Quick Links - Click To Jump To Section:

• Features & Benefits
• Preparation
• Application

Features & Benefits

• Very competitive loadings resulting in reduced paint consumption and less coats to apply
• Fast dry, designed for increased in-shop and on-site application efficiency
• It has been approved and 3rd party certified according to EN13381- 8 and BS 476-21. It has ETA with CE mark and ApplusFire approvals
• Ease of application and smooth surface contributes to provide excellent cosmetic finish to steel
• One product for most common steel sections to reduce complexity application and specification.
• Can be applied up to 1600 micron [63 mils] dry film thickness per coat, thus providing the required protection in less coats
• 12 months weather resistant without topcoat provided that coating is sufficiently dried, applied according the Application Instructions and not exposed to condensation, running or pooling water
• Environmental Product Declaration with third-party certification available (Type III EPD, acc. to ISO 14025, EN 15804). Product can contribute to EPD credits for LEED and BREEAM projects
• Complies with EU Directive 2004/42/EC, The Paints Directive on the limitation of volatile organic compounds: subcategory i.
• Third party certified by Applus+ Fire Safety Mark APF-1825. Up to 120 minutes
• CE marked product with European Technical Assessment (ETA) ETA 22/0309 up to 120 min
• Assessed according to BS 476-21, Fire resistance of structural steel Up to 120 minutes, incl. cellular beams

Preparation

• Remove salts, detergents and other contaminants by high pressure fresh water cleaning
• Abrasive blasting to min. Sa 2½ (ISO 8501-1) / SP 10 (SSPC)
• Zinc coated surfaces: use non-metallic blast media (corundum, garnet, etc.)
• Use approved primer
• Remove oil, grease and other contaminants by suitable detergent cleaning
• Remove dust, blast media and loose materials
• The surface must be dry and clean prior to application
• For approved substrates other than Carbon Steel, the substrate may require other surface preparations, consult Hempel's application instructions for detailed information
• Minor areas can be cleaned by power tool to St 3 provided the surface is roughened and not polished
• Consult Hempel's separate Surface Preparation Guidelines for more details
• Minor areas may be hand or power tool cleaned instead of abrasive blasting

Application

Apply with brush, roller, or airless spray (Nozzle pressure: 200 bar [2900 psi] Nozzle orifice: 0.017-0.023") If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. In general, thinning is not recommended. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C [68°F].

The film thickness is dependent on the required fire resistance as well as the massivity factor (Hp/A) of the steel element. The maximum thickness per coat is 1600 micron [64 mils] Dry Film Thickness equivalent to 2133 micron [85 mils] Wet Film Thickness. Please consult the Application Instruction for more detailed information.

To avoid condensation, apply on a clean and dry surface with a temperature that is at least 3°C [5°F] above the dew point. Stir well before use. 

Clean tools with Hempel's Tool Cleaner 99610. Thinning is not recommended.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.