- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Britannia Aquashield Primer is a solvent based primer for very porous and loose/friable surfaces. It ensures the Aquashield topcoat delivers optimum waterproofing performance.
- Works instantly
- Vital stabilisation of highly friable/porous surfaces
- Rainfall immediately after application has no adverse effect
- Can be brush, roller or spray applied
Britannia Aquashield Primer is a solvent based primer for use on highly friable /porous surfaces which require stabilising prior to the application of Aquashield topcoat.
It is easy to use and ensures the Aquashield topcoat delivers optimum waterproofing performance. Ideal for use on highly friable /porous surfaces e.g. Concrete, Asbestos Cladding, Sheeting and Guttering.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Spreading Rate
- Drying Times
- Preparation
- Application
- Cleaning
- Shelf Life & Storage
- Precautions
Features & Benefits
- For use on highly friable/porous surfaces
- Solvent based
- Rainfall immediately after application has no adverse effect
- Can be brush, roller or spray applied
- Works instantly
- Can be over coated when touch dry
Spreading Rate
These will vary depending on substrate, the site conditions and longevity required.
Typically spreading rates will vary depending on the end use.
- Stir well before use
- Do not thin
- 0.2 - 0.33 lt/m2 (equivalent to 3-5 m2 /lt) dependent on type/porosity of substrate
- Should be applied at 5°C-25°C
Drying Times
Note: Low temperature and humidity will adversely affect application, drying and performance of any coating.
Preparation
Clear all areas of moss, lichen and debris by brushing or power washing and remove surface water and any contamination such as Oil or Grease and allow to dry. Apply Britannia Fungicidal Wash to prevent further fungal/algal growth.
Highly porous/friable surfaces:
- These Surfaces must be jet washed prior to applying the Britannia Aquashield Primer
Previously painted or coated substrates:
- It is good practice to inspect and carry out adhesion tests on any existing coating or substrate pior to application of the coating
Splits, cracks, joints and seals:
- Pay particular attention to clean out any splits/cracks/joints and seals by scraping or brushing off with a stiff bristle brush before applying the Britannia Aquashield Primer
Application
- Please follow the Coverage rates shown in Spreading Rate Section.
- Apply between 5°C - 25°C.
- As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during the application and drying.
Cleaning
- For all cleaning use White Spirit
Shelf Life & Storage
- Up to 2 years if stored correctly in an unopened container
- Store in a safe place in accordance with the instructions in section 7 of the relevant MSDS sheet.
Precautions
- Flammable keep away from sources of ignition.
- Ensure good ventilation during application.
- Wear gloves, goggles and suitable protective clothing.
- Over occupied premises during insulation of coatings we would advise keeping windows closed.
- In case of contact with eyes rinse immediately with plenty of water and seek medical advice.
- Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water.
- Keep out of reach of children.
- Do not use near fishponds.
- Harmful to aquatic organisms. May cause long term adverse effects in the aquatic environments.
- Do not empty into drains.
Data sheet
- Application
- Brush, Roller, Spray
- Coverage
- 0.2-0.33 lt/m2 (equivalent to 3-5 m2/lt) dependent on type/porosity of substrate.
- Touch Dry
- Britannia Aquashield Primer can take up to 1 day to cure but can be over coated when touch dry.Only apply Britannia Aquashield Waterproof Roof Coatings when the Primer is sufficiently dry to accept foot traffic.
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Primer
- Product Range
- Aquashield
- Colour Family
- White
Questions
Question about the product
Peter on 2021-05-02 15:49:41 | Question:
Hi is it possible to colour the white to a cream if so what can I use or do you make it in cream thank you Peter |
Answer from Rawlins’ Technical Team:
I'm afraid not, this is only available in white. As it is a primer it needs to be overcoated so wouldn't be seen. | |
Hardy on 2018-12-03 11:55:22 | Question:
How much material primer and sealant will I need for a aspestos garage roof that measures six meters x two and a half meters and what would be the cost Thanks |
Answer from Rawlins’ Technical Team:
When applying the Aquashield coatings to fibre cement/asbestos corrugated sheet we always recommend 'double priming' with Britannia Aquashield Primer. In this instance a popular finishing coat would be Britannia Aquashield High Build. To apply 2 coats of Britannia Aquashield Primer followed by 1 coat of Britannia Aquashield High Build to 15m² you should require; 2 x 5lt Britannia Aquashield Primer | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Britannia Aquashield Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Britannia Aquashield Standard
A ready to use, instantly waterproofing solvent-based coat for exterior pitched or flat roofs, bitumen, metal o fibreglass roofs, asbestos cladding and more. Contains added fibres that interlace to cover up small gaps or cracks in the substrate. Rainfall immediately after application has no adverse effect Can be applied by brush or...
Britannia Fungicidal Wash Solution
A water-based solution which controls and treats fungal and algal growth prior to painting external hard services. For external hard surfaces such as tiled roofs, walls, timber decking, block paving and cladding. Water based - Easy, quick and safe to use. Powerful, proven water based solution for external hard surfaces. Specially...