Bradite HD Floor + Wall

This high-performance two-pack epoxy coating provides a smooth, durable finish for interior floors and walls. It offers excellent resistance to chemicals, abrasion, and water, making it suitable for a wide variety of environments. The product can be tinted to various colours, ensuring aesthetic appeal while maintaining functionality. Its water-based formula ensures low environmental impact, with minimal VOC emissions.

Application and Surfaces

This product is perfect for use on concrete, wood, steel, and other dry absorbent substrates. Before applying, ensure surfaces are free from dust, grease, and any loose materials. When applying on bare concrete or wood, thin the first coat to promote substrate penetration. Its compatibility with different surfaces makes it an ideal choice for high-traffic areas requiring a long-lasting finish.

• Concrete floors
• Steel substrates
• Interior wood
• Other absorbent surfaces

Key Benefits

The epoxy coating offers exceptional chemical resistance, ensuring long-lasting performance even in demanding environments. The product can be applied via brush, roller, or spray, providing flexibility in the method of application. The ability to add a slip-resistant additive increases its safety for environments prone to wet conditions.

Limitations and Restrictions

This coating should not be used on exterior surfaces, as it is prone to chalking and colour fade when exposed to sunlight. It is also unsuitable for use over asphalt, bitumen, epoxy tar, alkyd, chlorinated rubber, or vinyl-based paints. Always ensure surfaces are clean and dry before applying. Additionally, proper ventilation is required during application.

Health and Safety

Always refer to the product's safety data sheet for full guidance. This product contains substances that may cause skin irritation and allergic reactions, and it is harmful to aquatic life. Avoid skin and eye contact, and ensure proper personal protective equipment is worn.