Follow us on:

Britannia One Pack Etch Primer
Britannia One Pack Etch Primer

Britannia One Pack Etch Primer

METALETCH
BRI3101

Britannia One Pack Etch Primer is a solvent-based primer which enhances adhesion properties to difficult surfaces.

  • For use on aluminium, copper and galvanised steel surfaces
  • External use
  • Up to 12 months shelf life
  • Can be brush, roller or spray applied
  • Solvent based
  • Coverage 10–13m2/lt
Colour
Size
£37.49(incl. VAT)
£31.24(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

questions 1 question about the product
Description

Britannia One Pack Etch Primer is a one pack solvent-based primer for use on aluminium, copper and galvanised steel surfaces.

Britannia One Pack Etch Primer is specially-formulated to enhance adhesion properties on difficult substrates.

For external use.



Quick Links - Click To Jump To Section:




Features & Benefits


  • Solvent-based
  • One-pack
  • For use on aluminium, copper and galvanised steel surfaces
  • Specially-formulated to enhance adhesion properties on difficult substrates
  • For external use
  • Can be brush, roller or spray applied
  • Up to 12 months shelf life
  • Coverage 10–13m2/lt



Spreading Rate


These will vary depending on substrate, the site conditions and longevity required.

Typically spreading rates will vary depending on the end use.

  • 10-13m²/litre @ 15 microns dft minimum
  • Should be applied at 5°C and above



Drying Times


Drying Times @ 20 °C
Touch Dry 20mins
Through Dry 4 hours
Overcoating Times @ 20 °C
Minimum 1 hour
Maximum 16 hours



Note: If primer is not overcoated within 14 days then abrade with either P240 or P320 and clean with a spirit wipe.

  • Curing of the coating can be extended at lower temperatures



Preparation


  • Ensure all areas are clean, dry and free from dust, dirt, corrosion and general surface contamination
  • All oils, grease, etc should be removed with a suitable degreasing solution
  • Degreasing with a spirit wipe is recommended and should be carried out after any abrasion of the surface
  • Thorough mechanical preparation (e.g. power wire brushing, needle gunning, grinding etc) can be utilised for mild environments

Aluminium, Copper and Galvanised Steel:

  • Degrease and abrade with P240 to remove the surface oxide layer



Application


  • Do not thin
  • Stir well before use
  • Please follow the coverage rates shown in Spreading Rate Section
  • Apply by brush, roller (solvent resistant) or spray



Cleaning


  • Remove as much as possible from application equipment before cleaning
  • For cleaning equipment use No 1 Solvent



Shelf Life & Storage


  • Up to one year in an unopened original container at moderate temperatures
  • Store in a safe place in accordance with the instructions in section 7 of the relevant MSDS sheet



Precautions


  • Flammable keep away from sources of ignition
  • Ensure good ventilation during application
  • Wear gloves, goggles and suitable protective clothing
  • In case of contact with eyes rinse immediately with plenty of water and seek medical advice
  • Remove splashes from the skin with a recognised hand cleaner or plenty of soap and water
  • Keep out of reach of children
  • Do not use near fishponds
  • Harmful to aquatic organisms
  • Do not empty into drains



Product Details
3101-376366

Data sheet

Manufacturer
Britannia
Water / Solvent Based
Solvent
Application Method
Brush, Roller, Spray
Colour
Standard / Ready Mixed
Single, Two or Three Pack
Single
Pack Size
1L, 5L
Coverage
10-13 square metres per litre @15 microns dft minimum.
UN Number
UN1263
Base Type
Solvent-Based
Application Method
Roller
Application Method
Spray
Application Method
Brush
Product Usage Type
Primer
Colour Family
White
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)
questions Paul on 2022-05-31 13:50:38
Question: 

Please could you advise me if this etch primer can be overpainted with Teamac chassis black, without one paint reacting to the other. Thank you, Paul.

Answer from Rawlins’ Technical Team:

Teamac Chassis Black is designed to be used as a primer and finish coat.

If you choose to use the Britannia One Pack Etch Primer first we would recommend testing for compatibility and adhesion prior to full application.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Britannia One Pack Etch Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like
Hand & Power Tool Surface Preparation Kits for Steel

Surface Preparation Kits for Steel

These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...

Price £25.93 (incl. VAT)
Shop now
Trustpilot
In Stock and Available for Delivery