- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A pure epoxy outfitting primer, suitable for use on a wide range of metal substrates as a primer, midcoat or finish coat in both atmospheric and immersed environments.
- Can be applied to carbon steel, stainless steel, galvanised steel, aluminium, GRP and thermally sprayed zinc
- Suitable temperature range from -196°C to +210°C
Jotun Jotacote F60 6A is a two component polyamide cured pure epoxy coating. It is specially designed as an outfitting primer where optimum adhesion to a wide range of surfaces is required.
Quick Links - Click To Jump To Section:
Features & Benefits
- Specially designed outfitting primer
- Optimal adhesion to a wide range of substrates
- Wide temperature range
- Low temperature application possible
- Can be applied to insulated and non-insulated surfaces
- IMO PSPC for WBT approved
Surface Preparation
For Stainless Steel and Aluminium: The surface shall be hand or machine abraded with non-metallic abrasives or bonded fibre machine or hand abrasive pads to impart a scratch pattern to the surface.
For Galvanised Steel: The surface should be clean, dry and free of zinc salts. If possible, blast-clean using non-metallic abrasive leaving a clean, rough and even pattern.
For Coated Surfaces: Alean, dry and undamaged compatible coating is required.
For Composite Surfaces: The surface shall be hand or machine abraded to impart a scratch pattern to the surface.
Application
The product can be applied by airless spray, brush or roller.
A brush is recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness.
A roller may be used for small areas. This method is not recommended for first primer coat. Care must be taken to achieve the specified dry film thickness.
Drying and Curing Times
-10°C | -5°C | 0°C | +5°C | +10°C | +23°C | +40°C | |
Touch dry: | 36h | 13h | 10h | 6h | 4h | 2h | 1h |
Walkable: | 72h | 28h | 24h | 19h | 10h | 3h | 2h |
Overcoatable: | 22h | 18h | 10h | 5h | 3h | 2h | |
Dried for immersion: | 10d | 7d | 4d | 3d | 2d | 1d | 12h |
Dried for service: | 14d | 12d | 10d | 7d | 3d |
Data sheet
- Manufacturer
- Jotun
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Carbon Steel
Primed Steel
Stainless Steel
Aluminium
Galvanised Steel
GRP
Zinc - Application Method
- Brush
Roller
Airless Spray - Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20L
4L (Activator Only) - UN Number
- UN1263 (A)
UN3469 (B) - Suitable For Use On
- Zinc
- Suitable For Use On
- Aluminium
- Suitable For Use On
- Stainless Steel
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- Carbon Steel
- Suitable For Use On
- GRP
- Suitable For Use On
- Primed Steel
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Airless Spray
- Manufacturer
- Jotun
- Components
- 2K
- Usages
- Adhesion Promoting
- Product Usage Type
- Epoxy Coating
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Jotun Jotacote F60 6A is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT