- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG M99 Cellulose is a high quality Cellulose product for use on Classic Cars, Industrial applications. It gives excellent gloss 'from the gun' and provides fast through drying, ease of use, and gives a hard and durable dried film enabling rapid throughput of work.
- This product is for use only in industrial applications, aerosols and classic car vehicle refinishing
- 5,100+ colours available, including RAL, BS, NCS including Metallics
- For Fluorescent colours please see HMG Cellulose Fluorescent
- Excellent coverage, up to 20 square metres per litre at 20 microns DFT
- Touch Dry in 10 minutes at 20°C
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartHMG M99 Cellulose is a high quality Cellulose product for use on Classic Cars, Industrial applications. It gives excellent gloss 'from the gun' and provides fast through drying, ease of use, and gives a hard and durable dried film enabling rapid throughput of work.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Health & Safety
Features & Benefits
- This product is for use only in industrial applications, aerosols and classic car vehicle refinishing
- 5,100+ colours available, including RAL, BS, NCS
- Excellent coverage, up to 20 square metres per litre at 20 microns DFT
- Touch Dry in 10 minutes at 20°C
- Not to be used in connection with 2004/42/CE
- Not to be Used under SI2005:27773
Product Specification
Technical Data | |
---|---|
Volume Solids: | 37.9% |
VOC Content: | 0.70kgs/ltr |
SG: | - |
Viscosity: | 250 mPas |
Density: | 1.01 g/cm³ |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
Shelf Life: | 12 months from delivery date in original sealed containers |
Flash Point: | 4°C |
Film Thickness Range And Coverage
Product Data | ||
---|---|---|
Dry Film Thickness | Wet Film Thickness | |
Compliant Spray: | 20 μm | 50 μm |
Coverage: 20 square metres per litre @ 20 microns dft (Theoretical)
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
Drying Times At 20°C | |
---|---|
Touch Dry: | 10 minutes |
Fully Cured: | 45 minutes |
Surface Preparation
Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Compliant Spray Gun | |||||
Mixing Ratio: | Base: 1 | ||||
Thinner: 1 | |||||
Thinner Options: | Thinner 2641 | ||||
Thinner 2642 | |||||
Viscosity: | 30-35 seconds B4 cup | ||||
Spray Gun Setup: | 1.4 - 1.8 | ||||
Number Of Coats (Guide Only): | 2 full coats | ||||
Flash Off: | 10 minutes between coats |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use
- Suitable respiratory equipment should be worn when spraying
Data sheet
- Manufacturer
- HMG Paints Limited
- Water / Solvent Based
- Solvent
- For Use On
- Metal
- Application Method
- Spray
- Sheen
- Matt
Satin
Gloss - Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 1L
2.5L
5L - Mixing Ratio
- Compliant Spray Gun: Base 1 - Thinner 1
- Touch Dry (at 20°C)
- 10 Minutes
- Fully Cured (at 20°C)
- 45 minutes
- Recommended Thinner/Cleaner
- Thinner 2641
Thinner 2642 - Density
- 1.01 g/cm³
- Solids by Volume
- 37.9 %
- VOC
- 0.70kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Recommended Dry Film Thickness
- 20 μm
- Recommended Wet Film Thickness
- 50 μm
- UN Number
- UN1263
- Base Type
- Solvent
- Suitable For Use On
- Metal
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Product Usage Type
- Topcoat
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Anthracite Grey
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG M99 Cellulose is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2641
HMG Thinner 2641 is a medium fast thinner. Designed for use with cellulose based systems.
HMG Thinner 2642
HMG Thinner 2642 is a medium slow thinner which can be used with compatible HMG systems. For use with cellulose based systems.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...