- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Need Help?
Crack Fillers
Buy crack fillers to repair and fill cracks in vertical and horizontal substrates, such as concrete floors, walls and tarmac. Form an effective barrier against water infiltration and from corrosion, preventing further damage and weakening whilst structurally bonding substrates and sections together. Click here for more info.
Active filters
- Brand: Fosroc
Fosroc Nitofill LV
Fosroc Nitofill LV is a low viscosity system for the injection of cracks between 0.3mm and 9 mm wide in concrete and masonry, where both sides of the crack can be sealed to prevent resin drainage.A two pack thixotropic epoxy resin product for the repair of cracked concrete and masonry by the injection process Low viscosity: Permits...
Fosroc Nitofill TH
Fosroc Nitofill TH is developed for the injection of cracks between 0.5mm and 9 mm wide in concrete and masonry, and has been specially formulated to minimise the drainage of resin from cracks which are incompletely sealed.A two pack thixotropic epoxy resin product for the repair of cracked concrete and masonry by the injection process...
Fosroc Nitokit Surface Sealant
Fosroc Nitokit Surface Sealant is a two part filled epoxy is used to seal over the cracks in structural materials such as concrete.Prevents flow-out of resin when injected into cracks, and bonds injection nipples to the surface Also used in evening out substrates and filling blow-holes prior to applying floor and wall epoxy and urethane...
Fosroc Nitokit LV
Fosroc Nitokit LV basic pack incorporates a two-part epoxy crack injection resin contained in a patented single cartridge, complete with injection nipples and hoses. Designed for injecting cracks in concrete and masonry, where there is a need to consolidate a structure or exclude water and air from contact with reinforcement.Low viscosity...
Fosroc Nitokit TH
Fosroc Nitokit TH basic pack incorporates a two-part epoxy crack injection resin contained in a patented single cartridge, complete with injection nipples and hoses. Designed for injecting cracks in concrete and masonry, where there is a need to consolidate a structure or exclude water and air from contact with reinforcement.Thixotropic...
Fosroc Nitofill UR63
Fosroc Nitofill UR63 is a two part liquid polyurethane which reacts to form a tough, slightly flexible resin. It has good adhesion to concrete and masonry and when injected into cracks allows some movement without loss of bond.Flexible foaming two part polyurethane injection resin For injecting into cracks in concrete or masonry in wet...
Fosroc Nitofill WS60
Fosroc Nitofill WS60 is a two part liquid that reacts when mixed with water to form a rigid, polyurethane foam barrier. Because of the low viscosity and the expansion during polymerisation, the resin will penetrate deep into cracks.Stops the flow of water when injected into cracks in concrete in the presence of water Provides an effective...
Need Help?
Need Help?
Our crack fillers are suitable for almost all repairs, restorations and renovations, filling voids and gaps created by damage, movement or attack from water and rust. They help prevent weakening, and on floors in particular fill in recesses that could become trip hazards such as around manhole covers, across paths, forecourts and more.
Fosroc, Mapei, Rust-Oleum and Sika - the biggest and best manufacturers of crack repair products available at Rawlins Paints.
If you require more help to find and specify a crack filler for your project or contract, our technical team are always on hand to advise. Give us a call on 0113 2455450 (option 2) or send a message to [email protected].
Rust-Oleum Epoxyshield Fine Crack Repair
A liquid crack filler for concrete floors for fine cracks up to 3mm wide. Specially designed for repairing small cracks and holes in concrete floors to create a smooth and even finish, leaving a good sound surface.
- Dry in 3-4 hours (at 20°C)
- To recoat after 4 hours (at 20°C)
- Solvent-free epoxy
Sika Concrete Crack Repair
Sika's professional and industrial-scale crack fillers are designed for sealing water bearing and dry cracks and joints, or to create watertight curtains behind a structural envelope. As well as concrete, Sika products are used on projects that include asphalt, tarmac, masonry, mortar, stone, steel and wood. Narrow down your search for suitable substrates using our sidebar filter, and check the relevant data sheet to confirm which subtrates are compatible for a particular product.
Sika crack fillers have been used around the world in projects such as:
- Bridges and other civil engineering buildings
- Industrial and residential buildings
- Columns, beams, foundations, walls, floors and water retaining structures
The full Sika range includes:
- Waterproofing Injection
- Crack Waterproofing
- Construction Joint Injection
- Curtain Injection
- Structural Injection
- Structural Cracks
- Injection of Imperfections and voids