Jotun SeaForce 90 is the optimal choice if you are looking for a fuel saving antifouling at a cost effective level. With a predictable and effective performance, Jotun SeaForce 90 limits the hull deterioration caused by fouling throughout the whole sailing interval. This is achieved through a controlled and predictable polishing rate, combined with an effective mix of biocides.

Jotun SeaForce 90 is a one component acrylic, hydrolysing antifouling coating based on ion exchange technology that provides very good fouling protection and improved hull performance. This is achieved through self polishing characteristics reducing hull deterioration, friction and speed loss. Jotun SeaForce 90 should be used as finish coat in immersed environments only and is suitable on approved primers and tie coats on aluminium and carbon steel substrates. It can be applied at sub zero surface temperatures.

Features & Benefits

• Fuel cost saving alternative to a budget-friendly price - Throughout the whole sailing interval, Jotun SeaForce 90 will reduce hull deterioration, friction and hence the speed loss experienced from these factors. Fuel consumption will therefore also be reduced. This fuel saving is achieved through a controlled and predictable polishing rate combined with an effective mix of biocides.
• The optimal commercial solution - Jotun SeaForce 90 is suitable if you are looking for the highest performance available within your inflexible operational budget. Used with an anticorrosive primer system suitable for purpose with Jotun Safeguard Universal ES as sealer coat/tie coat.
• Extensive experience - 30 million litres of SeaForce have been painted at more than 15,000 vessels in the last 8 years.

Approvals and certificates

• Compliant with IMO Antifouling System Convention AFS/CONF/26.

Additional certificates and approvals may be available on request.

Typical use

Marine:
Recommended for under water hull in newbuilding and dry docking. Designed as an efficient solution for vessels trading at a wide range of speed and medium to high activity. The product can be used for long service periods up to 60 months as a part of a complete coating system.

Typical Trade:
Suited for vessels operating in global service, including fresh water exposure during newbuilding outfitting. Recommended for deep sea trade.

Disclaimer

Jotun antifouling products are intended for professional use only and have been specially formulated with increased levels of copper oxide as well as strong biocides for use on vessels and structures operating for long periods in testing conditions where extended service intervals are required. 

The Health & Safety Executive (HSE) deem them 'For professional use only'. This means we can only sell Jotun antifouling products to customers who confirm at the point of ordering that they will be applied in accordance with the appropriate HSE regulations. 

‘Professional users are those who use such products in the course of their work. Under COPR they must have received adequate instruction and guidance in using the pesticide and be competent in its use, in order to protect human beings, other creatures and plants, safeguard the environment and avoid pollution of water. As a minimum pest controllers should be aware of pesticide legislation and use, and how to carry out risk assessment under the Control of Substance Hazardous to Health Regulations (COSHH). However there is no requirement for users of non-agricultural pesticides to have gained a 'certificate of competence'. Users should follow the relevant instructions on the use of any approved pesticide, including instructions on safe disposal.' 

Customers interested in buying Jotun antifouling products should contact us on 0113 2455450 or [email protected] as these products cannot be ordered online.