- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Polyvine Multi-Surface Lacquer is an ultra hard, high quality, cross linked acrylic, sandable coating with a gloss/satin finish. This coating dries to a crystal clear film with extremely good sanding properties, allowing a very high quality of finish to be obtained.
- Clear protection allowing the characteristics of the substrate to still be visible
- Specially formulated to bond to a wide range of interior and exterior surfaces: metal, laminate, timber, tile, ceramic, glass and plastics
- Water, stain and heat resistant
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Data sheet
- Manufacturer
- Polyvine
- For Use By
- Consumer Use
- For Use By
- Professional Use
- For Use On
- Metal
Laminate
Timber
Tile
Ceramic
Glass
Plastics - Application Method
- Brush
- Sheen
- Gloss
Satin - Pack Size
- 1L
4L - Dry to Recoat (at 20°C)
- Up to 2 hours
- Coverage
- Approx. 15-20 sq. m per litre
- Drying time
- 1 to 2 Hours @ 20°C. Low temperature/high humidity increases drying time.
- Fully Cured
- Up to 5 days @ 20°C
- Colour(s)
- Clear
- Base Type
- Water-Based
- Suitable For Use On
- Timber
- Suitable For Use On
- Metal
- Suitable For Use On
- Plastic
- Suitable For Use On
- Tiles
- Suitable For Use On
- Glass
- Suitable For Use On
- Ceramics
- Finish
- Satin
- Finish
- Gloss
- Application Method
- Brush
- Brand
- Polyvine
- Colour Family
- Clear
Questions
Question about the product
AdeS on 2024-09-26 13:06:07 | Question:
Hi. Can I apply this product to the exterior of uPVC doors and window frames in need of a facelift? |
Answer from Rawlins’ Technical Team:
Assuming the UPVC is clean, dry, sound and prepared as detailed in the technical datasheet, you could consider this product. We'd recommend applying to a small test area firstly prior to full application. | |
Jill on 2023-10-08 17:00:46 | Question:
Hello, Can I apply with a Bona mop dedicated to floor finishes? Thanks, Jill |
Answer from Rawlins’ Technical Team:
This product isn't suitable for this type of application. Depending on the substrate, a heavy duty floor varnish would be a better product option. You could consider Polyvine Heavy Duty Extreme Varnish as an alterntive dependent on application type. If the substrate requires a UV Protection or Waterproof element, or intended for application to areas such as pub bar tops, this would be suitable, however previously painted surfaces aren't recommended for use. For mop applications, this product will provide good chemical/alcohol resistance and most general household cleaners can be used to clean the mop, however some of these have bleach present, and this can be harmful to varnish based products. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Polyvine Multi-Surface Lacquer - Clear is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT