- Reduced price
- Temporarily Out-of-Stock
- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Limited sizes, finishes and colours available. See options below for available quantities.
- 5,000+ Colours.
- Coloured coating for chemical bonding to various substrates.
- Ideal for PVC, leather, and similar surfaces.
- Excellent adhesion.
- Professional use only.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
- Chemically bonds with the surface - 10 year guarantee.
- Extremely colour stable - guaranteed to hold its colour, without excessive fading, for 5 years.
Important!
- Performance and guarantees not valid without purchase and use of the relevant cleaning products.
Description
Kolorbond Vinylkote
This specially formulated single-component coating is developed to chemically bond with PVC and leather surfaces. The product provides superior adhesion and durability, ensuring long-lasting results in both residential and commercial settings. Available in gloss, matt, and other finishes, it offers flexibility in achieving the desired look for any project.
Application & Equipment
For best results, apply this product using an HVLP spray gun. It is crucial to maintain the right air pressure, air volume, and pot pressure during application. Ensure the equipment is cleaned thoroughly between uses with a suitable solvent to prevent contamination between different colours.
Surface Preparation
Before applying, the surface must be clean, dry, and free from contaminants such as dust, grease, or oil. Sand the surface lightly if necessary to ensure better adhesion. The product chemically bonds with PVC and leather, so no primer is required. Do not use on non-PVC or non-leather surfaces as it may lead to poor adhesion or durability.
Curing Process
The coating requires an ambient flash time of 10 to 15 minutes between coats at 16°C, with a complete cure achieved after 50 minutes at 50°C. Post-cure time is 24 hours at ambient temperature. These steps ensure the best durability and finish for the coating. Avoid using the product in temperatures above 50°C as it may compromise the curing process.
Limitations & Restrictions
Do not apply the product to surfaces that are not PVC or leather. Ensure proper ventilation when using the product, and never expose the product to direct sunlight or temperatures exceeding 50°C. Keep away from heat sources and avoid static build-up that may result in a fire hazard.
Recommendations
For cleaning equipment, use proprietary gun cleaning solvents to maintain the quality of application. This product is best paired with a similar product line for finishing, or additional coatings if required. Always refer to the downloadable data sheet for detailed instructions and safety guidelines.
Health and Safety
- UN Number: 1263
- The product contains hazardous substances including BUTANONE, ISOBUTYL METHYL KETONE, and ETHYL ACETATE. It is highly flammable and may cause skin irritation. Avoid inhalation and contact with skin or eyes. Always wear protective equipment and refer to the MSDS for full safety precautions.
Product Details
RP-005-297
Data sheet
- Manufacturer
- Kolorbond
- Manufacturer
- Kolorbond
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Solvent
- For Use On
- Vinyl
Leather - Application Method
- Spray
- Sheen
- Matt
Satin - Colour
- Fully Tintable
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 400ml Aerosol
1L - Coverage
- 4m² per litre
- Recommended Thinner/Cleaner
- Gun Cleaner
- Solids by Volume
- 15.3 (Clear) to 19.8 (depending upon the colour)
- VOC
- 740 +/- 85 grams per litre
- Shelf Life (from date of manufacture)
- 1 Year
- Recommended Dry Film Thickness
- 15 - 20 microns
- Recommended Wet Film Thickness
- 75 - 100 microns (Colour)
- UN Number
- UN1263
- Specific Gravity
- 0.85 g/cm3 @ 20ºC
- Solids by Weight
- 15.5 (Clear) to 20.0 (depending upon the colour)
- Flashpoint
- 4ºC (Measured with Seta Closed Cup)
- Oven Cure
- 50 minutes @ 50°C
- Post Cure
- 24 hours @ ambient temperature (16°C)
- Flash Time (Between Coats)
- 10 - 15 minutes @ ambient temperature (16° C)
- Base Type
- Solvent-Based
- Suitable For Use On
- Leather
- Suitable For Use On
- Vinyl
- Finish
- Matt (10%)
- Finish
- Satin (30%)
- Application Method
- Spray
- Manufacturer
- Kolorbond
- Components
- 1K
- Usages
- High UV Resistance
- Product Usage Type
- Topcoat
- Product Range
- Vinyl
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Chartwell Green
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Seasonal
- Cold Weather
- Seasonal
- Warm Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
CLEARANCE - Kolorbond Vinylkote - RAL 7016 Satin 1L is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Kolorbond VinylKleen
Water-based cleaner for PVC and uPVC. Removes contaminants, silicones and oils. To be mixed with water.More Information Delivery Info
Price£21.60 (incl. VAT)
In Stock and Available for Delivery
Kolorbond VinylPrep
Solvent-based cleaner. For vinyl surfaces prior to Vinylkote application. Removes contaminants such as polish and lacquer. Promotes adhesion.More Information Delivery Info
Price£21.60 (incl. VAT)
In Stock and Available for Delivery