Flowcoat SF41 - Premium, Two-Component Epoxy Resin Floor Coating System

Designed for industrial and commercial applications. Known for its durability and customisable slip resistance, this system is ideal for environments that demand high performance and long-lasting protection. With a range of available colours, Flowcoat SF41 can be tailored to meet specific aesthetic and functional requirements.

System Products

Order References

Key Features

• Durability: Designed to withstand harsh industrial conditions, Flowcoat SF41 provides excellent chemical resistance to acids, alkalis, solvents, alcohol, and fuel.
• Temperature Resistance: Capable of tolerating temperatures up to 70°C, it ensures reliable performance in both sustained and intermittent heat conditions.
• Customisable Slip Resistance: The slip resistance can be adjusted according to client specifications, making it suitable for a variety of surfaces and safety requirements.
• Easy Maintenance: The seamless application reduces dirt accumulation, and the surface can be easily cleaned with a mild alkaline detergent. Additionally, the end-of-life surface can be over-coated with minimal preparation.
• Certification and Compliance: Certified to EN 13813 for wear resistance, bond strength, and fire resistance (Bfl-s1), ensuring compliance with industry standards.
• Environmentally Considerate: The system is non-hazardous to health and the environment, contributing to sustainable building practices.

Application and Installation

The Flowcoat SF41 system is suitable for application on concrete or screed substrates with a minimum strength of 25 N/mm². The substrate must be free from laitance, dust, and other contaminants to ensure optimal adhesion. Installation should be carried out by a Flowcrete approved contractor to guarantee the best results. Detailed application instructions and recommendations are available upon request.

Restrictions and Limitations

• Not suitable for DIY use due to the professional training required for safe application.
• Avoid application at temperatures above 40°C or in direct sunlight to prevent degradation of the product.
• Not recommended for use on surfaces without a proper damp proof membrane; consider using Hydraseal DPM beneath the Flowcoat SF41 system if needed.

Recommended Additional Products

For enhanced performance, consider pairing Flowcoat SF41 with Flowprime for weak substrates or Hydraseal DPM for moisture control. These products work synergistically with Flowcoat SF41 to provide a comprehensive flooring solution.

Health and Safety

Flowcoat SF41 Part A is classified as hazardous with warnings for skin irritation, eye irritation, and potential allergic reactions. It is toxic to aquatic life with long-lasting effects. Handle with care, using appropriate personal protective equipment (PPE) and ensure good ventilation during application. UN number: UN3082. For full safety information, always refer to the downloadable safety data sheet (SDS).