- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Cream and off-white gloss epoxy.
- Tank coating with good chemical resistance against a wide range of chemicals.
- Meets the requirements of EI 1541 2.2 (coating systems for aviation fuel storage tanks and pipes).
More Features & Benefits
- Short curing periods
- Good low-temperature curing
- Easy to clean
- Two-component
- High solids
- Polyamine cured phenolic epoxy coating
Refer to the Product Data Sheet (downloadable from the "Data Sheets" tab above) for more information on:
- Technical Data
- Recommended Substrate Conditions and Temperatures
- System Specification
- Instructions For Use
- Spreading Rate and Film Thickness
- Curing and Overcoating Times
- Safety Precautions
Limitations
- Minimum curing time before transport of cargoes with note 4,7,8 or 11: 3 months
Data sheet
- For Use By
- Professional Use
- For Use On
- Tanks
- Application Method
- Spray
Roller
Brush - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20L
- Mixing Ratio
- 3:1
- Fully Cured (at 20°C)
- 5 days: Minimum curing time before transport of cargoes without note 4, 7, 8 or 11
- Fully Cured (at 20°C)
- 3 days: Minimum curing time before transport of aliphatic petroleum products and ballast water and tanktest with seawater
- Pot Life (at 20°C)
- 1.5 hours
- Coverage
- 5.2 m²/l for 150 µm
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- Base: 12 months
Hrdener: 24 months - Recommended Dry Film Thickness
- 125-150 µm
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Base Type
- Polyamine Cured Phenolic Epoxy
- Suitable For Use On
- Tanks
- Finish
- Gloss
- Application Method
- Spray
- Application Method
- Roller
- Application Method
- Brush
- Manufacturer
- PPG
- Usages
- Low Temperature
- Product Usage Type
- Tank Coating
- Product Range
- SigmaGuard
- Colour Family
- Grey
- Dry to Recoat (@ 20-25°C)
- 8 hours
- Industry Approved System
- Norsok
- Non - Isocyanate
- Isocyanate Free/Non-Isocyanate
- Product Type
- Phenolic Epoxy
- Touch Dry/Dust Free (@ 20-25°C)
- 3 hours
- Product Attributes
- High Solids
- For Tanks or Pipes
- Tank
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
PPG SigmaGuard 730 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
PPG Thinner 90-53
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.
PPG Thinner 90-83
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...