- Reduced price
- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Limited sizes, finishes and colours available. See options below for available quantities.
Teamac Antifouling D Plus discourages the growth of barnacles, weed, and other water life on the underwater areas of marine vessels. Contains a high level of cuprous oxide and a blend of biocides to give good antifouling performance.
- Designed for vessels with a max speed of 25 to 30 knots
- Excellent antifouling performance
- 5 vibrant colours to choose from
- Please note that the 20L size is only available in red
- Expected functional life of the coating is 18 to 24 months
- Suitable for domestic and commercial use
- Works on steel, wood and GRP
- H.S.E. Approval No. 7218
- This product is for Professional Use Only
Description
Teamac Antifouling D Plus is an antifouling coating for the underwater areas of marine vessels or underwater structures. Suitable for domestic and commercial vessels with steel, wood, or GRP hulls. Do not use on aluminium vessels.
Teamac Antifouling D Plus is a modified composition containing a high level of cuprous oxide to give good antifouling performance. Designed for vessels with a max speed of 25 to 30 knots. Expected functional life of the coating is 18 to 24 months. H.S.E. Approval No. 7218.
This product is for Professional Use Only.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Mixing
- Application Conditions
- Application Methods
- Health & Safety
Features & Benefits
- Suitable for domestic and commercial vessels
- Excellent Performance
- Available in 5 colours
- Designed for vessels with a max speed of 25 to 30 knots
- Suitable for domestic and commercial use
- Works on steel, wood and GRP
- H.S.E. Approval No. 7218
- Do not use on aluminium vessels
Product Specification
| Technical Data | |
|---|---|
| Volume Solids | 57 - 60% |
| VOC Content | 280 - 320 g/litre |
| Specific Gravity | 1.45 - 1.65 @ 20°C |
| Finish | Semi-gloss |
| Viscosity | 4.5 Poise @ 25°C |
| Flash Point | 38°C (closed cup) |
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |
| Maximum | 60 µm | 100 µm | 10 m2/litre. 60 microns dft. Based on brush or roller application. |
| The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application. | |||
Drying Times
| Drying Times At 20°C/RH 50% | |
|---|---|
| Touch Dry: | 3 Hours |
| Dry To Recoat: | 16 Hours |
| Fully Cured: | 18 Hours |
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Surface Preparation
- Do not use on aluminium vessels.
- Bare Surfaces: On exposed metal and wood, prime first with at least 2 coats of Teamac Metaclor Underwater Primer (but not more than 3). On GRP lightly abrade exposed surfaces and apply 2 coats of Teamac Metaclor Underwater Primer.
- New steel: Abrasive blast clean to Sa2½ and apply Teamac Metaclor Underwater Primer. If applying onto shop-primed steel ensure that surface is dry and clean, and areas of damaged primer are suitably cleaned prior to the application of the Teamac Metaclor Underwater Primer.
- Maintenance: Remove all loose and damaged existing coating and all marine growth. High pressure wash with fresh water. Areas of breakdown should be blasted or power tool cleaned. Touch up with Teamac Metaclor Underwater Primer to the full existing film thickness. Prior to the application of the full coat ensure that surface is clean and free of all contaminates.
- Always apply at least 2 coats of Teamac Metaclor Underwater Primer
Mixing
Mix well before use.
Application Conditions
As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination.
Application Methods
| Method | Airless Spray | Conventional Spray | Brush | Roller |
|---|---|---|---|---|
| Yes | No | Yes | Yes |
- Always apply at least 2 coats of Teamac Antifouling D Plus
- This product is for Professional Use Only
- Nozzle Size: 0.017" - 0.021"
- Thinners (Max vol): Thinners 17 (5%)
Health & Safety
This product is for Professional Use Only
Users must comply fully with all their legal responsibilities under the Control of Pesticides Regulations 1986 (as amended), including complying with all conditions of approval. H.S.E. Approval No 7218. Launch time after painting - minimum 8 hours, maximum 3 months if shrouded from direct sunlight. Minimum 2 coats
See safety data sheet - Red - SDS 10417, All other colours SDS 10489
Product Details
RP-001-33
Data sheet
- For Use By
- Professional Use
- For Use On
- Steel
Wood
GRP - Application Method
- Brush
Roller
Spray - Sheen
- Semi-Gloss
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Product Certifications
- H.S.E. Approval No. 7218
- Pack Size
- 2.5L
5L
20L - Dry to Recoat (at 20°C)
- 16 Hours
- Coverage
- 10m² per litre
- Recommended Thinner/Cleaner
- Thinners 17
- Solids by Volume
- 57 - 60%
- VOC
- 280 - 320 g / litre
- Touch Dry
- 3 Hours
- Finish
- Semi-gloss
- Size
- 1 litre, 2.5 litre, 5 litre
- Recommended Dry Film Thickness
- 60
- Recommended Wet Film Thickness
- 100
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Wood
- Suitable For Use On
- Steel
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Teamac
- Components
- 1K
- Usages
- Marine Applications
- Product Usage Type
- Antifouling
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Black
Questions
Question about the product
 robert mugford on 2025-02-13 12:48:48 | Question: does professional use only mean that I as a boat owner cannot use this product ,even if I use as normal protective equipment? |
Answer from Rawlins’ Technical Team: This product is classified as a biocidal product, and due to containing an active substance known as zinc pyrithione (ZPT), the manufacturer has advised that CLP Legislation means this product can only be sold for professional use only, and not for purchase or application by consumers. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
CLEARANCE - Teamac Antifouling D Plus - Black 5L is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Teamac Metaclor Antifouling Primer
In Metallic Grey. Chlorinated rubber-based primer designed for protective coating. For wood, metal, and GRP, including marine structures, yachts, narrowboats, and cruisers. Incorporates Zinc Phosphate for enhanced protection. Reliable base coat for various antifouling systems.
Price£25.54 (incl. VAT)
In Stock and Available for Delivery
Teamac Antifouling A Plus
In White, Black, Blue, and Red. Two-pack antifouling solution designed to protect marine vessels from biofouling. For aluminium, steel, wood, and GRP hulls of marine vessels. Functional life of 18 to 24 months. Professional use only.For Reference:See our guide to applying anti-fouling paints in-line with the "Protect Collect...
Price£130.33 (incl. VAT)
In Stock and Available for Delivery
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site.Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price£12.74 (incl. VAT)
In Stock and Available for Delivery