- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Black and aluminium.
- For BBQs and barbecue grills, fireplace equipment, space heaters, boiler fittings, hot air cannons, exhausts, engines, heat cannons, pipes, vents, etc.
- Self-priming.
- For continuous temperatures up to 650°C.
- For peak temperatures up to 750°C.
- For bare metal or slightly rusted surfaces.
Important!
- Self-priming - should not be applied on primers or coatings that are not heat resistant.
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Consumer Use
- For Use On
- Bare Metal
Blasted Metal
Rusted Metal - Application Method
- Brush
Roller
Spray - Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Pack Size
- 750ml
2.5L - Dry to Handle (at 20°C)
- 8 Hours
- Dry to Recoat (at 20°C)
- 24 hours
- Recommended Thinner/Cleaner
- Clean Equipment or Spill With Rust-Oleum Thinners 7301
- Heat Resistance (up-to)
- 750°C
- VOC
- 1015: 458 g/l max / 1078: 416 g/l max
- Shelf Life (from date of manufacture)
- 2-3 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- Spray: 1 hour / Can: 2 Hours
- UN Number
- UN1263
- Consumption
- 10-12 m² per litre at 35 - 40 µm dry
- Base Type
- Solvent-Based
- Suitable For Use On
- Barbecue Grills
- Suitable For Use On
- Rusted Metal
- Suitable For Use On
- Fireplace Equipment
- Suitable For Use On
- Hot Air Cannon
- Suitable For Use On
- Vents
- Suitable For Use On
- Pipework
- Suitable For Use On
- Boiler Fittings
- Suitable For Use On
- Bare Metal
- Suitable For Use On
- Heat Cannons
- Suitable For Use On
- BBQ
- Suitable For Use On
- Engines
- Suitable For Use On
- Exhausts
- Suitable For Use On
- Pipes
- Suitable For Use On
- Space Heaters
- Suitable For Use On
- Blasted Metal
- Finish
- Matt
- Application Method
- Roller
- Application Method
- Brush
- Application Method
- Spray
- Manufacturer
- Rust-Oleum
- Usages
- Heat Resistance
- Product Usage Type
- Topcoat
- Fastest Delivery
- Next Working Day
- Colour Family
- Aluminium
- Colour Family
- Black
- Heat Resistance
- Up To 750°C
- 1. Project Type
- Metalwork Products
- 2. Product Type
- Heat Resistant Paints
Alex on 2024-08-26 13:59:55 | Question:
Hello, can this be used to paint bricks inside a fireplace box that houses a log burner? |
Answer from Rawlins’ Technical Team:
Unfortunately this is not suitable, but assuming the bricks are clean, dry, sound and prepared as detailed in the techncial datasheet, you could consider Tikkurila Muuri as an alternative. This product is a breathable, heat-resistant paint ideal for fireplaces, firewalls and similar interior wall surfaces exposed to higher-than-normal temperatures, with dry heat resistance up to 300℃ (white, untinted only) or 180℃ (tinted colours). | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum Heat Resistant Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum 7301 CombiColor Thinner
A clear liquid thinner, ideal for use on the Rust-Oleum CombiColor product range. Provides good thinning properties for various applications. Specially formulated for air-atomised spraying CombiColor topcoats.
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...