- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Elastomeric cementitious flexible coating.
- Bridges minor cracks and protects conacrete or other mineral substrates from water penetration and carbon dioxide diffusion.
- Can also be used as a crack isolation membrane on concrete floors or screeds.
- Suitable for surface protection systems principles 1.3, 2.2,,8.2 as defined in BS EN 1504-2.
- Pre-packaged materials only requiring mixing on site.
More Features & Benefits
- Brush, trowel or spray applied, normally in two coats.
- Maintains elastomeric properties under immersion to accommodate movement in cracks.
- Good resistance to abrasion, freeze/thaw cycles and de-icing salts.
- Excellent adhesion to sound prepared concrete and masonry substrates, as well as steel.
- Dense matrix offers low permeability to water and high diffusion resistance to carbon dioxide gas.
- 2mm is equivalent to 135mm of concrete cover.
- Can be applied to green concrete.
- Water-based and free from hazardous solvents, ideal for use in confined spaces. Non-toxic when cured.
- Barrier to root penetration, suitable for green roofs.
Refer to the Product Data Sheet (downloadable from the "Data Sheets" tab above) for more information on:
- Application Top Tips
- Application Instructions
- Preparation
- Priming
- Mixing
- Placing
- Reinforcement
- Curing
- Cleaning and Storage
- Yield and Coverage
- Health and Safety
- Technical Data
Related Products
- In addition to substrate saturation, roofs and decks must also be sealed with Cemprotec EF Primer.
- Other highly porous substrates may benefit from additional sealing with Cemprotec EF Primer.
- Protection from strong winds - Cure-Seal WB.
Notes and Limitations
- Only apply to substrates which are free of water pressure from behind the coating.
- Special attention must be paid to curing in hot, sunny or windy condition to prevent skinning.
Data sheet
- For Use By
- Professional Use
- For Use On
- Concrete
Concrete Roofs
Concrete Decks - Application Method
- Brush
Trowel
Spray - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 30KG
- Minimum Applied Thickness
- 2 x 1mm vertical or overhead
1 x 2mm floors or decks - Mixing Ratio
- 1:1
- Coverage
- 18.8 litres per 30kg
30kg covers 9.4m² at 2mm thickness. - Min. Application Temperature
- 3°C
- Shelf Life (from date of manufacture)
- 24 months
- Working Time
- 45 minutes at 20°C
- Suitable For Use On
- Concrete
- Suitable For Use On
- Concrete Roofs
- Suitable For Use On
- Concrete Decks
- Application Method
- Brush
- Application Method
- Spray
- Application Method
- Trowel
- Manufacturer
- Flexcrete
- Usages
- Repair
- Product Usage Type
- Mortar
- Brand
- Flexcrete
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Flexcrete Cemprotec Elastic is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Flexcrete Cure-Seal WB
Water-based curing compound and clear sealer for Flexcrete Repair and Protection Systems. Used as a curing membrane (conforms to the requirements for water retention given in ASTM C309), as a sealer coat for concrete, and as a clear lacquer which can be applied to damp but surface-dry substrates to form a tough, glossy finish. BBA Approved,...
Flexcrete Cemprotec EF Primer
Water-based, modified styrene acrylic copolymer sealer and primer that stabilises and seals cementitious and asphalt substrates, used to to stabilise and seal cementitious and asphalt floors prior to the application of Flexcrete cementitious coatings. Purpose-deigned to minimise the risk of outgassing. Single-component, material is supplied...