- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Semi-Gloss yellow/green surface tolerant high solid MIO/aluminium epoxy primer.
- Outstanding sea water resistance - primarily designed as primer for use in harsh conditions like offshore splash zone and subsea.
- Perfect for buried pipes and structural steel in heavy industrial areas.
- Meets the requirements of Norsok M-501 rev. 6, system 7A, 7B and 7C.
- Meets the requirements of ISO 12944-9, splash and tidal zones (CX and Im4) and immersion (Im4).
Product customisation
Don't forget to save your customization to be able to add to cartMore Features & Benefits
- Excellent corrosion resistance
- Excellent abrasion and impact resistance
- Continues to cure when immersed in water
- Resistant to well designed cathodic protection
Refer to the Product Data Sheet (downloadable from the "Data Sheets" tab above for more information on:
- Technical Data
- Recommended Substrate Conditions And Temperatures
- Instructions For Use
- Spreading rate and film thickness
- Overcoating interval for DFT up to 500 µm (20.0 mils)
- Curing time for DFT up to 500 µm (20 mils)
- Pot life (at application viscosity)
- Safety Precautions
- Warranty
Related Products
- Recommended thinner: Thinner 91-92
- Cleaning solvent: Thinner 90-53
Notes and Limitations
- For repair of jetties, piling etc. between tides, SigmaShield 880 ALU can be immersed within 30 minutes. Whitening can be happened, but will not affect anti-corrosive performances
- The curing time is related to the DFT of the paint and ventilation of the drying condition. High DFT and poor ventilation will slow curing
- At DFT ranging from 500 – 1000 µm (20.0 – 40.0 mils) applied in a one coat application, curing times have to be 2 - 2.5 times in order to obtain sufficient mechanical strength
- Adequate ventilation must be maintained during application and curing
Data sheet
- Manufacturer
- PPG
- For Use By
- Professional Use
- For Use On
- Steel
Structural Steel
Pipes (buried)
Subsea
Offshore Splash Zone - Application Method
- Brush, Roller, Spray
- Sheen
- Semi-Gloss
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20L
- Mixing Ratio
- 3:1
- Pot Life (at 20°C)
- 2 hours
- Coverage
- 4.3 m²/l for 200 µm
- Max. Application Temperature
- 40°C (104°F)
- Min. Application Temperature
- (-5°C)
- Shelf Life (from date of manufacture)
- Base & hardener: at least 24 months when stored cool and dry
- UN Number (Activator)
- UN3469
- UN Number (Base)
- UN1263
- Base Type
- Solvent-Borne
- Suitable For Use On
- Offshore Splash Zone
- Suitable For Use On
- Steel
- Suitable For Use On
- Subsea
- Suitable For Use On
- Structural Steel
- Suitable For Use On
- Pipes (buried)
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Primer
- Product Range
- SigmaShield
- Brand
- PPG
- Colour Family
- Aluminium
- Dry to Recoat (@ 20-25°C)
- 3.5 hours
- Seasonal
- Cold Weather
- Industry Approved System
- Norsok
- Product Type
- Epoxy
- Touch Dry/Dust Free (@ 20-25°C)
- 3 hours
- Product Attributes
- High Solids
- Product Attributes
- Anti-Corrosive
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
PPG SigmaShield 880 Alu is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
PPG Thinner 90-53
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.
PPG Thinner 91-92
This thinner has been developed by PPG Protective and Marine Coatings for use with selected paint products.