Follow us on:

Sherwin-Williams Macropoxy M902

Sherwin-Williams Macropoxy M902

M902
SHE2190

Sherwin-Williams Macropoxy M902 (formerly known as Epigrip M902) is a low temperature curing hi-build 2-pack epoxy brushing aluminium primer coating capable of curing down to 0°C. 

  • For brush application onto hand or mechanically prepared surfaces and/or damp gingered surfaces giving excellent wetting and adhesion characteristics - see datasheet
  • Suitable for atmospherically exposed surfaces but not recommended for exposure to severe chemical environments
  • May be spray applied to blast cleaned surfaces. Recommended where low temperature curing is required or where rapid overcoating is necessary
Colour
Size
£74.22(incl. VAT)
£61.85(ex. VAT)
Quantity
Please choose your colour
In Stock and Available for Delivery (See Delivery Options Below)

questions 2 questions about the product
Description

Sherwin-Williams Macropoxy M902 (formerly known as Epigrip M902) is a low temperature curing hi-build 2-pack epoxy brushing aluminium primer coating capable of curing down to 0°C. 

Recommended Uses

  • For brush application onto hand or mechanically prepared surfaces and/or damp gingered surfaces giving excellent wetting and adhesion characteristics - see datasheet.
  • Suitable for atmospherically exposed surfaces but not recommended for exposure to severe chemical environments. 
  • May be spray applied to blast cleaned surfaces. Recommended where low temperature curing is required or where rapid overcoating is necessary. 

Endorsements

  • BS476 Part 7 - Surface Spread of Flame Material - for details of substrate/scheme, consult Technical Team.
  • Highways Agency Item No.115.
  • Approved by MoD/DRA to Def Stan 80-134.
  • Network Rail Item 7.1.5 

Recommended Buildcoat

Macropoxy M905 

Recommended Topcoats

For overcoating with epoxy products (including self overcoating), the maximum recommended interval is 28 days at 23°C. For overcoating outside this interval, consult Sherwin-Williams technical support for advice.

Where a high degree of gloss and colour retention is required overcoat with Acrolon C137V2, Acrolon C237, Acrolon 1850 and Acrolon 7300 within 7 days at aminimum dft of 50 microns or in the case of Acrolon C750V2 overcoat within 4 days. These overcoating times refer to achievement of optimum adhesion at 23°C and will vary with temperature. For overcoating with alkyd systems consult Technical Team for advice. 

Product Details
2190-274501

Data sheet

Manufacturer
Sherwin-Williams
For Use By
Industrial Use
Water / Solvent Based
Solvent
For Use On
Metal, Steel
Application Method
Airless Spray, Brush, Roller
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Two-Pack
Product Certifications
BS476 Part 7 - Surface Spread of Flame Material, Highways Agency Item No.115, Network Rail Item 7.1.5
Pack Size
2L, 5L
Pack Size
2L, 5L
Coverage
6.0m² per litre
Touch Dry
3.5 Hours
UN Number (Activator)
UN1263
UN Number (Base)
UN1263
Base Type
Epoxy
Base Type
Solvent
Suitable For Use On
Steel
Application Method
Brush
Application Method
Roller
Application Method
Spray
Usages
High Build
Usages
Moisture Tolerant
Usages
Low Temperature
Usages
Surface Tolerant
Usages
Atmospheric
Product Usage Type
Primer
Product Range
Macropoxy
Colour Family
Aluminium
Dry to Recoat (@ 20-25°C)
4 hours
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)
questions Danny Boone on 2022-10-19 08:15:57
Question: 

Want to mix small amounts what ratio 50-50?

Answer from Rawlins’ Technical Team:

The mixing ratio for this product is 1 to 1 by volume.

questions patrick mckeon on 2021-09-20 16:12:13
Question: 

if i were to use this product, would it be ok to use an riw liqud asphalt coating on top of the steel?

Answer from Rawlins’ Technical Team:

We would not recommend mixing two pack products with a single pack product such as RIW Liquid Asphalt.

We would suggest speaking to RIW regarding what primer is compatible, or checking for compatibility and adhesion prior to full application.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Sherwin-Williams Macropoxy M902 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage

You might also like
Hand & Power Tool Surface Preparation Kits for Steel

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £25.93 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery