- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Jotamastic 80 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids product.
- Specially designed for areas where optimum surface preparation is not possible or desired
- Can be used as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments
- Also available in Aluminium for increased barrier effect
Jotun Jotamastic 80 is a two component polyamine cured epoxy mastic coating that is a surface tolerant, high solids product. Specially designed for areas where optimum surface preparation is not possible or desired. Can be used as a primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and aged coating surfaces. It can be applied at sub zero surface temperatures.
Jotun Jotamastic 80 is primarily designed for maintenance and repair. Only aluminium containing versions to be used in immersed environments.
Marine: Outside hulls, exterior and interior areas.
Protective: Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Approvals and certificates
- Food, Compliant with USA, FDA Title 21, Part 175.300 for dry solids
- Grain, Newcastle Ocupational Health
- Part of a complete system that is certified to Network Rail Line Specification NR/L3/CIV/039 System M20, M24 and N9 (Cert. No's. XM92/M20-148, XM92/M20-149, XM92/M24-122, XM92/M24-123, XM92/M24-124, XM92/M24-125, XM92/M24-126, XM92/M24-158, XN90/N9-069)
Additional certificates and approvals may be available on request.
Features & Benefits
- Surface tolerant for maintenance and repair
- Low film thickness version providing relevant protection at reduced cost in less severe environments
- User friendly
Relevant protection
Low film thickness version providing all the benefits of Jotamastic products in less severe environments.
Surface Tolerant
Specially designed for areas where optimum surface preparation is not possible or desired, and therefore ideal for maintenance and repair.
Variants
Jotamastic 80 offers a range of variants for special usage situations where further enhancement of key features is needed.
Aluminium: for extra barrier effect in extreme environments and improved resistance to cathodic disbonding if direct to steel contact.
MIO: Micaceous Iron Oxide for increased barrier effect and abrasion resistance
Solutions
- For use in a wide range of solutions
- Direct to metal
- As mid coat on zinc primers
- Immersed service
Data sheet
- Manufacturer
- Jotun
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Steel
- Application Method
- Brush, Roller, Spray
- Sheen
- Semi-Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 4.6L, 18.3L
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 4 hours
- Coverage
- 4 to 10.7m²/l
- Touch Dry
- 4 hours
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN2735
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Structural Steel
- Suitable For Use On
- Bridges
- Suitable For Use On
- Atmospheric Environments
- Suitable For Use On
- Immersed Environments
- Suitable For Use On
- Offshore Environments
- Suitable For Use On
- Refineries
- Suitable For Use On
- Power Plants
- Suitable For Use On
- Buildings
- Suitable For Use On
- Mining Equipment
- Suitable For Use On
- Primed Surfaces
- Suitable For Use On
- Compatible Existing Coatings
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- High Solids
- Usages
- Surface Tolerant
- Usages
- Atmospheric
- Usages
- 1 Coat
- Usages
- Direct to Metal
- Product Usage Type
- Primer & Topcoat
- Product Range
- Jotamastic
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Red
- Colour Family
- Off-White
- Colour Family
- Black
- Product Type
- Epoxy Mastic
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 4 hours
- Product Attributes
- 1 coat
- Product Attributes
- High Solids
- Product Attributes
- Surface Tolerant
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Jotamastic 80 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Jotun Jotamastic 80 Aluminium
Jotun Jotamastic 80 Aluminium is a two component polyamine cured epoxy mastic coating. It is aluminium pigmented for improved barrier effect. Suitable for properly prepared carbon steel and aged coating surfaces. Aluminium version of Jotun Jotamastic 80 Surface tolerant, high solids product Specially designed for areas where optimum...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...