- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Need Help?
PPG Products
Active filters
- Finish: Gloss
PPG SigmaDur 550
PPG SigmaDur 550, a two-component, aliphatic acrylic polyurethane finish with excellent resistance to atmospheric exposure conditions that cures at temperatures down to -5°C (23°F).Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Can be recoated unlimited times Used on the exterior of the Padma Multipurpose...
PPG SigmaShield 880
PPG SigmaShield 880 (also known as Amerlock 880) is a two-component, high-build, polyamine adduct-cured epoxy coating primarily designed for use in offshore splash zone maintenance such as pipelines, jetties, piling, etc. with outstanding sea water resistance that requires just a single coat that continues to cure when immersed in water....
PPG Sigmarine 48
General purpose gloss paint in 2,600+ colours. Based on an alkyd-modified resin that is particularly suitable as a finish for boot-top, topside, deck and deck equipment. Quick-drying. Water and weather resistant coating. Can be applied over most intact alkyd paints.Order a Colour Sample
PPG SigmaGuard CSF 585
PPG SigmaGuard CSF 585 is a two-component, solvent-free, amine-cured epoxy tank coating for the storage of drinking water (approved by KIWA Holland) up to 60°C (140°F), for use with SIGMACOVER 522 primer. The coating meets NSF/ANSI Standard 61 for potable water when applied and used as described on nsf.org/Tank coating for drinking water...
PPG SigmaDur 550 H
PPG Sigmadur 550 H (formerly known as Sigmadur 568) is a two-component, high solids, high-build aliphatic acrylic polyurethane finish with excellent resistance to atmospheric exposure conditions with good colour and gloss retention, resisting splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals....
PPG PSX 700
Temporarily unavailable until the week commencing April 21st 2025, due to material shortages. PPG PSX 700 is a two-component, engineered siloxane coating that can be applied directly over inorganic zinc. Offers good resistance to splash and spillage of chemicals.Available in 2,500+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours...
PPG Sigma Vikote 56
Modified acrylic finish coat for above-water areas, in 2,600+ gloss colours. Featuring good gloss and colour retention, resistance to water and splash of mild chemicals. This fast-drying coat can be applied at temperatures down to –10°C. Dries in as little as 30 minutes (@ 20°C). Apply by spray, brush or roller.Order a Colour...
PPG SigmaDur ONE
Single-pack urethane polyester finish coat in 2,600+ colours for onboard maintenance on topsides, decks and superstructures.Quick drying. Pre-reacted binder, no free isocyanates added. Easy application with excellent flow and levelling properties. Recommended application is by brush and roller only. Good adhesion on most aged, sound...
PPG SigmaTherm 175
PPG SigmaTherm 175 is a heat-resistant modified alkyd aluminum finish that offers heat resistance up to 175°C (350°F). One component High-brilliancy Spray application improves the appearance Gloss finish Touch dry in 1 hour (at 20°C (68°F)) Ready to overcoat after 16 hours (at 20°C (68°F))
PPG SigmaGuard 720
PPG SigmaGuard 720, a two-component, reinforced high solids tank coating, based upon polyamine adduct cured pure epoxy technology. The coating has recognized corrosion control (Lloyd`s Register) and short curing periods, .Tank coating with good chemical resistance against a wide range of chemicals Short curing periods and easy to clean...
PPG PSX 700 A Clear Coat
PPG PSX 700 A Clear Coat is a two-component, engineered polysiloxane clearcoat compatible with primed steel, clean metals and concrete, offering high durability in challenging environments.Resists dirt pick-up Resists graffiti High solids, low VOC Isocyanate free
PPG SigmaShield 1200
PPG SigmaShield 1200 is a two-component, abrasion-resistant, solvent-free, amine-cured phenolic epoxy coating. This single coat system is designed for under water hull of ice going and ice breaking vessels and is recognised by Lloyd`s register as an abrasion resistant ice coating.Excellent resistance to crude oil up to 120°C (250°F)...
PPG SigmaDur 1800
PPG SigmaDur 1800 is a two-component, high solids polymeric urethane with excellent resistance to atmospheric exposure conditions that cures down to –5°C (23°F), that can be recoated even after long atmospheric exposure.Available in 2,600+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Outstanding colour and gloss retention...
PPG SigmaDur 541
PPG SigmaDur 541, a two-component, non-isocyanate epoxy acrylic finish.Available in 2,300+ colours, inc. RAL, BS, NCS & the new NCS 2050 colours Non-isocyanate Good gloss and color retention Non-yellowing Long pot life but quick-drying Good application properties, also without thinning Applications segments include...
PPG SigmaTherm 230
PPG SigmaTherm 230 is a two-component, high-build, heat-resistant epoxy phenol novolac coating that provides a corrosion resistant barrier on carbon steel and stainless steel under thermal insulation. Suitable as heat resistant system under insulation up to 230°C (450°F) as well as for use in cryogenic conditions.Meets CS-1, 3 and 4 for...
PPG SigmaShield 460
PPG SigmaShield 460 is a two-component, high solids glass flake reinforced polyamine adduct epoxy coating for long-term protection at areas subject to heavy wear and tear, with very low water permeability, (due to glass flake barrier) and resistance to splash and spillage of a wide range of chemicals.Excellent abrasion and impact...
PPG SigmaShield 880GF
PPG SigmaShield 880GF, also known as Amerlock 880GF, a two-component, surface tolerant high solid glass flake epoxy coating designed for use in heavy-duty and corrosive environments for offshore splash zone maintenance.Outstanding sea water resistance - Excellent corrosion resistance Enhanced impact and abrasion resistance - Continues to...
PPG SigmaGuard 603
PPG SigmaGuard 603 is a two-component, solvent-free, amine-cured epoxy coating.One-coat protection for maintenance or major refurbishment of ballast water tanks and crude oil tanks Tolerant to marginal surface preparation Good corrosion resistance Can be applied by heavy-duty, single-feed, airless spray equipment (60:1) Reduced...
PPG NovaGuard 840
PPG NovaGuard 840 is a two-component, solvent-free, amine-cured novolac phenolic epoxy coating suitable for heavy H2S wastewater environments. such enviroments include unleaded fuel tanks, particularly in aviation, with good chemical & solvent resistance, especially to crude oil up to 120°C (250°F).Good visibility due to light color...
PPG SigmaGlide 890
2-component, silicone-based finish for fouling release systems on ships, installations and seawater intakes under all fouling conditions, for new-building or maintenance.Non-toxic. Can be used at temperatures above 5°C (41°F). No induction time. Can be applied by spray. Can be overcoated after 2 hours.For Reference:See our...
PPG SigmaGuard CSF 650
PPG SigmaGuard CSF 650 (also known as Amercoat CSF 650), is a two-component, solvent-free, amine-cured epoxy tank coating for crude oil/ballast and aliphatic petroleum products, with one-coat protection for steel structures, ships and storage tanks with excellent corrosion resistance.Also suitable as a coating system for the storage and...
PPG Nu-Klad SL
PPG Nu-Klad SL is a three-component, solvent-free, self-levelling epoxy floor coating available in 400+ colours and shades from RAL and British Standard.Suitable for industrial areas with heavy traffic Excellent abrasion resistance Excellent resistance againts hot tires Suitable for use with anti-skid Shelf life:Base & Hardener...
PPG SigmaShield 460 LT
Black or red/brown gloss. Cures at temperatures down to -10°C. Suitable for use on ice-going vessels. Excellent abrasion and impact resistance. Long-term protection at areas subject to heavy wear and tear.
PPG NovaGuard 615
Grey, off-white and clear gloss. Tank coating for crude oil and aliphatic petroleum products Good resistance to various chemicals Can be applied by heavy-duty, single-feed, airless spray equipment (60:1) Meets the requirements of EI 1541 2.2 (coating systems for aviation fuel storage tanks and pipes)
PPG NovaGuard 650
Grey and off-white gloss. Rapid cure tank coating for crude oil and aliphatic petroleum products. Good resistance to various chemicals. Can be applied by heavy-duty, single-feed, airless spray equipment (60:1). Meets the requirements of EI 1541 2.2 (coating systems for aviation fuel storage tanks and pipes).
PPG SigmaGuard 730
Cream and off-white gloss epoxy. Tank coating with good chemical resistance against a wide range of chemicals. Meets the requirements of EI 1541 2.2 (coating systems for aviation fuel storage tanks and pipes).
PPG SigmaShield 420 LT
3 gloss colours. Polyamine adduct cured epoxy coating for cargo tanks of bulk- or oil carriers and storage tanks. Buildcoat for underwater and boottop systems. Excellent abrasion and impact resistance. Outstanding (sea)water resistance. Easy to clean.
Need Help?
Need Help?
PPG Protective and Marine Coatings offer a range of high quality coatings for many different environments. Not only does PPG create products that meet the relevant local and international standards, they prepare for the future by undertaking detailed research so they know the problems customers face; now and in the future.
PPG supply industries with protective paint coatings in a variety of market sectors throughout the world, spanning a diverse range of uses, including structural steel and chemical industries.
The market sectors that PPG cover include:
Infrastructure
Airports | Bridges | Recreational | Water/Wastewater facilities | Commercial buildings
Marine
New-build | Dry Dock | Inland Marine | Sea Stock | Offshore | Cargo Hold | Water Ballast Tank | Antifouling/Fouling Release
Mining
Transportation Equipment | Structural Steel | Under Insulation | Process Equipment | Pipes | Pipework | Floors and Walkways
Oil, Gas and Chemical
Structural Steel | Storage facilities | Process Equipment | Pipelines | Passive Fire Protection
Power
Power Generation | Fossil | Nuclear | Hydroelectric | Wind | Power Transmission and Distribution
Rail
Rail Cars | Rail Terminals and Support Infrastructure | Rail Tunnels | Tank Linings | Hopper Car Linings