- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Eagle Black Bituminous Paint applies to a wide variety of surfaces including steel, iron, lead, zinc, aluminium, concrete, stone and brick, providing protection from water and resisting weather and corrosion.
- Suitable for use on exterior metalwork such as fire escapes, gutters and ladders, structures made from concrete, stone and brick, and for protecting drinking water tanks (see more information below)
- Coverage: For metals and smooth surfaces 10m² per litre should be attained, on porous surfaces coverage will be considerably less
Eagle Black Bituminous Paint protects steelwork, asphalt and wood, concrete and potable water tanks with an odourless and taint-free bitumen film that is waterproof and resistant to weather and corrosion.
Resistant to low concentrations of alkalis and acids, withstanding prolonged oxidation, Eagle Black Bituminous Paint is suitable for application to a wide variety of surfaces including steel, iron, lead, zinc, aluminium, concrete, stone and brick, and is used mainly for:
- Metal protection for any type of exterior metalwork - fire escapes, ladders, gutters etc.
- Protecting drinking water tanks (see further below for more information).
- A protective coating for concrete structures, stone, brick, concrete screeds and sand/cement surfaces.
Eagle Black Bituminous Paint dries to a shiny black coating, dulling with exposure to sunlight.
Application
Use a brush or sprayer, applying evenly and ensuring no pooling of solution. A minimum of two coats is recommended, allowing the first coat to dry before overcoating.
All surfaces must be free from oil, dirt, dust and loose debris, using a wire brush on metal surfaces to remove loose rust, and using a rust inhibitor where signs of advanced corrosion are spotted.
On treating porous surfaces, an initial coat of Bituminous Primer should be applied.
Drinking Water Tanks
Surfaces should be dry and clear of mill scale, rust and dirt. All surfaces should be degreased immediately prior to application.
Brush application is preferred to ensure a thorough coating of all recesses, edges, rivets and bolts.
Apply two coats, allowing at least a 24 hour drying period between coats (Drying may be assisted by the provision of a forced air draught). It is important that the first coat is completely dry before application of the second coat.
Use clean, uncontaminated application equipment.
After the second coat has dried and before the tank is put into service it should be filled with cold drinking water and drained after not less than 4 hours. If a taste is detected in this water, the process should be repeated.
Coverage
Coverage per litre is dependent upon the porosity of the surface.
For metals and smooth surfaces 10m² per litre should be attained. On porous surfaces coverage will be considerably less.
Data sheet
- Manufacturer
- Eagle
- For Use By
- Consumer Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- For Use On
- Steel, Iron, Lead, Zinc, Aluminium, Concrete, Stone, Brickwork
- Application Method
- Brush, Spray
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 25L
- Coverage
- Coverage per litre is dependent upon the porosity of the surface. For metals and smooth surfaces 10m² per litre should be attained.
- UN Number
- UN1263
- Colour(s)
- Standard Colours
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Asphalt
- Suitable For Use On
- Concrete
- Suitable For Use On
- Wood
- Finish
- Semi-Gloss
- Application Method
- Brush
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Colour Family
- Black
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Eagle Black Bituminous Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Eagle Quick Drying Bitumen Primer
We no longer stock this product, but can recommend Eagle Bitumen Primer as a great alternative.
Eagle Bitumen Primer
Eagle Bitumen Primer provides a key on substrates prior to application of bituminous roof paints and surface coatings, applying by brush or sprayer, and requires no thinning. Ready for use Suitable for use with all bituminous surface coatings Used for priming concrete roofs and floors, cementicious screeds and renders, bitumen felt,...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...