Follow us on:

International Intertuf 16

International Intertuf 16

JBA016
INT1887

International Intertuf 16 is a is a one component, high build cold applied bituminous coating economical coating ideally suited for the protection of interior steel surfaces in enclosed areas such as tanks for storage of sea water, immersed piping and structural steelwork.

  • Suitable for use at low temperatures and over power tool cleaned steel where performance expectations are consistent with such preparation methods
Colour
Size
£45.96(incl. VAT)
£38.30(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

questions 2 questions about the product
Description

International Intertuf 16 is a one component, high build cold applied bituminous coating. Normally a minimum of two coats to give 250 microns (10 mils) is required to give good anticorrosive performance on water immersion.

Intended Uses

  • As an economical coating ideally suited for the protection of interior steel surfaces in enclosed areas such as tanks for storage of sea water, immersed piping and structural steelwork.
  • International Intertuf 16 is suitable for use at low temperatures and over power tool cleaned steel where performance expectations are consistent with such preparation methods.

International Intertuf 16 has the following specification approvals:

  • UK Department of Transport Item No. 141
Product Details
1887-211688

Data sheet

Manufacturer
International
For Use By
Professional Use
Interior / Exterior Use
Interior Use
For Use On
Steel
Application Method
Brush, Roller, Spray
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Product Certifications
UK Department of Transport Item No. 141
Pack Size
5L, 20L
Application
Brush, Roller, Spray
Coverage
4.2m² per litre
Touch Dry
8 Hours
UN Number
UN1263
Base Type
Bitumen
Suitable For Use On
Steel
Application Method
Brush
Application Method
Roller
Application Method
Spray
Product Usage Type
Topcoat
Product Range
Intertuf
Colour Family
Black
Categorised As
Other Paints > Low Temperature Bituminous Paints
Seasonal
Cold Weather
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)
questions Mike Napthine on 2018-07-12 11:17:51
Question: 

Hi, I have a new build narrowboat with intertuf 16 on the hull. Boat manufacturer has advised reblacking after the first year so due now really. Can you advise on what product is best. I was just going to pressure wash the hull and use the existing coats as a key where possible. TIA

Answer from Rawlins’ Technical Team:

We would recommend abrading areas where the coating is loose or missing International Intertuf 16, jet wash and apply another coat of the same over the top.

If you want longer without lifting out every year, you could get it blasted and apply International Interzone 954 by spray (to 500 microns DFT) and get 5-10 years without lifting.

questions Malc Gwilliam on 2018-02-28 15:41:03
Question: 

Please advise can Intertuf 16 be purchased in 2.5ltr or 1ltr tins Thanks Malc

Answer from Rawlins’ Technical Team:

No, only 5L or 20L.

IMPORTANT SHIPPING & DELIVERY INFORMATION

International Intertuf 16 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like
Hand & Power Tool Surface Preparation Kits for Steel

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £25.93 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery