Eagle DoubleCoat Pro-Reflect Liquid Waterproofing provides waterproofing and solar reflection on most types of roof surfaces including galvanised steel, iron zinc, asbestos, cement, roofing felt, asphalt and bituminous roof coatings. Elastomeric and self-reinforced with microfibers and high aluminium content, Eagle DoubleCoat needs just one coat and can be installed quickly on its own or in combination with a carrier membrane which achieve up to 25 years guarantee, due to its tough polyester reinforcement and UV protection.

Eagle DoubleCoat also provides anticorrosion to exposed metal structures such as storage tanks, pipes and cladding, and is therefore highly recommended for industrial units and warehouses.

Features & Benefits

• Corrosion protection and waterproofing on metal pipes and tanks - ideal for industrial units, warehouses & workshops
• Waterproofing and solar reflection on most types of roof surfaces, including:
  • Galvanised steel
  • Iron zinc
  • Asbestos
  • Cement
  • Roofing felt
  • Asphalt
  • Bituminous roof coatings
• Resistant to chemical attacks. DoubleCoat Pro-Reflect has been used in high aggressive environments such as chemical and dairy factories proving a high resistance to acid rain and chemical attacks.
• Energy Saving. DoubleCoat Pro-Reflect has a high reflection capacity to provide owners and building developers an energy saving around 30% on electricity bill.
• Self-reinforced. Double Coat Pro-Reflect contains micro-fibres that act as a carrier and reduces the application time due to the necessity to apply many coats with a reinforcement embedded.
• Permanently Elastomeric. Cold Applied and one layer application. Bridges small holes, cracks and splits.
• On new developments, DoubleCoat Pro-Reflect can be installed on its own or in combination with a carrier membrane which achieve up to 25 years guarantee, due to its tough polyester reinforcement and UV protection. The system can be installed in one day providing a fast solution for the contractor and a long-lasting waterproofing system for the building owner.
• Any damage caused to the roof can be easily repaired with DoubleCoat Pro-Reflect.
• Wide Range of guarantees available from 10 to 25 years. Exceeds ASTM D2824
• Single Pack Product.

Application

All surfaces must be clean, dry and free from dust and loose debris. Freshly applied coatings should be allowed to weather for 2 weeks prior to the application of Double Coat. All traces of fungi and algae growth should be removed using a stiff bristled brush or low pressure water jet. Where algae and fungi have been removed, the surface should be treated with a fungicidal wash.

Stir the container thoroughly before use to ensure that no deposits are left at the bottom of the container. Double Coat may be applied by brush or sprayed. Do not apply in wet weather or when rain is threatened, or when poor drying conditions exists. As a protective measure on most well prepared surfaces which are in sound conditions, one layer of Double Coat is normally adequate.

Asbestos, cement and porous surfaces should be first primed with Eagle Bitumen Primer.

Coverage

The rate of application is between 1 -2 square meters per litre per coat, depending on the conditions of the surface. Do not coat windows, roof lights, glass or translucent sheets as they will constitute a hidden hazard.

Drying Time

Drying time is around 1-2 hours, in most of weather conditions.