- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Need Help?
Other Marine Coatings
Buy marine paints at Rawlins Paints for other areas of boats and offshore infrastructure that also require maintenance from time to time. Smooth and anti-slip deck paint, bilge paint, boot-topping, low friction coatings for ice breakers, surface tolerant epoxy for tidal zones, high-build cargo hold coatings and more. This category contains paints that are for specific uses in the marine sector and are better performing than general coatings for the same use. Click to see more info.
Teamac Suregrip Deck Paint
9 colours. Ready-mixed, anti-slip coating. Provides a rough, slip-resistant finish when dry. For wood, metal, concrete, GRP, and other suitably prepared surfaces. Internal or external use. Ideal for areas with foot or light truck traffic.
Teamac Bilge & Locker Paint
In 5 glossy colours. Hard-wearing coating designed for protecting the inside surfaces of a hull below the waterline. For wood, metal, and GRP. Resilient against harsh marine environments. Long-lasting protection. Low VOC content.
International Interzone 954
2 component, low VOC, high solids, modified epoxy barrier coat in 4,800+ colours designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces. A high film build, high solids, abrasion...
Hempel Hempadur 45143
2-component, polyamide adduct cured epoxy paint with good wetting properties and low water permeability. Self-priming. Forms a hard and tough coating. Good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes. High...
Teamac Boot-topping
In 5 glossy colours. Hard-wearing boot-topping paint. For the area of a vessel’s hull between the waterline and load line. Durable, polishable, resistant to marine growth.
Teamac Black Tar Varnish
Available in gloss black. Synthetic tar varnish, ideal for the protection of wood, metal, and other surfaces. For barns, farm buildings, roofs, and marine applications. Certified non-toxic. Easy to apply with no need for thinning.
PPG SigmaCover 350
SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds. Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Surface tolerant primer/coating...
Teamac Hull Blacking
Available in off-gloss black. Bitumen-based coating designed to protect the hulls of narrowboats, cruisers, and inland waterway vessels. For wood, steel, and cast iron surfaces without the need for a primer or undercoat. Can only be over-coated with another bitumen-based product. Excellent protection against water ingress.
Bonda Marine G4 Primer and Sealer
Bonda Marine G4 Primer and Sealer performs a vital function as a primer when bonding fibreglass to wood, metal, and concrete. A tough yet flexible coating, that is hard wearing Bonds fibreglass to wood, metal, and concrete Hard wearing, non-porous flexible coating Professional use only - from the 24th August 2023, adequate training...
Jotun Jota Armour
3 component, abrasion resistant, polyamine cured epoxy anti-skid coating for approved primers or directly on concrete substrates - such as helidecks, walkways, ramps, weigh bridge decks, decks in general where abrasion resistance and non-slip properties are required.
Sherwin-Williams Dura-Plate 301W
Sherwin-Williams Dura-Plate 301W is a low temperature curing, surface and humidity tolerant two-pack modified epoxy. It can be applied without dew point restrictions and over wet steel surfaces. Approved for Network Rail maintenance specifications, it can be used for both immersion and above the waterline service in marine, offshore,...
Bonda FEW Fine Surface Filler
Bonda FEW Fine Surface Filler is a two-component, polyester, very fine particle filler intended for surfacing work on metal, GRP, plywood and other fillers, prior to spraying. The filler is white in colour and the hardener is red to aid mixing. Primarily used for surfacing work on other fillers Normally requires no primer before topcoat...
International Interzone 954 (Rapid Cure)
International Interzone 954 (Rapid Cure) is a faster drying version of Interzone 954 to be used in tidal areas where immersion will be rapid. Designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and...
PPG SigmaShield 880
PPG SigmaShield 880 (also known as Amerlock 880) is a two-component, high-build, polyamine adduct-cured epoxy coating primarily designed for use in offshore splash zone maintenance such as pipelines, jetties, piling, etc. with outstanding sea water resistance that requires just a single coat that continues to cure when immersed in water....
Carboline Carbomastic 18 FC
Carboline Carbomastic 18 FC is a two-component, fast-curing, heavy-duty, high-build anti-corrosive epoxy coating with a broad and versatile list of uses in marine and other corrosive environments. Excellent immersion performance in both fresh and sea water Suitable as a rust preventive coating in ballast tanks and hull applications...
Zinga Zingatarfree
Zingatarfree (formerly PU Tarfree MIO) is ideal for marine environments and immersion, such boat hulls, with excellent water, corrosion and chemical resistance, and can be used as a replacement for normal coal tar products Single-pack polyurethane paint Use as part of a duplex system with Zinga Apply by brush, roller, conventional...
Sherwin-Williams Epidek M377
2-pack epoxy deck coating. Suitable profile and co-efficient of friction to comply with current MoD(N) requirements for flight decks and weather decks. Important! Subject to a minimum order quantity of 100L and an extended lead time of up to 14 working days. If a smaller quantity is required, our technical team recommends Jotun Jota...
Flag Bilge Paint
Flag Bilge Paint is a one coat paint system for all internal hull surfaces, ideal for bilge areas, giving good resistance to oil, fuel, grease, salt water and fresh water. It is a high opacity polyurethane paint for surfaces such as GRP, wood, steel and concrete. For marine use on bilges, lockers, engine compartments Ideal for GRP, wood,...
International Intershield 300
With a proven 21 years` track record on over 8,700 projects, International Intershield 300 is the offshore industry benchmark in anti-corrosive performance. This unique abrasion resistant, pure epoxy coating, with an aluminium content >9%, offers long term asset protection to offshore structures Unparalleled long term corrosion and...
Jotun Marathon 550
Jotun Marathon 550 is a two component polyamine cured epoxy coating for carbon steel, galvanised, stainless steel, aluminium and concrete substrates as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. The toughest universal high build epoxy primer for all areas down to ST2 - Engineered for...
Sherwin-Williams Epidek M339
A 3-pack epoxy high build anti-slip deck coating designed for spray application as a high profile anti-slip deck paint. May also be applied directly to suitable sound deck coatings. Please note: Also available in Black, Yellow and Bright Yellow subject to a minimum order quantity of 200L and an extended lead time of up to 14 days - please...
Teamac Galley Paint
White matt paint designed to reduce condensation on interior surfaces. For yachts, cruisers, narrowboats, galleys, heads, cabins, ceilings, and other interior areas. Can be overpainted.
Hempel Hempadur Quattro 17634
Hempadur Quattro 17634 is an epoxy primer which cures to a hard and tough coating with good resistance to seawater and various oils. Good resistance to abrasion and has excellent anticorrosive and mechanical properties ideal for application in newbuilding, in ballast tanks, cargo oil tanks and cargo holds EC-type examined as a low flame...
Hempel Non-Skid 45340
A 2-component polyamide cured epoxy high build non-skid coating for steel decks and concrete in severely corrosive environments and/or subject to mechanical wear. Forms a hard, tough, abrasion resistant non-skid coating resistant to abrasion, impact, fresh water, seawater, diesel oil, splashes from petrol, jet fuel, lubricating oil and...
Sikaflex 291i
Sikaflex 291i (available as a pack of 12 x 300cc cartridges) is a non-sag 1-part polyurethane sealant specifically developed for the marine market, which cures on exposure to atmospheric moisture and forms a durable elastomer. 1-part formulation Highly elastic Low odour Non-corrosive Can be over painted Bonds well to a wide variety of...
International Interzone 954GF
International Interzone 954GF is a high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake for enhanced durability, abrasion and corrosion protection with excellent cathodic disbondment performance. For the protection of steelwork in areas where high abrasion and corrosion...
Jotun Balloxy HB Light
Jotun Balloxy HB Light is a surface tolerant, high solids, high build epoxy mastic coating for water ballast tanks. It is specially designed for areas where optimum surface preparation is not possible or desired and provides long lasting protection in environments with high corrosivity. Jotun Balloxy HB Light can be used as primer, mid coat or...
Sherwin-Williams Epidek M153
Sherwin-Williams M153 is an aggregate dressed, ultra heavy duty, hard wearing, coal tar free, solvent-less epoxy anti-slip deck coating. It is used for the treatment of deck surfaces subject to the most extreme of operational conditions requiring a high degree of impact and abrasion resistance, where a high level of anti-slip properties need...
International Intershield 851
International Intershield 851, a two pack high solids, coarse texture non skid epoxy coating used as a non-skid flight deck coating and can also be used on any other deck or walkway subject to heavy wear. Externally approved to DEF STAN 80-134 Type 2 (by the UK MOD) Durable corrosion resistant system with excellent operational image and...
International Interzone 1000
International Interzone 1000 is one of the most proven and reliable glass flake epoxies on the market today, with documented in-service performance dating back almost 30 years. International Interzone 1000 provides outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore and inland environments.
Jotun Marathon IQ2
Jotun Marathon IQ2, a two component polyamine cured epoxy coating, providing superior resistance against impacts and abrasion. It has excellent ice friction performance & ice slip properties and can be used as primer, finish coat or as single coat system in atmospheric and immersed environments. The unrivalled combination of smoothness...
PPG SigmaCover 350 LT
SigmaCover 350 LT is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating that cures at temperatures down to -5°C (23°F), available in 2,600+ colours for wide use in Marine and Protective Coatings such as topsides, decks, superstructures and cargo holds. Available in 2,600+ colours, inc. RAL, BS, NCS & the new...
Bonda Bilge Cleaner
Bonda Bilge Cleaner is a water-based cleaning agent which when added to bilge water removes grease, scum and floating oil with normal boat movement. It is biodegradable, highly concentrated and will get rid of unwanted smells. When diluted it may also be used to remove oil and grease from paintwork, fittings and traffic film from cars...
Need Help?
Need Help?
Marine coatings serve as the first line of defence for vessels and structures exposed to some of the harshest environmental conditions on Earth. From the high seas to industrial docks, the marine environment presents unique challenges that can quickly degrade materials and reduce the lifespan of valuable assets. Without the right protective solutions, vessels, platforms, and equipment are left vulnerable to corrosion, biofouling, UV damage, and physical wear and tear.
Marine coatings have evolved into a highly specialised industry, offering tailored products designed for specific applications. These include hull coatings, deck coatings, bilge paints, cargo and ballast tank coatings, and maintenance products. These coatings are essential for enhancing the performance, durability, and safety of marine vessels and structures. Key benefits include corrosion resistance, improved fuel efficiency, anti-fouling properties, and the ability to withstand the extreme conditions of saltwater exposure, temperature fluctuations, and mechanical stress.
The marine industry covers a wide range of sectors, including commercial shipping, naval fleets, offshore oil and gas platforms, fishing vessels, and leisure boats. Each of these sectors demands a high-performance coating system to meet strict regulatory standards and ensure the safety and efficiency of operations.
Market Sectors Using Marine Coatings
Shipping Industry
The commercial shipping industry, responsible for transporting goods across the world’s oceans, is one of the largest consumers of marine coatings. These coatings are critical for ensuring that vessels remain operational despite constant exposure to seawater, marine organisms, and harsh environmental conditions. Anti-fouling hull coatings, deck coatings, and ballast tank coatings are especially important for shipping vessels, helping to reduce fuel consumption and protect against corrosion.
Offshore Oil and Gas
Offshore oil rigs and platforms are constantly exposed to the corrosive effects of seawater and harsh weather. Marine coatings play an essential role in protecting the structural integrity of these platforms, as well as the equipment used for oil and gas extraction. In this sector, coatings must withstand high levels of abrasion, impact, and chemical exposure, all while providing long-term corrosion protection.
Naval and Defence
Naval vessels, from patrol boats to aircraft carriers, require high-performance coatings to ensure their readiness and reliability in critical operations. These vessels are often subject to extreme operational conditions, including saltwater immersion, high-speed manoeuvres, and heavy impacts. Specialist marine coatings are used to protect these vessels from corrosion, biofouling, and mechanical damage, while also enhancing their operational performance.
Fishing Industry
Fishing vessels, constantly exposed to seawater, fish products, and mechanical wear, require durable coatings to prevent corrosion and contamination. Coatings used in the fishing industry must also resist biofouling, as the accumulation of marine organisms can impede a vessel’s performance and increase fuel consumption. Anti-fouling hull coatings, deck coatings, and bilge paints are particularly important for maintaining the efficiency and longevity of fishing boats.
Leisure Marine
Yachts, sailboats, and other leisure vessels require marine coatings that not only protect the vessel but also ensure it remains in top operational condition. In the leisure marine sector, coatings are used to protect the hull, deck, and other surfaces from the corrosive effects of seawater, UV exposure, and mechanical wear. These coatings also enhance the vessel’s performance by reducing drag and preventing biofouling.
Other Marine Coatings at Rawlins Paints
Hull Coatings
The hull of a vessel is constantly exposed to water, salt, and other corrosive elements. Hull coatings, particularly those with anti-fouling properties, are critical for preventing corrosion and biofouling. These coatings work by either creating a slick surface that organisms cannot adhere to or releasing biocides that deter the growth of marine life. Hull coatings significantly improve a vessel's hydrodynamics, reducing drag and improving fuel efficiency, which is especially crucial for commercial shipping vessels and ferries.
Anti-fouling coatings can be either ablative, wearing off over time to expose fresh layers of biocide, or hard, forming a tough surface resistant to fouling. High-performance hull coatings are often applied in multiple layers, combining primers, anti-corrosive coatings, and topcoat finishes to create a comprehensive protective system.
Deck Coatings
Decks, whether on cargo ships, oil tankers, or luxury yachts, require durable coatings that provide slip resistance and protection from heavy foot traffic, chemical spills, and weather exposure. Deck coatings often include textured finishes to enhance grip and prevent accidents in wet conditions. They are formulated to withstand the mechanical stress caused by shifting cargo, equipment movement, and foot traffic, all while maintaining their structural integrity.
Additionally, deck coatings must resist the degradation caused by continuous UV exposure. For this reason, many coatings contain UV inhibitors to prevent the material from becoming brittle or discoloured over time. For vessels with metallic decks, corrosion resistance is also a primary concern, and specialist deck coatings often include anti-corrosive agents to prevent rust formation.
Bilge Paints and Cleaners
The bilge is one of the most critical areas for protection in any vessel, as it is exposed to water, oil, and other contaminants. Bilge coatings and paints are designed to withstand immersion in these liquids, providing excellent resistance to corrosion and chemical attack. They create a tough, impermeable barrier that protects the underlying metal from rust and prevents contaminants from penetrating the vessel’s structure.
In addition to coatings, bilge cleaners are essential maintenance products. These cleaners help remove oil, grease, and grime that accumulate in the bilge, ensuring that the coatings remain effective over time. The combination of proper bilge cleaning and high-performance bilge paints ensures long-term protection in one of the most vulnerable areas of a vessel.
Cargo and Ballast Tank Coatings
Cargo and ballast tanks are constantly exposed to water, chemicals, and varying loads, making them particularly susceptible to corrosion. Specialist coatings for these areas are formulated to withstand the aggressive conditions found in these tanks, offering resistance to both corrosion and chemical attack.
In cargo tanks, where liquids such as crude oil, chemicals, or fuel are stored, the coatings must provide a seamless and impermeable layer to prevent contamination and leaks. In ballast tanks, where seawater is held to stabilise the vessel, coatings must resist the corrosive effects of saltwater while preventing rust from forming inside the tanks. These coatings are often applied in multiple layers to ensure complete protection, including primers, intermediate layers, and topcoats designed for immersion service.
Maintenance and Repair
Beyond the initial application, marine coatings are integral to the ongoing maintenance and repair of vessels. In the marine industry, regular maintenance is essential to ensure vessels remain seaworthy and meet regulatory standards. Specialist coatings for maintenance and repair are designed for ease of application, allowing for touch-ups and re-coating in dry dock or at sea.
Coatings used for maintenance must adhere well to existing coatings and provide fast-drying, long-lasting protection. These products are essential for repairing areas that have been damaged by abrasion, impact, or corrosion, preventing further degradation and extending the service life of vessels and offshore structures.