Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Application Notes
• Limitations

Features & Benefits

• High Bond strengths for heavyweight fixings or economical design
• No additional mixing equipment required
• European approval according to EAD 330499-00-0601, anchoring in concrete (which supersedes ETAG 001 option 5) includes fire testing, threaded rod only, 120 minutes and C1 & C2 seismic approval
• Does not apply expansive force to the substrate
• Fixings can be spaced closer to edges than mechanical anchors
• Low VOC
• Tested with diamond drilled bore holes 
• Waterproof, protecting the fixing from corrosion
• Slow gel times allow for more complex procedures
• Resistance to a wide variety of chemicals
• 24 month shelf life
• Please refer to the Product Data Sheet for full details of:
  • Properties
  • Specification Clause
  • Standards Compliance 
  • Product Installation
  • Estimating
  • Storage
  • Health and Safety
  • Design Criteria
• Refer to the data sheets tab above for application guides and ETAs for concrete, diamond drilled fixings and post-installed rebar

Uses:

• For concrete (solid, porous and light), masonry and hollow bricks
• Accredited for use in dry, damp and flooded concrete substrates
• Can be used with cracked concrete
• Fixing of post installed reinforcement 
• Anchoring of threaded rod fixings
• Anchoring of internal threaded rod sleeves
• Internal, external and submerged conditions
• Can be applied to almost any size of fixing
• For horizontal, vertical and overhead application
• Bonding and surface crack sealing applications

Application Notes

• Can be applied with Lokfix E77 application gun
• Supplied in boxes of 12 no. 385ml cartridges, each supplied with a single mixer nozzle
• Cartridge temperature should be between +15 to +30ºC for optimal use. The substrate temperature can vary significantly from the ambient temperature
• Wet resin should be removed from tools and equipment using Fosroc Solvent 102 immediately after use

Gel and Full Curing Times

Note: For optimal use the cartridge temperature should be between +5ºC to +40ºC. Note general storage conditions. Be aware that the substrate temperature can vary significantly from the ambient temperature. The tables are for dry conditions. In wet/damp conditions, the gelling and fixing times will double.

Limitations

• Load calculations to be taken by a qualified engineer
• For designing under conditions where seismic forces or fire is a consideration, please consult the relevant certification to make suitable adjustments for loading
• For designing under conditions where extended service life, seismic forces or fire is a consideration, please consult the relevant certification to make suitable adjustments for loading
• May stain decorative stone. Please check suitability before using for such applications

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.