- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Jotun Tankguard Storage is a two component novolac epoxy coating is a specially designed tank lining with excellent chemical resistance. It can be used as primer, mid coat and finish coat in atmospheric and immersed environments.
- Chemical resistant
- Resistant against crude oil up to 90°C
- Application of two coats in one day
- Flexible dry film thickness range 125 - 200 μm
Description
Jotun Tankguard Storage is a two component polyamine cured novolac epoxy coating that is a specially designed tank lining with excellent chemical resistance. It can be used as a primer, mid coat or finish coat in atmospheric and immersed environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and concrete substrates.
Jotun Tankguard Storage is specially designed as an internal lining for offshore, onshore and buried tanks and pipes such as chemical storage, waste water, grey water, process water, concrete bund, fire service lines and drilling mud tanks. Can be used in pressure vessels. This coating has very good resistance to high temperature products. Refer to Protective Product Resistance List.
Approvals and certificates
- Approved to UK Defence Standard 80-97 isue 5, annex G for resistance to Avcat F-44 aviation fuel
Additional certificates and approvals may be available on request.
Features & Benefits
- Chemical resistant
- Resistant against crude oil up to 90°C
- Application of two coats in one day
- Flexible dry film thickness range 125 - 200 μm
High solids tank coating with high temperature resistance
Tankguard Storage provides corrosion protection for the internal lining of steel storage tanks. It is resistant to a wide range of chemicals including, but not limited to, crude oil and aromatic and aliphatic solvents and others.
Certificates and approvals
- Approvals for Aviation Fuel and food contact
- Approved for PSPC COT
Holding primer
When there is a need for a temporary protection of the blasted steel Tankguard Storage can be used in a system with Tankguard Holding Primer as the first coat.
BUYER NOTICE: Due to the complexities and risks within tank coatings, Jotun do not support the purchase of their Tankguard range through dealer/distributor channels. Jotun are happy to support with advice and documentation required for these types of coating projects but as they are removed from the end user the ability to control all risks involved with a coating project for a tank is limited. For these reasons, Jotun will only ensure the product quality within the can when Tankguard products are purchased via a distributor such as ourselves.
Product Details
1066-57222
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- For Use On
- Carbon Steel, Galvanized Steel, Stainless Steel, Concrete
- Application Method
- Brush, Roller, Spray
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Product Certifications
- Approved to UK Defence Standard 80-97 isue 5, annex G for resistance to Avcat F-44 aviation fuel, Approved for PSPC COT
- Pack Size
- 18.8L
- Application
- Brush, Spray
- Coverage
- 3.2 to 6.3m² per litre
- Coverage
- 6.3 - 3.2 m²/l
- Recommended Thinner/Cleaner
- Jotun Thinner No. 23
- Density
- 1.6 kg/l
- Solids by Volume
- 63 ± 2 %
- VOC
- 337 g/l
- Touch Dry
- 4 hours
- Recommended Dry Film Thickness
- 100 - 200 μm
- Recommended Wet Film Thickness
- 160 - 320 μm
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN2735
- Pot Life
- 4 hours at 23°C
- Base Type
- Solvent
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Carbon Steel
- Suitable For Use On
- Immersion
- Suitable For Use On
- Stainless Steel
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Primer & Topcoat
- Product Range
- Tankguard
- Colour Family
- Grey
- Colour Family
- Red
- Colour Family
- Pink
- For Tanks or Pipes
- Tank
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Tankguard Storage is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Jotun Thinner No. 23
Jotun Thinner No. 23 is a paint thinner designed to improve the flow of Jotun Tankguard epoxy products. It can also be used as a cleaner of pumps and tools after and before painting. Jotun Thinner No. 23 is specially suitable as a thinner for tankguard epoxy products.
Price
£44.21
(incl. VAT)
In Stock and Available for Delivery
Jotun Tankguard Holding Primer
Jotun Tankguard Holding Primer is a two component polyamine cured phenolic/novolac epoxy coating. Designed as a holding primer or primer in a complete tank coating system. It has excellent chemical resistance Can be used as primer in atmospheric and immersed environments Suitable for properly prepared carbon steel, galvanised steel,...
Price
£237.73
(incl. VAT)
In Stock and Available for Delivery