Glixtone Fungi-Shield Anti-Mould & Black Spot Paint is a washable, decorative and highly effective fungicidal, anti-mould, matt finish paint for areas susceptible to mould and bacterial growth. It is suitable for use on any internal walls and ceilings.

Glixtone is affiliated with the National Residential Landlords Association (NRLA) as a Recognised Supplier.

Landlords face an on-going battle with properties and the infestation of mould which is both unsightly and a health hazard to their Tenants. Re-decoration is expensive, time consuming and disruptive. If Health Inspectors are notified this can also be a real problem to Landlords.

Glixtone Fungi-Shield will not stop condensation or damp, however, when applied it is impossible for mould spores to survive on its surface as the active biocide is distributed evenly over the entire paint film and will continue to kill spores on contact. Glixtone Fungi-Shield offers a long lasting solution to what can be a never ending battle. 

Available in White and 1,600+ RAL, BS and NCS colours.

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Why Does Glixtone Fungi-Shield Work?
• Do I Need A Stain Block?
• Limitations

Features & Benefits

   
• Water Based and Environmentally Friendly
• No Solvents and silicone free
• Non-toxic and odour free when dry
• Available in White and 1,600+ RAL, BS and NCS colours
• Non caustic and non-injurious to the skin
• Suitable for Walls, Ceilings, Woodwork, Bathrooms, Shower Rooms, Kitchens, Bedrooms, Living Areas
• Long-lasting solution - Mould will not grow for the life of the paint film
• Good coverage - 11-13m² per litre, per coat, depending upon type of surface (2 coats required)
• Ideal for use by Landlords who can face an on-going battle with properties and the infestation of mould which is both unsightly and a health hazard to their Tenants
• Approved by the National Residential Landlords Association (NRLA)
• For detailed information please see the Product Data Sheet and Information Sheet

Why Does Glixtone Fungi-Shield Work?

Other Fungicidal/Anti-Mould paints use an additive which is mixed into an already made Emulsion Paint. This means that not all of the paint will carry the same amount of the Fungicide which protects against Mould growth.

Glixtone use an Acrylic Resin and their own Fungicide and an Algaecide which forms a thermal barrier to areas subject to varying temperatures and condensation, e.g. kitchens, bathrooms, shower rooms, bedrooms even Living Rooms etc.

All of the constituents of the paint are added in a formulated process and dispersed to ensure that all the pigments and constituents including UV stabilisers, algaecides, and fungicides are coated evenly in the paint blend to produce a paint that is consistent, stable and which will promote all of its anti-fungal properties.

The paint is tested and fine-tuned to ensure that its application properties are fully utilised.

This means that the active anti-fungal biocidal components are evenly bonded to the active constituent of the paint to ensure that it is evenly distributed when coated out to prevent mould infestation.

This ensures that every part of Glixtone Fungi-Shield carries the same amount of the active biocide and when applied every part of the surface will be protected.

Do I Need A Stain Block?

A stain block is only required if there is any other staining apart from Blackspot/Mould on the surface to be painted, such as water damage etc.

Limitations

• Not recommended for use in extremely humid conditions or where frequent scrubbing occurs
• Please Note: If Glixtone Fungi-Shield coatings are over-painted with anything other than Glixtone Fungi-Shield products, the fungicidal properties will be lost
• Please refer to the Safety Data Sheet before use