- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempalin Enamel 52140 is a glossy, general purpose, alkyd topcoat forming a weather resistant coating. The product is flexible and resistant to salt water and spillage of mineral oil and other aliphatic hydrocarbons.
- Recommended as finishing coat for alkyd systems on exterior and interior steel and woodwork in mildly to moderately corrosive environment e.g. engine rooms including tank tops, main engines and auxiliary machinery
- Complies with EU Directive 2004/42/EC, subcategory i
- EC-type examined as a low flame spread material when used as part of a predefined paint system
For professional use only
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Hempalin Enamel 52140 is a glossy, general purpose, alkyd topcoat forming a weather resistant coating. The product is flexible and resistant to salt water and spillage of mineral oil and other aliphatic hydrocarbons. Recommended as finishing coat for alkyd systems on exterior and interior steel and woodwork in mildly to moderately corrosive environment e.g. engine rooms including tank tops, main engines and auxiliary machinery.
Quick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- For new build, maintenance and repair
- Flexible, resistant to salt water and spillage of mineral oil and other aliphatic hydrocarbons
- Glossy, general purpose topcoat
- For mildly to moderately corrosive environments
- For exterior and interior usage
- Apply with brush/roller, air spray or airless spray. Nozzle pressure: 150 bar [2200 psi] Nozzle orifice: 0.018"
- Complies with EU Directive 2004/42/EC, subcategory i
- EC-type examined as a low flame spread material when used as part of a predefined paint system
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
Overcoating
Hempel’s specification supersedes any guidelines indicated in the overcoating table. Overcoating times are indicative for products of the same generic chemistry. Two coats of the topcoat may be necessary to obtain full hiding power.
- Atmospheric medium
Hempalin Enamel 52140
-
- 16 hours - 9 days @ 10°C
- 8 hours - 5 days @ 20°C
- 6 hours - 4 days @ 30°C
- 4 hours - 60 hours @ 40°C
Product Details
7003-907581
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Steel
- Application Method
- Brush/roller, air spray, airless spray
- Sheen
- High-gloss
- VOC Levels
- 429 g/L
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 20L
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 2 hours
- Coverage
- 11 m²/L-18 m²/L (15 m²/L recommended)
- Recommended Thinner/Cleaner
- Hempel's Thinner 08230
- Solids by Volume
- 46 ± 2% / 40 ± 2%
- Heat Resistance (up-to)
- Maximum, dry exposure only: 120°C
- Shelf Life (from date of manufacture)
- 5 years
- Touch Dry
- 6 hours @ 10°C, 2 hours @ 20°C, 1 hour @ 30°C, ½ hour @ 40°C
- Recommended Dry Film Thickness
- 25-40 microns (30 recommended)
- Recommended Wet Film Thickness
- 50-90 microns (70 recommended)
- Dry to Recoat
- 16 hours - 9 days @ 10°C, 8 hours - 5 days @ 20°C, 6 hours - 4 days @ 30°C, 4 hours - 60 hours @ 40°C
- Specific Gravity
- 1.1 kg/L / 1 kg/L
- Hard Dry
- 14 hours @ 10°C, 4 hours @ 20°C, 2 hours @ 30°C, 1½ hours @ 40°C
- Flashpoint
- 38°C
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Primed Surfaces
- Finish
- High Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Mineral Oil Resistance
- Usages
- Weather Resistance
- Usages
- Salt Water Resistance
- Usages
- Aliphatic Hydrocarbons Resistance
- Usages
- Mild to Moderately Corrosive Environments
- Usages
- Flexible
- Product Usage Type
- Topcoat
- Product Range
- Hempalin
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- Magnolia
- Colour Family
- White
- Colour Family
- Anthracite Grey
- Colour Family
- Neutral
- Colour Family
- Cream
- Colour Family
- Violet
- Colour Family
- Beige
- Colour Family
- Aluminium
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Product Type
- Alkyd
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 2 hours
- Product Attributes
- Tough / Durable
- Resistance to
- Aliphatic Hydrocarbons
- Resistance to
- Mineral Oil
- Resistance to
- Weather
- Resistance to
- Salt
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempalin Enamel 52140 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
