- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- A solvent-based, adhesive primer and topcoat in one - 4,400+ colours available.
- For internal/external use - Quick drying.
- Good adhesion, lead and chromate free.
- Direct application to many surfaces, including wood, metal, uPVC, MDF, masonry, tiles, plastic, old concrete and more.
Product customisation
Don't forget to save your customization to be able to add to cartPlease always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Wood
Metal
Tiles
UPVC
MDF
Masonry
PVC
Concrete
Zinc
Aluminium - Sheen
- Gloss
- Pack Size
- 8 x 400ml Aerosol (TR and WH Base only)
20 x 400ml Aerosol (TR, WH, YE and WL Base) - Application
- Aerosol Spray
- Dry to Handle (at 20°C)
- 8 hours (at 20°C)
- Coverage
- 9-10m² per litre
- Recommended Thinner/Cleaner
- Rust-Oleum Thinner 160
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 5°C
- Heat Resistance (up-to)
- 80°C (dry heat), at elevated temperatures discoloration may occur.
- VOC
- 420 g/l
- Touch Dry
- 4 Hours (at 20°C)
- Finish
- Gloss
- Recommended Dry Film Thickness
- 62 μm
- Recommended Wet Film Thickness
- 105 μm
- UN Number
- UN1950
- Colour(s)
- Fully Tintable
- Base Type
- Solvent Free
- Base Type
- Solvent-Free
- Suitable For Use On
- MDF
- Suitable For Use On
- UPVC
- Suitable For Use On
- Plastic
- Suitable For Use On
- Concrete
- Finish
- Gloss
- Application Method
- Aerosol
- Usages
- Multi-Surface
- Product Usage Type
- Primer & Topcoat
- Colour Family
- Beige
- Colour Family
- Yellow
- Colour Family
- Green
- Colour Family
- Black
- Colour Family
- Red
- Colour Family
- White
- Colour Family
- Pink
- Colour Family
- Cream
- Colour Family
- Violet
- Colour Family
- Purple
- Colour Family
- Grey
- Colour Family
- Off-White
- Colour Family
- Blue
- Colour Family
- Magnolia
- Colour Family
- Brown
- Colour Family
- Anthracite Grey
- Colour Family
- Neutral
- Colour Family
- Orange
- 1. Project Type
- Aerosols & Spray Paint
- 2. Product Type
- Spray Paint For uPVC
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum Spray Paint for uPVC is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum Thinner 160
High dilution capacity thinner. Can be used on various Rust-Oleum coatings and as a strong glue remover. Long shelf life of up to 5 years when stored correctly. For professional use.
Rust-Oleum Mathys 108 Surfa Etch Solution
High performance etching solution. For use on smooth concrete, masonry, galvanised steel, and aluminium. Improves adhesion of coatings. Neutralises alkaline salts. Removes 'white rust' from metal. Non-flammable. Professional use only.
Rust-Oleum Mathys ND14 Cleaner Degreaser
Non-flammable, virtually odour-free cleaning/degreasing solution used to remove grease, oil, proteins, dirt and more from coated, mineral and steel substrates. Can be used as an additive for high pressure and steam cleaning Applied by synthetic sponge, cloth, brush or broom Low concentration (3-5% is sufficient for most cleaning)
Rust-Oleum CombiColor Original
4,400+ colours available. Primer and topcoat in one. For rust, bare metal and primed steel surfaces. Covers 10.3m² per litre. Lead and chromate free. Usable down to 5°C. Order a Colour Sample
Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion
Available in grey and red, can or aerosol. Two-pack anti-rust primer for new or slightly rusted surfaces. For steel surfaces, provides and enhance protection against corrosion. Recoatable after 2 hours; fast drying and lead- and chromate-free. 5-year shelf life if stored properly.
Rust-Oleum 3302 CombiPrimer Adhesion Primer
Available in a transparent blue finish. Highly effective adhesion primer for ensuring smooth surfaces are coatable. For galvanised steel, stainless steel, aluminium, copper, glass, and porcelain. High coverage of 50 m²/L. Recoatable after just 30 minutes.
Rust-Oleum CombiColor Multi-Surface
4,400+ Colours. Solvent-based primer and topcoat available in gloss, satin, and matt finishes. For wood, metal, mdf, masonry, tiles, most rigid plastics, and old concrete. Lead- and chromate-free. Excellent adhesion, quick drying. Professional use only.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Rust-Oleum CombiColor Original - Custom Filled Aerosol 8pk
4,400+ Colours. High-gloss aerosol spray for metal protection. For rust, bare metal, or primed steel surfaces. Rust-inhibiting. Lead- and chromate-free formula. Sag-resistant. Provides additional corrosion protection.