- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Mathys Pegagraff Hydro is a clear coating designed to protect a range of bare and previously painted surfaces inside and out from graffiti attack. Can be used on floors, walls and other surfaces to create a tough, clear glaze that can be easily and frequently cleaned to remove any unwanted graffiti that may occur.
- Colourless anti-graffiti protection for porous concrete, natural stone, brick, interior wood, various coatings and paints
- Good UV resistance
- Excellent flow out
- Very abrasion resistant
- Water vapour permeable
- Acid resistant
- Alkali resistant
- Solvent resistant thus allowing easy removal of graffiti
Description
Mathys Pegagraff Hydro
Mathys Pegagraff Hydro is a clear, satin, two-component waterborne polyurethane acrylic lacquer. Mathys Pegagraff Hydro is a clear coating designed to protect a range of bare and previously painted surfaces inside and out from graffiti attack. Mathys Pegagraff Hydro can be applied by brush, roller or spray onto surfaces to floors, walls and other surfaces to create a tough, clear glaze that can be easily and frequently cleaned to remove any unwanted graffiti that may occur.
Features & Benefits
- Colourless anti-graffiti protection for porous concrete, natural stone, brick, interior wood, various coatings and paints
- Good UV resistance
- Excellent flow out
- Very abrasion resistant
- Water vapour permeable
- Acid resistant
- Alkali resistant
- Solvent resistant thus allowing easy removal of graffiti
Technical Data
- Density: ±1,04
- Gloss Level: Satin
- Gloss level at 60º: Satin gloss: 35%
- Solids content in volume: ± 40 % (Mischung)
- Solids Content in weight: ± 42 % (Mischung)
Drying Times At 20°C/RH 50%
- Touch dry: 2 hours
- Dry to handle: 4 hours
- Dry to recoat: 5 hours
- Pot Life: 10°C: 2,5 hours / 20°C: 2 hours / 30°C: 1 hour
Suitable and Unsuitable Substrates:
Painted substrates
In principle, direct application on ALL painted substrates is allowed, with exception of elastomeric coatings, i.e. Murfill. A test surface has to be realised beforehand for heat curing paints and for powder coatings.
Not painted or untreated substrates
Only on reinforced concrete (remaining humidity level < 4 %), Pegagraff Hydro can be applied directly.
Not recommended substrates
a) Do not apply Pegagraff Hydro on a mineral painted substrate where the relative humidity is higher than 6%. This concerns bricks, terra-cotta tiles, renderings, etc. In this case, a white film could be formed and more or less important adhesion loss will appear.
b) Do not apply Pegagraff Hydro directly on not painted metal substrates such as aluminium, steel, zinc, stainless steel, copper, etc.
c) Do not apply Pegagraff Hydro directly on bare wood for exterior applications.
d) Do not apply Pegagraff Hydro directly on rough surfaces such as plaster, rough brickwork (masonry), etc.
Product Details
290-182928
Data sheet
- Manufacturer
- Mathys
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Hybrid
- For Use On
- Concrete
Stone
Brick
Wood
Compatible Paints - Application Method
- Brush
Roller
Airless Spray
Air-Atomised Spray - Sheen
- Satin
- Colour
- Clear
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 2.5L, 5L
- Dry to Handle (at 20°C)
- 4 Hours
- Dry to Recoat (at 20°C)
- 5 Hours
- Coverage
- 6.5m² per litre
- Density
- ±1,04
- Solids by Volume
- ± 40 % (Mischung)
- VOC
- 20 g/l
- Shelf Life (from date of manufacture)
- At least 1 year from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 2 Hours
- Recommended Dry Film Thickness
- 50 µm
- Recommended Wet Film Thickness
- 125 µm
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Brick
- Suitable For Use On
- Stone
- Suitable For Use On
- Wood
- Suitable For Use On
- Compatible Paints
- Finish
- Satin
- Application Method
- Roller
- Application Method
- Spray
- Application Method
- Brush
- Components
- 2K
- Permanent / Semi-Permanent
- Permanent
- Usages
- Multi-Surface
- Product Usage Type
- Topcoat
- Fastest Delivery
- Next Working Day
- Colour Family
- Clear
Questions
Question about the product
Lara Harwood
on
2022-07-10 15:24:33
| Question:
HI, Mathys Pegagraff I'm painting mural in a hospital corridor I read in one of your responses to another customer, that you recommend doing a test area . Do you sell tester size pots for this ? the surface area is roughly 75 meters . how much would I need - the calculator suggest 14 lite - but I may have my sums wrong and this seems rather a lot . look forward to hearing from you , thanks Lara |
Answer from Rawlins’ Technical Team:
Unfortunately the manufacturer does not produce tester pots or samples, the smallest tin size is 5ltr. Based on a coverage rate of 5m² per ltr you would need approximately 15ltrs. | |
|
andy
on
2021-05-03 12:04:30
| Question:
Hi can you recommend a matt graffiti varnish to apply by brush over acrylic masonry paint on a brick wall in good condition? If not, what satin version is best? Thanks |
Answer from Rawlins’ Technical Team:
Hydron Nu-Guard AG is available in a Semi-Matt finish and can be applied over an existing masonry paint. | |
|
Imran Asghar
on
2021-01-17 09:25:50
| Question:
Can Mathys Pegagraff Hydro be used on a painted metal garage roller door. If not I would be grateful if you can recommend a suitable product. Many thanks Imran |
Answer from Rawlins’ Technical Team:
Assuming the previously painted roller shutter is clean, dry, sound, prepared as detailed in the Technical Data Sheet and a test on a small area for compatibility/adhesion is undertaken prior to full application Mathys Pegagraff Hydro can be used for this application. Please be aware this will wear on the joints on the roller shutter. | |
|
Joep Eggermont
on
2018-10-01 21:01:53
| Question:
we have just renewed our garden fence with pressure treated boards (rough sawn appearance) approximately 40mtr long and 2.1mtr high Can you recommend an anti-graffiti paint |
Answer from Rawlins’ Technical Team:
Mathys Pegagraff Hydro is not suitable for bare exterior timber, we would instead recommend Hydron Nu-Guard AG. Apply 2 - 3 coats directly to the wood as required. | |
|
Dean Mander
on
2018-09-28 18:26:35
| Question:
Hi. Just built a brick wall and fence for a customer which is the boundary wall between his property and an alleyway. Is this product suitable to use for the fence and wall or can you recommend anything else in your range? |
Answer from Rawlins’ Technical Team:
Mathys Pegagraff Hydro would not be suitable for either of these surfaces, we would instead recommend Hydron Nu-Guard AG which would be suitable for both. | |
|
Nick
on
2017-08-04 07:21:13
| Question:
Good Morning , I emailed you yesterday but unfortunately have not heard anything back as yet. I am looking to use Mathys Pegagraff Hydro on artwork painted onto marine ply panels, which will be left outside all year round. Can you please let me know if the product is water proof, as I need the artwork to be both graffiti proof and weather proof.
Kind regards
Nick. |
Answer from Rawlins’ Technical Team:
Mathys Pegagraff Hydro is suitable for exterior use so is by default waterpoof and should be perfectly suited to this application as long as all of the timber has been previously coated and Mathys Pegagraff Hydro will not be applied to any areas of bare timber or elastomeric coatings. When applying a graffiti coating over a mural we always recommend a test area is carried out prior to full application to ensure compatibility and aesthetic appearance. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Mathys Pegagraff Hydro is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
