Blue Diamond Anti-Slip GRP Flat Sheet is an ideal immediate solution for proving highly effective anti-slip flooring to minimise the risk of slips, trips and falls. Designed to be fitted directly onto floors, stairs, bridges, ramps and other trafficked surfaces, the simple design allows for quick and easy installation, ensuring limited downtime and disruption.

Quick Links - Click To Jump To Section:

• Suitability
• Application
• Cleaning
• Life Expectancy

Suitability

• Slip and wear resistant, suitable for areas of heavy footfall
  • Tested to BS7976.2 - PTV ‘Extremely Low’ for wet and dry
    conditions, PTV ‘Low’ for oily and greasy conditions
• Resistant to chemicals and oils, suitable for oily and greasy areas
• Suitable for dry or wet areas
  • Coefficient of Friction (CoF): Dry 73; Wet 72 and Oil 63
• Excellent resistant to voltage, making the sheets ideal for use in high voltage areas
• Suitable for wheelchairs, trollies and heavy duty loads
• Flame retardant
  • Tested to DIN 4102, Class B2
  • Ignitability - tested to EN ISO 9239-1:2010
• High UV Resistance
• Temperature resistant from -50°C to +110°C

Application

It is essential that any damage or undulations to the receiving substrate are remedied to ensure the flat sheet will be on a flat, even and damage free surface. If using Blue Diamond GRP Adhesive, clean the substrate thoroughly to remove any oil, grease, dust or loose particles, making sure the underside of the flat sheet is clean, dry and dust-free too.

Run a 6mm bead of adhesive around the underside perimeter of the flat sheet 15mm in from the edges and cross hatch at about 200mm apart.

Using hand pressure, bed the flat sheet into position evenly.

Anti-slip flat sheets can be drilled and effectively secured using pozi self-tapping screws. Fixing is generally recommended at approx. 30mm in from any edge and at a maximum of 400mm centres.

Cleaning

Being a highly durable material, using a stiff brush will normally be sufficient to remove everyday dirt and debris, and for more stubborn dirt, wash with warm water and a mild detergent. A pressure washer on a low-pressure setting can also be used, however, care should be taken to ensure that this does not harm the integrity of the fixings being used, likely to be screws and/or adhesive.

We recommend always testing any cleaning method and liquids on a small inconspicuous section before applying to the full area. Any spills should be cleaned immediately in line with the product data sheets and the company’s own safety procedures.

Please note, yellow flat sheets can become discolored if not cleaned properly. To maintain a clean finish, having a regular cleaning program in place is essential.

Life Expectancy

Blue Diamond Anti-Slip GRP Flat Sheets have a design life of 10+ years, however, the life expectancy of any flooring product will be dictated by the nature and volume of the traffic it receives. Factors such as footwear type and material, weight of individual, pedestrian or non-pedestrian traffic, and any contamination such as dirt or grit are all factors that will influence the life term through natural wear and tear of the GRP.