- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Grey self-smoothing fibre-reinforced floor screed for levelling.
- For concrete, screeds, wooden boards, underfloor heating, tiles, and bitumen.
- Rapid drying.
- Interior use.
Description
Weber Weberfloor Fibre 4310
This self-smoothing, fibre-reinforced screed is designed for both residential and commercial applications. It provides an excellent base layer for a wide range of floor coverings such as vinyl, laminate, carpet, tiles, and more. The product’s advanced formulation allows it to be used in various settings, including bonded, unbonded, and floating substrates. Thanks to its rapid drying properties, you can walk on the surface within just a few hours, and it is ready for final floor coverings within 3 days, depending on site conditions.
Application
Ideal for use on various substrates, including concrete, sand/cement screeds, anhydrite screeds, wooden boards, underfloor heating, insulation boards, and even existing tiles and bitumen. The product is not suitable for use as a wearing screed and should always be covered with a final floor finish. It should not be applied to surfaces exposed to excessive moisture without adequate preparation.
Benefits
- Can be applied manually or by pump.
- Walkable in as little as 2 hours and ready for tile application after 12 hours.
- Compatible with most types of final floor coverings.
- Low Dust Technology™ ensures a cleaner and safer working environment for applicators.
- Fibre-reinforced for enhanced durability, particularly useful for underfloor heating installations.
Preparation and Mixing
Before applying, ensure the substrate is clean, dry, and free from dust, grease, and other impurities. Priming with Weberfloor 4716 is essential to promote adhesion and prevent air bubbles. For manual mixing, use a slow-speed electric mixer and follow the specified water ratio to maintain the product's strength and consistency. Excessive water may compromise the screed's performance.
Limitations
- This product must be covered with a final floor finish and is not suitable as a wearing surface.
- Do not use in areas exposed to prolonged moisture without proper preparation.
- Follow the specified thickness requirements for different substrates to ensure optimum performance.
For the best results, always consult the downloadable data sheet for detailed application instructions and recommendations.
Health and Safety Summary
The product is not classified as dangerous under transportation regulations. Always refer to the MSDS for detailed health and safety guidelines.
Product Details
12774-1056348
Data sheet
- Interior / Exterior Use
- Interior Use
- For Use On
- Floors
Concrete Floors
Tiles
Wooden Boards
Bitumen
Vinyl
Carpet - Application Method
- Pump
- Single, Two or Three Pack
- Single
- Pack Size
- 25KG
- Coverage
- 1.7kg/ m²
- Min. Application Temperature
- 10°C
- Shelf Life (from date of manufacture)
- 12 months
- Suitable For Use On
- Tiles
- Suitable For Use On
- Floors
- Suitable For Use On
- Concrete Floors
- Suitable For Use On
- Carpet
- Suitable For Use On
- Vinyl
- Suitable For Use On
- Bitumen
- Suitable For Use On
- Wooden Boards
- Application Method
- Pump
- Manufacturer
- Weber
- Product Usage Type
- Screed
- Product Range
- Weberfloor
- Brand
- Weber
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Weber Weberfloor Fibre 4310 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT