- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 9 colours.
- Ready-mixed, anti-slip coating.
- Provides a rough, slip-resistant finish when dry.
- For wood, metal, concrete, GRP, and other suitably prepared surfaces.
- Internal or external use.
- Ideal for areas with foot or light truck traffic.
Description
Teamac Suregrip Deck Paint
A premium-grade, modified alkyd paint that delivers outstanding performance in creating a safe, slip-resistant surface. It is ideal for use in areas where safety is paramount, such as walkways, ramps, and industrial flooring. The paint is easy to apply using a brush or roller and dries to a durable, aggregated finish that enhances traction, even in wet conditions.
Application and Usage
The coating can be applied to a wide range of surfaces including wood, metal, concrete, and GRP, making it versatile for various environments. Before application, ensure that all surfaces are clean, dry, and free from contaminants. For the best results, prime the surface with the appropriate primer, such as Teamac Wood Primer for wood or Teamac Zinc Phosphate Metal Primer for ferrous metals.
- Application Method: Apply using a brush or short to medium pile roller.
- Drying Time: Touch dry in 6 hours, hard dry in 24 hours at 20°C. Full hardness is achieved in 5-7 days.
- Overcoating Time: Minimum 16 hours, ideally overnight.
- Do not thin the product. Stir thoroughly before use, avoiding mechanical agitation.
- Ensure adequate ventilation during application and drying.
Restrictions and Limitations
While this coating is highly effective in enhancing safety, it should not be used in environments with high humidity during application, as this can adversely affect drying and performance. Additionally, do not apply in temperatures below 10°C or above 25°C. Avoid using on surfaces exposed to strong chemicals or continuous immersion in water. Always follow the recommended surface preparation and application guidelines to ensure optimal performance.
For surfaces that require a smoother finish, consider using Teamac Deck Paint as a preceding coat. For additional protection against corrosion on metal surfaces, use Teamac Zinc Phosphate Metal Primer before applying this coating.
Health and Safety
- UN Number: 1263
- Contains hydrocarbons and other compounds that may cause drowsiness or dizziness. Always wear appropriate personal protective equipment, including gloves and eye protection, and ensure good ventilation. Do not use near open flames or other sources of ignition. Dispose of any waste responsibly and in accordance with local regulations.
Product Details
1270-920343
Data sheet
- Manufacturer
- Teamac
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Wood
Metal
Concrete
GRP - Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 1L
5L - Dry to Recoat (at 20°C)
- 16 Hours
- Coverage
- 6-10m² per litre
- Recommended Thinner/Cleaner
- Thinners 14
- Solids by Volume
- 58 - 62%
- VOC
- 343 g / litre
- Touch Dry
- 6 Hours
- Finish
- Aggregated
- Recommended Dry Film Thickness
- 60
- Recommended Wet Film Thickness
- 100
- UN Number
- 1263
- Full Cured (at 22°C)
- 5 - 7 Days
- Base Type
- Solvent-Based
- Suitable For Use On
- Metal Boat Decks
- Suitable For Use On
- Wooden Boat Decks
- Suitable For Use On
- Wood Boat Decks
- Suitable For Use On
- Metal
- Suitable For Use On
- Concrete
- Suitable For Use On
- Wood
- Suitable For Use On
- Wooden Floors
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Coated Surfaces
- Suitable For Use On
- Metal Floors
- Suitable For Use On
- Wood Floors
- Suitable For Use On
- GRP
- Suitable For Use On
- GRP Floors
- Suitable For Use On
- Boat Decks
- Finish
- Aggregated
- Application Method
- Brush
- Application Method
- Roller
- Manufacturer
- Teamac
- Components
- 1K
- Product Usage Type
- Anti-Slip
- Product Range
- Suregrip
- Type of Wood Finish
- Wood Paint
- Colour Family
- Brown
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Cream
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Anti-Slip Texture
- Coarse Texture
- Product Type
- Alkyd
Questions
Question about the product
Andy
on
2024-06-10 11:09:11
| Question:
Hi there How mamy coats are recommended for this product. Would a prior, and or an after coat, or both, of teamac gloss be recommended. Finally what type of roller should be used to apply this product.??? I look forward to your reply, thank you |
Answer from Rawlins’ Technical Team:
Assuming the surface is clean, dry, sound and prepared as detailed in the techncial datasheet, if applying to a sound, existing coating, abrade the coating before applying 2 coats of Teamac Suregrip Deck Paint. If painting bare wood, Teamac Penetrating Wood Primer is recommended as the Primer coat, Teamac QD Zinc Phosphate Metal Primer for ferrous metal substrates and Teamac Deck Paint on GRP decks as the Priming coats prior to two coats of this product. Short/Medium roller or brush application is recommended to achieve the desired finish. | |
|
spencer Gransby
on
2023-12-25 01:49:48
| Question:
Hi, I want to coat two different surfaces with anti-slip paint, but would preferably use just one paint. I am painting some galvanised stairs and some old sleepers used as edging on a drive. is there just one paint I could use for this please? |
Answer from Rawlins’ Technical Team:
No, this isn't something we could recommend. Assuming the sleepers are bare concrete sleepers that are subject to only foot traffic, we'd recommend applying Coo-Var Acid Etch to prepare and clean the concrete, rinsing away with clean freshwater and allowed to dry fully. You will need to then Prime the concrete with a 10% thinned coat of Coo-Var Floor Paint, thinned with the use of Teamac Thinner 14, before 2 full coats of Coo-Var Suregrip Anti-Slip Floor Paint to finish, allowing a minimum 24 hours after coating to walk-on, and fully cured within 5-7 working days. The galvanised steel should be prepared as detailed in the application instructions, and T-Washed with the use of Teamac Mordant Solution, primed with Teamac Zinc Phosphate Primer followed by 2 finishing coats of Coo-Var Suregrip Anti-Slip Floor Paint. | |
|
Jane Antoni
on
2023-02-25 14:32:10
| Question:
Hi, we want to use this on the deck of our fibreglass boat. Is this a suitable product. |
Answer from Rawlins’ Technical Team:
Assuming the fibreglass is clean, dry, sound and prepared as detailed in the technical data sheet this product can be used. The area must be thoroughly sanded prior to application. | |
|
Hani
on
2022-08-06 19:27:41
| Question:
Hi there, I m looking to use this paint for my home decaking . Is this suitable, please ? Is it more durable than standard decking paint ? Do i need to do any special preparation please ? Many thanks. |
Answer from Rawlins’ Technical Team:
Unfortunately no, but assuming a clear anti-slip coating is suitable, the timber decking is bare, clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Coo-Var Suredeck Anti Slip Decking Protector | |
|
Sally
on
2021-09-09 17:39:46
| Question:
Hi, would this be suitable for stone steps in a cellar, the steps are very slippery and never seem to fully dry out? if this is not suitable, could you recommend something? Many Thanks |
Answer from Rawlins’ Technical Team:
Thank you for the enquiry, we have emailed you directly for more information. | |
|
Mathew Harker
on
2021-08-18 14:14:28
| Question:
Do you have a product suitable for decking round the edge of an internal hot tub/hydro pool, that's both protective and slip resistant? |
Answer from Rawlins’ Technical Team:
Assuming the decking is timber, it is clean, dry, sound and prepared as detailed in the technical data sheet we can recommend Smartkote Safekote. This is a barefoot friendly anti-slip paint. The first coat should be diluted 10% with Xylene. | |
|
carolyne
on
2019-11-21 11:33:58
| Question:
Would this be suitable for the floors in the back of vans used as mobile workshops - just concerned about the amount of heat that can build up in the van during sunny days. Thanks. |
Answer from Rawlins’ Technical Team:
As a more durable product that would be much easier to clean we would recommend Smartkote Protectakote UVR which can be applied on to a range of surfaces - some surfaces will need priming though prior to application. | |
|
Katherine Heath
on
2019-03-23 14:29:00
| Question:
Ho, do you do samples? We are struggling to get the colour grey we want so would like a small sample first. Thanks Katherine |
Answer from Rawlins’ Technical Team:
Samples aren't available of this product but we do have a very good colour card for this product which shows the colours and finish of the product very well. If you'd like to provide an address we can post this to you. | |
|
Stuart
on
2018-06-24 08:43:59
| Question:
Will this be ok to use on garden decking |
Answer from Rawlins’ Technical Team:
Pre-tanalised decking will eventually loose adhesion when painted, however if you wish to apply Teamac Suregrip Deck Paint, Jet wash the decking, allow to thoroughly dry and prime with Teamac Wood Primer. Finish with 2 - 3 coats of Teamac Suregrip Deck Paint. | |
|
Rita
on
2017-08-01 21:00:07
| Question:
It might sound a dull question do u think this will be ok to paint a wooden ladder in a above ground swimming pool |
Answer from Rawlins’ Technical Team:
Teamac Suregrip Deck Paint has a very coarse anti-slip texture and wouldn't be suitable for bare feet or submersion in water. If the ladder is out of water and not subject to bare feet it would be fine. | |
|
Anna
on
2017-01-26 11:59:46
| Question:
Is this available in more colours? Can the aggregate be added to any of the Teamac marine gloss topcoats? |
Answer from Rawlins’ Technical Team:
Teamac Suregrip Deck Paint is not available in any other colours than the ones listed on our website. You could use Anti-Slip Aggregates in other smooth floor paints available in a wider colour range, or you could over paint Teamac Suregrip Deck Paint with a smooth floor paint once applied to change the appearance. | |
|
Craig Daniels
on
2016-03-15 14:39:06
| Question:
Can I apply the Teamac sure grip with a spray gun? |
Answer from Rawlins’ Technical Team:
No, it is for brush and roller application only. The product has a pre-mixed aggregate in the paint and this will prevent it from being successfully sprayed. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Teamac Suregrip Deck Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Teamac Thinner 14
Clear hydrocarbon solvent. For thinning and cleaning down Teamac products. For marine paints, metal coatings, and similar surfaces.
Price
£12.80
(incl. VAT)
In Stock and Available for Delivery
Teamac Penetrating Wood Primer White
White alkyd-based wood primer. Semi-matt finish. Ideal for use on softwood. Strong adhesion properties. Reliable protection against moisture.
Price
£14.81
(incl. VAT)
In Stock and Available for Delivery
Teamac Zinc Phosphate Primer
In Red or Grey. High-performance anticorrosive metal primer. For iron, steel, and other metal surfaces such as fire escapes, metal gates, and garage doors. Usable in marine environments. Semi-matt finish. Excellent adhesion and durability.
Price
£18.98
(incl. VAT)
In Stock and Available for Delivery
Teamac Suregrip Deck Paint
9 colours. Ready-mixed, anti-slip coating. Provides a rough, slip-resistant finish when dry. For wood, metal, concrete, GRP, and other suitably prepared surfaces. Internal or external use. Ideal for areas with foot or light truck traffic.
Price
£32.02
(incl. VAT)
In Stock and Available for Delivery