Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Ordering References
• Availability
• Installation
• Quality Approval
• Other Information

Features & Benefits

• Supplied on continuous reels for dispensing applications, ease of storage and to reduce wastage in cut-offs
• Supplied with a high performance self-adhesive backing for ease of application and installation
• Pyroplex intumescent material is totally unaffected by water, robust, ‘non-flaking’ and difficult to tear

Ordering References

Availability

Installation

For more detailed insturcitons, see application guides under the "Data Sheets" tab further above.

1. Unwind the glazing system from the coil. Remove the release liner from the product. Fit the product to the bead
2. Mitre cut the bead [with glazing system installed] to fit the aperture. Install one complete side of the beading system using M5 x 50mm stainless steel screws at 150mm centres
3. Cut glass to fit aperture with a tolerance of +/-2mm and install
4. Repeat steps for opposite side of the door

Quality Approval

Pyroplex Limited has a Quality Management System that meets the requirements of ISO 9001, and is independently verified by BSI Quality Assurance under Certificate No. FM10371. Copies of this approval are available on request.

Other Information

End user should ensure that the door has been previously tested and certificated to accept a glazed aperture, failure to observe this guidance may invalidate the test evidence or approval for the door set assembly.

For glass types and aperture sizes refer to the CERTIFIRE certificate of approval CF348 - available from the "Data Sheets" tab further above.

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.