- Reduced price
- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- General purpose gloss paint.
- Based on an alkyd-modified resin that is particularly suitable as a finish for boot-top, topside, deck and deck equipment.
- Quick-drying.
- Water and weather resistant coating.
- Can be applied over most intact alkyd paints.
- Also available in 2,600+ colours.
Description
PPG Sigmarine 48 is a general purpose gloss paint based on an alkyd-modified resin that is particularly suitable as a finish for boottop, topside, deck and deck equipment. Sigmarine 48 is particularly suitable for areas intermittently exposed to water-immersion and atmospheric conditions.
Top Features & Benefits
- A quick-drying, hard, tough, water and weather resistant coating with moderate gloss retention
- Can be applied over most intact alkyd paints
- Also available with non-skid material (supplied separately) for use on deck surfaces
- Gloss finish
Preparation & Application
Recommended Substrate Conditions and Temperatures
Substrate Conditions
- Previous suitable coat must be dry and free from any contamination
- Previous coat: surface should be sufficiently roughened if necessary
- Substrate temperature during application should not exceed 50°C (122°F)
- Substrate temperature during application should be at least 3°C (5°F) above dew point
System Specification
- SYSTEMS FOR BOOTTOP AND TOPSIDE – SYSTEM SHEET 3102
- SYSTEMS FOR SUPERSTRUCTURE AND DECK FITTINGS – SYSTEM SHEET 3104
Instructions for Use
Stir well before use. The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity. Adding too much thinner results in reduced sag resistance. Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and 1434).
Air Spray
Recommended thinner: PPG Thinner 20-05
Volume of thinner: 10 - 15%, depending on required thickness and application conditions
Nozzle orifice: 2.0 – 3.0 mm (approx. 0.079 – 0.110 in)
Nozzle pressure: 0.3 - 0.4 MPa (approx. 3 - 4 bar; 44 - 58 p.s.i.)
Airless Spray
Recommended thinner: PPG Thinner 20-05
Volume of thinner: 0 - 2%, depending on required thickness and application conditions
Nozzle orifice: Approx. 0.48 mm (0.019 in)
Nozzle pressure: 8.0 - 12.0 MPa (approx. 80 - 120 bar; 1161 - 1741 p.s.i.)
Brush/Roller
Recommended thinner: PPG Thinner 20-05
Volume of thinner: 0 – 2%
Cleaning Solvent
PPG Thinner 20-05
Safety Precautions
For paint and recommended thinners see INFORMATION SHEETS 1430, 1431 and relevant Material Safety Data Sheets. This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapour, as well as contact between the wet paint and exposed skin or eyes.
Product Data
| Data for Product at 20°C (68°F) | |||||
|---|---|---|---|---|---|
| Number of components | One | ||||
| Mass density | 1.0 kg/l (8.3 lb/US gal) | ||||
| Volume solids | White: 44 ± 3% | ||||
| VOC (Supplied) | Directive 1999/13/EC, SED: max. 400.0 g/kg. max. 453.0 g/l (approx. 3.8 lb/US gal) | ||||
| Recommended dry film thickness | 35 µm (1.4 mils) per coat | ||||
| Theoretical spreading rate | 12.6 m²/l for 35 µm (504 ft²/US gal for 1.4 mils) | ||||
| Dry to touch | 3 hours | ||||
| Overcoating interval | Minimum: 24 hours. Maximum: Unlimited | ||||
| Shelf life | At least 24 months when stored cool and dry | ||||
| Overcoating interval for DFT up to 35 µm (1.4 mils) | |||
|---|---|---|---|
| Overcoating with... | Interval | 5°C (41°F) | 20°C (68°F) |
| Itself | Minimum Maximum |
32 hours Unlimited |
24 hours Unlimited |
| Curing time for DFT up to 35 µm (1.4 mils) | |
|---|---|
| Substrate Temp. | Dry to touch |
| 5°C (41°F) | 5 hours |
| 20°C (68°F) | 3 hours |
References
- Safety Indicators (information sheet 1430)
- Safety in Confined Space and Health Safety, Explosion Hazard - Toxic Hazard (information sheet 1431)
- Safe Working in Confined Spaces (information sheet 1433)
- Directives for Ventilation Practice (information sheet 1434)
Product Details
RP-004-140
Data sheet
- Manufacturer
- PPG
- Application Method
- Brush, Roller, Spray
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 20L
- Parts
- One
- Base Type
- Alkyd-modified resin
- Solvent
- Solvent-borne
- Mixing Ratio
- -
- Suitable Substrates
- Boottop, topside, deck and deck equipment
- Key Features
- Quick-drying, water and weather resistant, can be applied over most intact alkyd paints
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 3 hours
- Dry to Handle (at 20°C)
- -
- Dry to Recoat (at 20°C)
- 24 hours
- Fully Cured (at 20°C)
- -
- Pot Life (at 20°C)
- -
- Coverage
- -12.6 m²/l for 35 µm (504 ft²/US gal for 1.4 mils)
- Recommended Thinner/Cleaner
- PPG Thinner 20-05
- Unit Contents
- -
- Compatible Primers
- -
- Compatible Topcoats
- Itself
- Max. Application Temperature
- 50°C (122°F)
- Min. Application Temperature
- At least 3°C (5°F) above dew point
- Density
- 1.0 kg/l (8.3 lb/US gal)
- Solids by Volume
- White: 44 ± 3%
- Heat Resistance (up-to)
- -
- VOC
- Directive 1999/13/EC, SED: max. 400.0 g/kg. max. 453.0 g/l (approx. 3.8 lb/US gal)
- Shelf Life (Once Opened)
- At least 24 months when stored cool and dry
- UN Number
- UN1263
- Base Type
- Alkyd
- Finish
- Gloss
- Application Method
- Spray
- Application Method
- Brush
- Application Method
- Roller
- Product Usage Type
- Topcoat
- Product Range
- Sigmarine
- Colour Family
- White
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
CLEARANCE - PPG Sigmarine 48 - BS 10 A 01 Gloss White 5L is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
