- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- High-flow, non-shrink, cementitious grout.
- Suitable for use on concrete for grouting gap thicknesses from 10mm-100mm.
- Recommended for large stanchion baseplates, joints between pre-cast concrete panels, pumped grouting applications, grouting applications where pouring access is restricted, anchoring of reinforcing steel bars and the installation of tie bars.
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- Concrete
- Single, Two or Three Pack
- Single
- Pack Size
- 25kg
- Application
- Pour
- Pot Life (at 20°C)
- 30 Minutes
- Shelf Life (from date of manufacture)
- 12 months in sealed bags. If stored in high temperature and high humidity locations the shelf life may be reduced to less than 6 months.
- Touch Dry
- Initial set: 6 hours
- UN Number
- N/A
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Manufacturer
- Fosroc
- Usages
- Precision Grouts Cementitious
- Product Usage Type
- Grout
- Product Range
- Conbextra
- Categorised As
- Repairs > Low Temperature Grouts
- Seasonal
- Cold Weather
- 1. Project Type
- Repair Products
- 2. Product Type
- Concrete Floor Repairs
- 2. Product Type
- Mortars
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Free Flow Cementitious Grout is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Fosroc Lokfix S25
Fosroc Lokfix S25 is a two component polyester resin anchoring grout meeting the requirements of BS EN 1504-6 - Anchoring of reinforced steel bars. Suitable for use for anchoring of steel bars into concrete, brickwork, masonry and rock. Recommended applications include installation of starter bars, base plate bolts, MOT Bolts, installation...
Fosroc Conbextra TS
Fosroc Conbextra TS is a high-flow, non-shrink, thick-section, aggregate filled cementitious grout conforming to the requirements of BS EN 1504-3 Class R4. Suitable for use on concrete for free flow grouting for gap thicknesses from 75mm to 500mm. For smaller gaps please see Fosroc Conbextra HF. Recommended applications include large...
Fosroc Ancillaries
Fosroc Ancillaries are a range of application tools and accessories for use when applying Fosroc products. Range Includes: Fosroc Sealant Mixing Paddle, Fosroc Thioflex Follower Plate, Fosroc Polyurea Accessories Please see below for detailed information and order references where applicable