- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Low-sheen red-brown epoxy primer.
- Good adhesion to steel and galvanized steel, industrial and marine applications.
- Suitable for touching up of weld seams and damages of epoxy coatings during construction.
- Can be overcoated with most alkyd-, chlorinated rubber-, vinyl-, epoxy- and two-component polyurethane coatings.
- Suitable on wet blast cleaned substrates (damp or dry).
- Compatible with well-designed cathodic protection systems.
More Features & Benefits
- Unlimited recoating intervals are possible when overcoating with epoxy coatings
- Good flow and wetting properties
- Good water and corrosion resistance
- Recommended for:
-
- Immersion exposure
- IMO-MSC.215(82) requirements for water ballast tanks
- Atmospheric exposure
Refer to the Product Data Sheet (downloadable from the "Data Sheets" tab above) for more information on:
- Technical Data
- Recommended Substrate Conditions and Temperatures
- System Specification
- Instructions For Use
- Spreading Rate and Film Thickness
- Curing and Overcoating Times
- Safety Precautions
Limitations
- Adequate ventilation must be maintained during application and curing
Data sheet
- Manufacturer
- PPG
- For Use By
- Professional Use
- For Use On
- Steel
Galvanised Steel
Immersion - Application Method
- Spray
Brush
Roller - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20L
- Fully Cured (at 20°C)
- 7 days
- Coverage
- 11.0 m²/l for 50 µm
5.5 m²/l for 100 µm - Min. Application Temperature
- (-5°C)
- Shelf Life (from date of manufacture)
- Base: 24 months
Hardener: 36 months - UN Number
- UN1263
- Suitable For Use On
- Steel
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Immersion
- Finish
- Low Sheen
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- PPG
- Usages
- Sag Resistance
- Usages
- Water Resistance
- Usages
- Cathodic Protection
- Product Range
- SigmaCover
- Colour Family
- Red
- Colour Family
- Brown
- Dry to Recoat (@ 20-25°C)
- 16 hours
- Non - Isocyanate
- Isocyanate Free/Non-Isocyanate
- Product Type
- Polyamide-Cured Epoxy
- Touch Dry/Dust Free (@ 20-25°C)
- 2 hours
- Product Attributes
- Anti-Corrosive
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
PPG SigmaCover 295 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
PPG Thinner 90-53
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.
PPG Thinner 91-92
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...