- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Sikagard 740 W is a one part low viscosity, reactive impregnation for concrete and cementitious substrates based on concentrated Silane emulsion. This product complies with the requirements for hydrophobic impregnation and is classified as a sealer.
- Good penetration
- Economic and easy to use
- Reduces capillary water absorption, protection against driving rain and splashing on vertical areas
- Reduction of absorption of aggressive or deleterious agents dissolved in water (i.e. chlorides)
- No change in water vapour permeability
- Increases the resistance of concrete to freeze and thaw cycles and de-icing salts
- Water-based emulsion
- Low VOC
- Resistant to sea water
- Ready to use
Please Note: This Product is made to order subject to an extended lead time of approximately 35 working days
Sikagard 740 W is a one part low viscosity, reactive impregnation for concrete and cementitious substrates based on concentrated Silane emulsion. Sikagard 740 W complies with the requirements of EN 1504-2 for hydrophobic impregnation (penetration depth class I & resistance to freeze and thaw salt stresses).
Uses:
Sikagard 740 W is classified as sealer Type 1b to the ALBERTA infrastructure and transportation specifications.
Sikagard 740 W is used as water-repellent impregnation (hydrophobic treatment) for absorbent substrates such as concrete in civil engineering or building concrete structures in both vertical and horizontal traffic area
- Suitable for protection against ingress
- Suitable for moisture control
- Suitable for increasing the resistivity
Features and Benefits:
- Good penetration
- Economic and easy to use
- Reduces capillary water absorption, protection against driving rain and splashing on vertical areas
- Reduction of absorption of aggressive or deleterious agents dissolved in water (i.e. chlorides)
- No change in water vapour permeability
- Increases the resistance of concrete to freeze and thaw cycles and de-icing salts
- Water-based emulsion
- Low VOC
- Resistant to sea water
- Ready to use
For more details please download the product data sheet from the 'DATASHEETS' tab above.
Data sheet
- Manufacturer
- Sika
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Concrete
Cement - Application Method
- Spray
Airless Spray
Brush
Roller - Pack Size
- 20L
- Application
- Brush, Roller, Spray
- Coverage
- 6.3 - 9.5m² per litre
- Min. Application Temperature
- 5°C
- Touch Dry
- 6 hours
- UN Number
- N/A
- Colour(s)
- Clear
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Cement
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Application Method
- Airless Spray
- Manufacturer
- Sika
- Components
- 1K
- Usages
- Concrete Repair
- Product Usage Type
- Corrosion Inhibitor
- Colour Family
- Clear
- Categorised As
- Masonry Impregnation & Waterproofers
Questions
Question about the product
Maurice Langdon on 2020-12-13 23:42:50 | Question:
Have a situation where Sika 740W has spilled over onto powder coated surfaces. Intermittant spot stains showing - how do these get cleaned off without affecting the powder coating |
Answer from Rawlins’ Technical Team:
The manufacturer recommends cleaning with water immediately after use. Hardened / cured material can only be mechanically removed. | |
William Ferdinandsen on 2017-02-27 17:07:42 | Question:
In general, how long does the product last on a new bridge in a marine environment? In other words, how long before the product should be re-applied?
Thank you,
Bill |
Answer from Rawlins’ Technical Team:
Sika do not offer design lives for these types of products, but it is fairly common place for hydrophobic impregnations to be re-applied every 2-3 years. However that is if the product is used singularly instead of as a full part of a concrete repair system. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Sikagard 740 W is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT