- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
A two-component, high performance, exceptionally tough protection coat which can be used to provide wear and abrasion resistance, and to create anti slip surfaces when used in conjunction with a quartz aggregate.
- High adhesion
- High elasticity
- High resistance to abrasion, atmospheric pollutants, and UV radiation
- Applied by brush, roller, or airless spray
- Two part System: Mono Top 10kg kit – 7.2kg + 2.8kg pigment
- Please Note: This product is also available in Dark Grey and White subject to a 4 week lead time - Please contact us on 0113 2455450 (option 1) or send a message to [email protected] for more information
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Professional use only - from the 24th August 2023, adequate training is required before industrial or professional use of this product.
Should you require training, visit - https://www.safeusediisocyanates.eu/
Bullet Roof Mono Top is a two-component, exceptionally tough protection coat which can be used to provide wear and abrasion resistance, and to create anti slip surfaces when used in conjunction with a quartz aggregate. Mono Top can withstand heavy pedestrian foot traffic and vehicle traffic. Being fully aliphatic, it also has very high UV resistance, and can also be used to further extend the service life of the Bullet Roof Mono system in excess of 35+ years in normal use.
This enables the Bullet Roof Mono system to be used in applications of extreme wear and abrasion such as balconies and car parks. Mono top can be sprayed using airless spray to refurbish existing roof sheets (plastisol coated steel, asbestos etc) when used in conjunction with the correct primer (contact our Rawlins Paints' Technical Team on Tech - 0113 2455450 (option 2) or [email protected]) to provide unparalleled levels of protection from the elements, extending the existing structures serviceable life for additional decades.
Bullet Roof Mono Top is supplied as a two part system: Mono Top 10kg kit – 7.2kg + 2.8kg pigment.
Note: Dark Grey and White colours in this product are subject to a lead time - Light Grey is readily available ex. stock.
Application Uses
- Balcony finishes
- Car park surfaces
- Footpath and muster point demarcation
- Sheet roof refurbishment by airless spray
Click To Jump To Section:
Features and Benefits
- High adhesion
- High elasticity
- High resistance to abrasion, atmospheric pollutants and UV radiation
- Applied by brush, roller, or airless spray
Product Specification
Technical Data | |
---|---|
Bullet Roof Mono Top | |
Specific weight: | 1,31±0,07 kg/l |
Viscosity at 20°C UNI EN ISO 2555: | 2500 ± 500 mPa.s |
Solid content EN ISO 3251: | 65% in volume |
Theoretical consumption: |
150-400 g/m² per coat It depends on the colour |
Shelf Life: | When kept in the original sealed packs in a dry protected place at temperatures from + 5°C to + 35°C, the product will keep for 12 months |
Application Methods
- When using Mono Top to extend the service life of the Bullet Roof Mono system in normal/low traffic areas it can be applied at a rate of 0.150-0.400 kg m² in a single coat
- When using Monotop as a protection coat in high traffic areas, two coats must be applied
- When Mono top is being applied onto a new Bullet Roof Mono system it must be applied with 72 hours of the Bullet Roof Mono application
- If this window is exceeded apply Bullet Roof Quick Prime (cures in times from 10 minutes) to achieve the optimum bond required
- Contact Rawlins on Tech - 0113 2455450 (option 2) or [email protected] for technical advice
Health and Safety
Clean Up
- Clean the tools thoroughly with DILUENTE 6 after use
- Refer to the product data sheet in the attachments section above for further details
Data sheet
- Manufacturer
- Bullet Building Products
- Interior / Exterior Use
- Exterior Use
- For Use On
- Plastisol, Coated Steel, Asbestos
- Application Method
- Brush, Roller, Airless Spray
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 14kg
- Coverage
- 150-400 g/m² dependent on colour
- Solids by Volume
- 65%
- Shelf Life (from date of manufacture)
- When kept in the original sealed packs in a dry protected place at temperatures from + 5°C to + 35°C, the product will keep for 12 months.
- Size
- Supplied as 14kg kits Mono Top 10kg + Pigment 4kg
- Solids by Weight
- 1,31±0,07 kg/l
- Suitable For Use On
- Asbestos
- Suitable For Use On
- Plastisol
- Suitable For Use On
- Coated Steel
- Application Method
- Spray
- Application Method
- Brush
- Application Method
- Roller
- Components
- 2K
- Usages
- UV Resistant
- Product Usage Type
- Topcoat
- Colour Family
- Grey
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bullet Roof Mono Top is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Bullet Roof Mono
BBA Approved and formulated to the highest specification, this flat roof paint can be applied over almost any surface with or without full reinforcement dependent on performance/specification requirements and can achieve life expectancies of up to 25 years. Moisture cured allowing application in most weather conditions Excellent adhesion...
Bullet Roof Quick Prime
Developed to meet the demand for a quicker yet still penetrating single pack primer. Bullet Roof Quick Prime is ready to be overcoated in as little as 20 minutes. Suitable for most roof substrates including, concrete, wood and bituminous membranes. Colour: Amber Solids: 46% by weight, 40% by volume Theoretical consumption: 150 g/m² ASTM...