing, low viscous, transparent epoxy resin binder for mortars, screeds and seal coats like Sika CompactFloor and Sika Decofloor. Transparent Low VOC-content Low yellowing Good mechanical and abrasion resistance Low viscous Easy application Multi-purpose binder Note: made to order, with an approx. 10-14 day lead...

Price £560.83 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Remmers Epoxy ST 100 | Epoxy Resin Binder | Rawlins Paints

Remmers Epoxy ST 100

Unpigmented epoxy resin binder that is used as an impregnation agent, primer, bonding layer, levelling layer and for the production of compression resistant mortars, flow covers and as a blinding layer for blinded covers.  Can be subjected to mechanical loads Can be subjected to chemical loads Good penetration characteristics Contains no...

Price £67.62 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Tikkurila Temafloor 400 | Epoxy Floor Paint

Tikkurila Temafloor 400

2-component solvent-free epoxy varnish. An excellent product for dust binding and priming of new and old concrete floors, especially where solventless and odourless products are needed. The lacquer can be used for patching when filled with sand. Used as a binder for Temafloor 4000 troweling screed and epoxy concrete. Used also as a topcoat...

Price £397.98 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Remmers QP 100 Resin Binder

Remmers QP 100 Resin Binder

Very fast reacting, transparent binder. Used as a base coat for blind coatings, transparent fixing layer for flake coatings and a transparent top sealant. High UV resistance. Full curing at temperatures from 0°C. Can be subjected to mechanical and chemical loads. Please Note: This product is subject to a lead time of 14-21 Working...

Price £405.72 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Sikafloor 32 Pronto

Sikafloor 32 Pronto

2-part PU modified PMMA elastomeric binder for self-smoothing screed, broadcasted systems and levelling mortars based on reactive acrylic resins for flooring and car park deck application. Sikafloor 32 Pronto consists of: Part A: Sikafloor 32 Pronto Resin Part B: Sikafloor Pronto Hardener Please Note: 200KG Size is only available on a...

Price £778.27 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Remmers Epoxy Primer PF ( Epoxy Primer PF New)

Remmers Epoxy Primer PF

Pigmented primer in 3 colours as well as base layer for blinded covers. Used as primer in the system Remmers Deck OS 8. Can be subjected to mechanical loads Excellent adhesion on concrete and cement screed Contains no plasticisers, nonylphenols or alkylphenols Physiologically harmless once fully cured Suitable for use as primer without...

Price £241.50 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
RSL Resubind CP | Anti-Slip Binder For Car Parks

RSL ResuDeck RBS

A 3 component, non-pigmented, solvent-free polyurethane binder designed for car park decks, walkways and driveways, surface dressed with aggregates to create non-slip, hard wearing, textured floor finishes. Can be used in interior or exterior car park decks on a variety of substrates. Different aggregates can be used to create various...

Price £176.90 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Tikkurila Fontefloor EP Primer | Odourless Priming Lacquer For Concrete

Tikkurila Fontefloor EP Primer

2-component water-borne epoxy lacquer that seals the concrete surface and provides adhesion to all Temafloor coatings and screeds, and Fontefloor paints, and can also be used for patching cracks and holes in concrete. Dries in 6 hours for overcoating Also used for priming of damp concrete with relative humidity over 97% prior to Fontefloor...

Price £455.76 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Tikkurila Temafloor 200 Primer | Epoxy Floor Paint

Tikkurila Temafloor 200 Primer

2-component solvent-free epoxy varnish. It gives good adhesion for Temafloor coatings and screeds and dries fast. Short overcoating time enables whole system application in one day. Thinned Temafloor 200 Primer penetrates well into the pores of the concrete sealing the surface and giving good adhesion for coatings and screeds Mixed with...

Price £528.49 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Tikkurila Temafloor 210 Clear | Epoxy Floor Paint

Tikkurila Temafloor 210 Clear

Solvent-free varnish used for dust binding, priming and topcoating especially where solventless and odourless products are needed. The lacquer can be used for patching when filled with sand. Good resistance against abrasion, oils and grease. Also for dust binding and priming of new and old concrete floors prior to laying Temafloor epoxy...

Price £322.60 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Tikkurila Temafloor 220W Primer | Epoxy Floor Paint

Tikkurila Temafloor 220W Primer

2 component solvent-free varnish used for priming of new and old concrete floors, especially where solventless and odourless products are needed. For priming of new and old concrete floors prior to laying Temafloor coatings and screeds. Good resistance against oil and grease. Suitable for priming of damp concrete (relative humidity of the...

Price £383.40 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Tikkurila Temafloor 25 Clear | Floor Paint

Tikkurila Temafloor 25 Clear

1-component moisture curing polyurethane primer and topcoat with excellent resistance to abrasion. Easy to apply due to one component formulation. Dust binding and prevents impurities from being absorbed into the surface. For topcoating of mosaic floors. Excellent resistance to abrasion. For varnishing of concrete, asbestos cement and...

Price £400.18 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Tikkurila Temafloor 401 | Concrete Floor Repair

Tikkurila Temafloor 401

2-component solvent-free epoxy varnish and is mostly used as a low viscosity binder in Temafloor 4000 grinding screed. Also the varnish can be used as a binder for Temafloor 4000 ESD trowelling screed. A low viscosity varnish used as binder in Temafloor 4000 troweling screed .

Price £424.48 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Mapei Mapefloor I 910 | Epoxy Binder for Making Resin Mortar Screeds

Mapei Mapefloor I 910

Two-component low-yellowing epoxy binder for making resin mortar screeds. Some application examples: Binder for epoxy mortar used to repair and/or form protective coatings on industrial floors Adhesion promoter for floors made from synthetic mortar For professional use only More Information Delivery Info

Price £135.77 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery
Mapei Mapefloor Binder 930 | Decorative Flooring Aliphatic Polyurethane Binder

Mapei Mapefloor Binder 930

A one-component, moisture-curing, non-yellowing, transparent aliphatic polyurethane binder. When mixed with natural aggregates, such as marble, natural stone or quartz, it may be used to make pervious floorings for internal and external surroundings. May be used to create unique flooring with an unlimited variety of patterns and aesthetic...

Price £190.72 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery

Filter By

For Use By

For Use By

Brand

Brand

Colour Family

Colour Family

Interior / Exterior Use

Interior / Exterior Use

Single, Two or Three Pack

Single, Two or Three Pack

Base Type

Base Type

Finish

Finish

Application Method

Application Method

Need Help?

Need Help?



High Strength Binders: Engineered for Durability

High strength binders are formulated to provide tough, long-lasting protection for a variety of substrates exposed to heavy use. Designed to withstand mechanical loads, these binders help prevent wear, cracking, and damage in high-traffic areas. They are a practical solution for maintaining the structural integrity of flooring and other surfaces in demanding industrial and commercial settings.



The Need for High Strength Binders

In environments where substrates face constant stress from heavy equipment, chemicals, and daily use, high strength binders provide essential protection. By forming a secure bond with the substrate, these products enhance surface durability and reduce the frequency of repairs. The rapid curing properties of these binders also allow for a quick return to service, making them ideal for time-sensitive operations. Furthermore, they offer a cost-effective way to reinforce defective concrete and screeds, preventing the need for complete floor replacements.



Where Are High Strength Binders Essential?

These versatile binders are suited to a wide range of industries where robust surface protection is critical. They are commonly used in the following settings:

Food Processing and Beverage Areas

Floors in these environments are regularly exposed to moisture, food particles, and cleaning chemicals. High strength binders create a hygienic, durable surface that resists stains and chemical damage, ensuring compliance with industry regulations.

Chemical Plants

In areas where corrosive chemicals and spills are a constant risk, these binders provide a resistant barrier that helps to preserve the integrity of flooring.

Engineering Workshops

Heavy machinery, tools, and equipment can cause significant wear to unprotected floors. High strength binders reinforce surfaces, offering resistance to impacts, oil spills, and machinery movement.

Automotive and Aviation Facilities

From vehicle workshops to hangars, these settings demand strong floor protection due to exposure to oils, fuels, and heavy loads. High strength binders provide the necessary durability and chemical resistance.

Factory Units and Warehouses

Warehouses and factory units often experience high traffic from forklifts, pallet trucks, and heavy goods. Binders in these environments must resist abrasion, impacts, and loading pressures, making high strength binders a preferred choice for long-term durability.



Unmatched Features for Demanding Environments

High strength binders are distinguished by several key features that make them ideal for use in tough environments:

Unrivalled Durability

These binders offer long-term protection against mechanical stress, including impacts, heavy loads, and frequent traffic.

Fast Curing for Minimal Disruption

Rapid curing formulations reduce downtime, allowing operations to resume quickly without compromising surface protection.

Superior Adhesion

The strong bond formed between the binder and the substrate ensures that the surface remains resistant to peeling, cracking, or damage over time.

Cost-Efficient Solution

By reinforcing defective flooring, particularly concrete and screeds, these binders help to avoid the high costs associated with full floor replacements.

Chemical Resistance

In environments exposed to aggressive chemicals, the binders provide a protective layer that prevents floor degradation.

For tailored advice on selecting the right high strength binder for specific applications, contact the technical support team for expert guidance on product compatibility.