- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
- Single-pack, quick-drying anti-corrosive etch primer available in black or grey.
- Suitable for ferrous and non-ferrous metals, including bare steel, aluminium, and galvanised surfaces.
- Chromate-free, phenolic-free, and compatible with powder coatings.
- Overcoatable with most primer systems and suitable for conventional spray or brush application.
- ISO 9001:2015 certified product with compliance to 2004/42 IIB (C) 780 regulations.
- For professional and industrial use only; not for consumer applications.
Important!
- White colour is now obsolete.
Description
HMG CB1004 1K Etch Primer
The single-pack etch primer is designed to provide exceptional adhesion and anti-corrosive protection for metal substrates. Available in black, grey, and white, it is ideal for professional use where long-lasting results are required. Its chromate-free and phenolic-free formulation ensures safety and compatibility with powder coating systems.
Applications
This primer is suitable for use on ferrous and non-ferrous metals, including bare steel, aluminium, and galvanised surfaces. It is commonly used in industrial environments, automotive refinishing, and structural metal coating. Ensure compatibility by referring to the technical data sheet for specific substrate requirements.
Key Benefits
- Fast drying time – touch dry in 10 minutes and fully dry in 30 minutes.
- Can be overcoated at any stage once dry.
- Effective for use under most primer systems.
- Compatible with powder coatings without causing yellowing.
Limitations and Restrictions
The product is not recommended for use under epoxy primers due to potential curing interference caused by residual acids. Avoid use on improperly prepared surfaces to ensure optimal adhesion and durability.
Recommended Products
Pair with HMG cleaning solutions to prepare substrates and remove contaminants. For further protection or additional coatings, consult the full range of primers and finishing systems available.
Application Guidelines
Apply using a conventional spray gun or brush. Ensure thorough stirring before use and filter the product to remove impurities. For detailed application instructions, consult the downloadable technical data sheet.
Health and Safety
UN Number: 1263. Classified as a highly flammable liquid with potential risks for serious eye damage and skin irritation. Contains no Diisocyanates but includes components that may cause respiratory irritation. Always refer to the safety data sheet before use for complete handling and disposal instructions.
Product Details
10837-1003202
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Ferrous Metals
Non-Ferrous Metals - Application Method
- Brush
Spray - Colour
- Black
- Colour
- Grey
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Coverage
- 20m²/L
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 12 months
- UN Number
- UN1263
- Suitable For Use On
- Ferrous Metals
- Suitable For Use On
- Non-Ferrous Metals
- Application Method
- Brush
- Application Method
- Spray
- Manufacturer
- HMG Paints LTD
- Brand
- HMG
- Colour Family
- Grey
- Colour Family
- Black
- Site Application
- On-Site
- Dry to Recoat (@ 20-25°C)
- 30 mins
- Touch Dry/Dust Free (@ 20-25°C)
- 10 mins
Questions
Question about the product
 Alex on 2025-03-03 04:27:15 | Question: Hi, I just want to confirm the coverage of HMG CB1004 1K Etch Primer 5 litre? |
Answer from Rawlins’ Technical Team: This product has a coverage rating of 20m2 per litre, therefore a 5L tin would provide coverage of 100m2 based on a single coat application. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG CB1004 1K Etch Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage