Follow us on:

Remmers PUR Aqua Top 2K M Plus

Remmers PUR Aqua Top 2K M Plus

3631
REM2747

Remmers PUR Aqua Top 2K M Plus is a water based, textured, silk matt, transparent, 2-component sealant with good resistance to UV-light and chemicals. Class R 11 slip resistance which can be used as a slip resistant, silk matt sealant.

  • Slip-resistant
  • Lightfast
  • Water vapour diffusion capable

Please Note: This product is subject to a lead time of 14-21 Working Days

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Colour
Size
Finish
£338.10(incl. VAT)
£281.75(ex. VAT)
Quantity
Please choose your colour
The Product may be Subject to Extended Lead Times

No queries yet, leave the first!
Description

Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.

Should you require training, visit - https://www.safeusediisocyanates.eu/

Remmers PUR Aqua Top 2K M Plus is a silk matt, water based, textured, transparent sealant with class R 11 slip resistance which can be used as a slip resistant, silk matt sealant for all Remmers Epoxy and PUR Coatings and is a system component in the Remmers Flake Coating System.

Surface Preparation

  • The substrate must be firm, dimensionally stable, capable of bearing loads and free of loose constituents, dust, oil, grease, rubber marks and other substances that could interfere with adhesion.
  • The substrate must be prepared using suitable Remmers products
  • Apply the sealant within 48 hours. In the case of longer waiting times, sand the surface treated in the previous coat and remove dust.

Mixing Instructions

  • Add the entire quantity of the hardener (component B) to the basic compound (component A).
  • Mix thoroughly with a slow-speed electric mixer (approx. 300 - 400 rpm).
  • Pour the mixture into a separate container and mix again thoroughly.
  • Mix for at least 3 minutes.
  • Insufficient mixing is indicated by streaks forming
  • As soon as the mixture is ready to use, apply it in full to the prepared surface and spread it using suitable tools.

Conditions For Use

  • Temperature of the material, air and substrate: from min. +10°C to max. +25°C.
  • During the curing process, the applied material should be protected from moisture which could impair the surface and impair the adhesion.
  • Relative humidity should not exceed 80%.
  • The temperature of the substrate must be at least 3°C above the dew point temperature during application and curing.
  • Good ventilation must be ensured so that water can be released into the air.

Working time (+20°C)

Approx. 60 minutes.

Drying Time (+20°C)

Foot traffic after 8 hours, mechanical loading after 3 days, full loading capacity after 7 days.

Storage

If stored unopened in its original container in a cool, dry place and protected against frost, the product will keep for at least 6 months.

Possible System Products

Epoxy OS Color (alternative Epoxy Flex PH)

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

Product Details
2747-304073

Data sheet

Manufacturer
Remmers
For Use By
Professional Use
Interior / Exterior Use
Interior Use
Water / Solvent Based
Water
Sheen
Silk Matt
Colour
Clear
VOC Levels
Low (50-149 g/l)
Single, Two or Three Pack
Two-Pack
Pack Size
10KG
Parts
Two
Base Type
Water Based
Mixing Ratio
85:15
Touch Dry (at 20°C)
8 Hrs
Pot Life (at 20°C)
60 mins
Coverage
0.13kg per m²
Recommended Thinner/Cleaner
Water
Max. Application Temperature
25°C
Min. Application Temperature
10°C
Density
1.23 g/cm³
Solids by Volume
38%
UN Number
N/A
Base Type
Water-Based
Suitable For Use On
Decorative Flake Floors
Finish
Silk-Matt
Components
2K
Product Usage Type
Sealer
Product Range
PUR
Colour Family
Clear
Product Type
Polyurethane
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

Remmers PUR Aqua Top 2K M Plus is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT