- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.
- High solids epoxy intermediate
- Micaceous Iron Oxide variant for additional barrier protection
- 200μm (8 mils) dft possible in one coat
- Low VOC
- Approved for use in NORSOK M501 System 1 specifications
- Designed to provide optimum adhesion for top coats
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties.
Intended Uses:
- For use as a high build epoxy coating to improve barrier protection for a range of anti-corrosive coating systems in a wide range of environments including offshore structures, petrochemical plants, pulp and paper mills and bridges.
- Suitable for use in both maintenance and new construction situations as part of an anti-corrosive coating system.
- The micaceous iron oxide variant improves long term overcoating properties, better facilitating application in the fabrication shop, prior to shipping, with final overcoating on site.
Features & Benefits:
- High solids epoxy intermediate
- Micaceous Iron Oxide variant for additional barrier protection
- 200μm (8 mils) dft possible in one coat
- Low VOC
- Approved for use in NORSOK M501 System 1 specifications
- Designed to provide optimum adhesion for top coats
Data sheet
- Manufacturer
- International
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent
- For Use On
- Steel
- Application Method
- Airless Spray, Spray, Brush, Spray
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20L
- Coverage
- 6.4m² per litre
- Touch Dry
- 1 Hour
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Usages
- MIO
- Product Usage Type
- Mid Coat
- Product Range
- Intergard
- Colour Family
- Grey
- Colour Family
- Off White
- Dry to Recoat (@ 20-25°C)
- 5 hours
Questions
Question about the product
Chris Wilkinson on 2024-03-06 17:35:44 | Question:
Intergard 475 what is the maximum operating temperatures. through a steam pipeline . |
Answer from Rawlins’ Technical Team:
Thank you for the enquiry, please can you provide more information on the application to [email protected] so we can assist. | |
Ismail hyder on 2022-12-01 12:35:26 | Question:
Can we apply antifouling interswift 6800 on top of intergard 475HS |
Answer from Rawlins’ Technical Team:
Unfortunately this is not compatible, Interswift must be applied over a tie coat. | |
Wilfred Okome on 2021-10-26 11:55:24 | Question:
Please can intergarg 475 be use as a primer? |
Answer from Rawlins’ Technical Team:
No this is designed intermediate coat. The suitably prepared substrate should be primed first with a compatible primer, these are listed on the Technical data sheet along with the compatible topcoats. | |
Wilfred Okome on 2021-10-26 11:54:06 | Question:
Can intergarg 475 be use as a primer? |
Answer from Rawlins’ Technical Team:
No this is designed intermediate coat. The suitably prepared substrate should be primed first with a compatible primer, these are listed on the Technical data sheet along with the compatible topcoats. | |
lewis kwong on 2021-09-06 21:45:11 | Question:
Hi, May I know that Interseal 670HS is compatible with intergard 475 HS? |
Answer from Rawlins’ Technical Team:
Yes these products are compatible. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Intergard 475HS is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
International Intercure 200
International Intercure 200 is a two component epoxy zinc phosphate/micaceous iron oxide primer, formulated on proprietary polymer technology, which provides rapid cure and overcoating even under low temperature conditions. A high solids, low VOC product. As a primer for steelwork intended for use in a wide range of aggressive environments,...
International Interfine 629HS
International Interfine 629HS is a low VOC, high performance, two component, isocyanate free crosslinking acrylic finish which provides good durability in terms of colour and gloss retention. Designed as a finish coat for use in both new construction and industrial maintenance. For use in a wide variety of aggressive environments including...
International Intergard 251
International Intergard 251 is a two component epoxy anti-corrosive primer pigmented with zinc phosphate for use on properly prepared surfaces in both new construction situations and as an industrial maintenance primer for a wide range of anti-corrosive coatings systems.
International Intergard 269
International Intergard 269 is a quick drying two component epoxy primer suitable for overcoating after prolonged periods of weathering, for use at both new construction and maintenance. As a blast holding primer suitable for use in immersed and exposed conditions and overcoatable with a wide range of high performance systems. For use at...
International Intergard 475HS
International Intergard 475HS is a low VOC, high solids, high build, two component epoxy coating. Available with conventional pigmentation, or alternatively can be pigmented with micaceous iron oxide to provide enhanced overcoating properties. High solids epoxy intermediate Micaceous Iron Oxide variant for additional barrier protection...
International Intergard 740
International Intergard 740 is a two component epoxy finish coat. Suitable for brush, roller and spray application Suitable for use in a wide range of environments including offshore structures, petrochemical facilities, bridges, pulp and paper mills, and the power industry 4,800+ colours, inc. RAL, RAL Design & Effect, BS, NCS &...
International Thinner/Equipment Cleaner GTA007
International Thinner/Equipment Cleaner GTA007 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
International Thinner/Equipment Cleaner GTA822
International Thinner/Equipment Cleaner GTA822 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
International Interthane 990
International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance...
International Interzinc 22
International Interzinc 22 is a two component, rapid recoat, inorganic zinc rich ethyl silicate primer and is part of the Interzinc 22 Series of products that deliver consistently fast re-coating across a choice of 85%, 80%, 77% or 65% minimum zinc content products. The variable zinc levels allow you to tailor your choice of product to meet...
International Interzinc 52
International Interzinc 52 is a two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20. It has been designed to provide excellent corrosion resistance in both maintenance and new construction situations.
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...