- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A high performance epoxy and a polyurethane in one coat. General purpose high gloss coating offering good weathering and wear resistance.
- Very low odour
- Gloss in appearance
- Finish: Gloss
Delivery available on request - please contact our sales team on 0113 2455450 or send a message to [email protected] for availability
An engineered siloxane coating that embodies the properties of both a high performance epoxy and a polyurethane in one coat. General purpose high gloss coating offering good weathering and wear resistance. Provides a wipeable, durable surface that has good anti-graffiti properties for all mineral substrates.
Top Features & Benefits
- Very low odour.
- Gloss in appearance.
- Finish: Gloss.
- VOC: 8% by weight / 120g/l.
- Specific gravity: 1.36kg/l (mixed product).
- Pot life: 4 hours (200C).
- Drying times: at 125 µm dft and 200C in hours.
- 300C 200C 100C 50C.
- Dry to touch 1 2 4½ 7.
- Dry through 3 4½ 8½ 16.
- Mixing ratio (by volume): 4 parts resin: 1 part cure.
Product Use in the Workplace
Substrate Preparation
All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, decoration using KEIM MX Glaze may proceed.
Application
KEIM MX Glaze is supplied in the proper mixing proportions of resin and cure. Add cure to resin and stir thoroughly with mechanical mixer for five minutes, avoid entrapment of air in the coating which will result in bubbles and blisters. Apply a thin and even coat by brush or short pile roller.
Application Conditions
Ambient and substrate temperature above 5°C and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, nor if it is raining or if there is an immediate likelihood of rain.
Consumption
Approx. 0.1lt/m² per coat. Consumption rates are offered for guideline purposes only and are quoted for smooth surfaces. Actual rates are the responsibility of the applicator. Project specifications should be referred to for specific rates.
Cleaning of Tools
Clean tools with solvent immediately after use.
Data sheet
- Manufacturer
- Keim
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Mineral Substrates
- Application Method
- Brush, Roller
- Sheen
- Gloss
- Colour
- Clear
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 4.5L
- Interior/Exterior Use
- Interior & Exterior Use
- UN Number
- UN3066
- Base Type
- Solvent-Based
- Suitable For Use On
- Mineral Substrates
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Components
- 2K
- Permanent / Semi-Permanent
- Permanent
- Usages
- Anti-Graffiti
- Product Usage Type
- Topcoat
- Colour Family
- Clear
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Keim MX Glaze Clear is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT