- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Keim IF Primer (I.G. Primer) is a nitro-collodium, colourless primer with good water vapour permeability used to obliterate staining.
- High water vapour permeability.
- Resistance to yellowing.
- Water repellent.
- Consolidating.
- Highly water vapour permeable: two-coat application: sd = 0.04m.
- Density: 0.9g/cm3.
Note: The name of this product will change in early 2023 - also known as Keim I.G. Primer/Keim I & F Grund
Keim IF Primer (I.G. Primer) is a nitro-collodium, colourless primer with good water vapour permeability used to obliterate staining. Used as a primer particularly for substrates that are contaminated with soot, nicotine and tar and to consolidate substrates.
Top Features & Benefits
- High water vapour permeability.
- Resistance to yellowing.
- Water repellent.
- Consolidating.
- Highly water vapour permeable: two-coat application: sd = 0.04m.
- Density: 0.9g/cm3.
Preparation & Application
Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, application of Keim IF Primer may proceed.
Application
It is usually sufficient to apply only one coat of Keim IF Primer. For extremely strong contamination a second coat is recommended with 4 hours between coats. Keim IF Primer is supplied ready to use and should be applied undiluted by brush or roller.
Keim IF Primer can be used between coats of Keim Mineral Paint systems. After a waiting time of approx. 5 hours Keim IF Primer be over coated with any of the Keim Mineral Paint systems.
Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.
Consumption
Approx. 0.1lt/m² per coat. Consumption rates are offered for guideline purposes only and are quoted for smooth rendered surfaces. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.
Cleaning of Tools
Clean tools with cellulose thinner (or similar) immediately after use.
Data sheet
- For Use By
- Consumer Use
- Min. Application Temperature
- 5°C
- Colour(s)
- Clear
- Base Type
- Solvent-Based
- Finish
- Semi-Gloss
- Product Usage Type
- Primer
- Colour Family
- Clear
- Categorised As
- Masonry Cleaners
- Categorised As
- Masonry Primers
Questions
Question about the product
Irene Fair on 2022-11-10 08:29:43 | Question:
Could you send me the product safety sheet and safety data sheet for the following : Keim I & F Grund (I.G. Primer) - preferably in French but English or German are also acceptable. Thanks |
Answer from Rawlins’ Technical Team:
Thank you for the enquiry, all data sheets can be found on the product page in the data sheets tab. We have emailed the requested data sheets to you. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Keim IF Primer (I.G. Primer) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT