Follow us on:

PPG SigmaDur ONE | Marine Topcoat available in 350+ colours
PPG SigmaDur ONE | Marine Topcoat available in 350+ colours

PPG SigmaDur ONE

7533
PPG4157

Single-pack urethane polyester finish coat in 2,600+ colours for onboard maintenance on topsides, decks and superstructures.

  • Quick drying.
  • Pre-reacted binder, no free isocyanates added.
  • Easy application with excellent flow and levelling properties.
  • Recommended application is by brush and roller only.
  • Good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy coatings.
  • Good colour and gloss retention.

Product customisation

Don't forget to save your customization to be able to add to cart
  • 250 char. max
Colour Group
Size
Finish
£68.86(incl. VAT)
£57.38(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

PPG SigmaDur ONE, a one-pack urethane polyester finish coat for onboard maintenance with easy application and excellent flow and levelling properties. The finish applies on topsides, decks and superstructures by brush or roller, drying quickly, with good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy coatings.

Features & Benefits


  • Available in 350+ colours from RAL and BS
  • Easy to apply on topsides, decks and superstructures
  • Pre-reacted binder, no free isocyanates added
  • Easy application
  • Excellent flow and levelling properties
  • Recommended application is by brush and roller only
  • Quick drying
  • Good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy coatings
  • High gloss
  • Good colour and gloss retention
  • Used at Wagenborg Shipping, Delfzijl, The Netherlands, a company with more than 100 years’ experience in Northwest Europe with a fleet of around 180 vessels has an average age of only 6.7 years with a capacity of 2,000–23,000 tonnes.
  • Used by Stena Line, one of the world’s largest ferry companies with a modern fleet of 39 vessels and Europe’s most comprehensive route network, consisting of 23 ferry routes in Scandinavia and around the UK.

Product Data


One-pack urethane polyester finish coat.

Data for mixed product at 20°C (68°F)
Number of components One
Mass density 1.1 kg/l (9.2 lb/US gal)
Volume solids 53 ± 3%
VOC (Supplied) Directive 1999/13/EC, SED: max. 383.0 g/kg
max. 400.0 g/l (approx. 3.3 lb/US gal)
EPA Method 24: 2.6 lb/US gal (311.5 g/l))
Recommended dry film thickness 35 - 70 µm (1.4 - 2.8 mils) depending on system
Theoretical spreading rate 14.3 m²/l for 35 µm (573 ft²/US gal for 1.4 mils)
Overcoating Interval Minimum: 8 hours
Maximum: Unlimited
Dry to touch 1 hour
Full cure after 4 days
Shelf life At least 24 months when stored cool and dry

Notes:

  • See below for more information on surface preparation, application details and curing times

Surface Preparation


Recommended Substrate Conditions and Temperatures

Substrate conditions

  • Previous coat (alkyd, epoxy or polyurethane) must be dry and free from any contamination
  • Previous coat: surface should be sufficiently roughened if necessary

 

Substrate Temperature & Application Conditions


  • Substrate temperature during application should not exceed 50°C (122°F)
  • Substrate temperature during application should be at least 3°C (5°F) above dew point

Application


Instructions for Use

  • Stir well before use
  • The temperature of the paint should preferably be above 15°C (59°F)
  • Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and 1434)

 

Brush/roller


Recommended thinner

Overcoating interval for DFT up to 70 µm (2.8 mils)


Overcoating with... Interval 5°C (41°F) 10°C (50°F) 20°C (68°F) 30°C (86°F) 40°C (104°F)
Itself Minimum 20 hours 14 hours 8 hours 6 hours 5 hours
Maximum Unlimited Unlimited Unlimited Unlimited Unlimited

Note: Surface should be dry and free from any contamination

Safety Precautions


  • For paint and recommended thinners, see information sheets information sheet 1430, information sheet 1431 and the relevant Material Safety Data Sheets in the attachments section above
  • This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapor, as well as contact between the wet paint and exposed skin or eyes

References


Product Details
4157-890447

Data sheet

Manufacturer
PPG
Water / Solvent Based
Solvent
For Use On
Metal
Application Method
Brush, Roller
Sheen
Gloss
Colour
Fully Tintable
Single, Two or Three Pack
Single
Pack Size
20L
Parts
One
Base Type
Solvent
Solvent
Urethane polyester
Mixing Ratio
-
Suitable Substrates
Metal
Key Features
Easy application with excellent flow and levelling, quick drying and available in more than 350 colours
Application
Brush, Roller
Touch Dry (at 20°C)
1 hour
Dry to Handle (at 20°C)
-
Dry to Recoat (at 20°C)
8 hours
Fully Cured (at 20°C)
4 days
Pot Life (at 20°C)
-
Coverage
14.3 m²/l for 35 µm (573 ft²/US gal for 1.4 mils)
Recommended Thinner/Cleaner
THINNER 21-06
Unit Contents
-
Compatible Primers
-
Compatible Topcoats
-
Max. Application Temperature
50°C (122°F)
Min. Application Temperature
3°C (5°F) above dew point
Density
1.1 kg/l (9.2 lb/US gal)
Solids by Volume
53 ± 3%
Heat Resistance (up-to)
-
VOC
Directive 1999/13/EC, SED: max. 383.0 g/kg max. 400.0 g/l (approx. 3.3 lb/US gal) EPA Method 24: 2.6 lb/US gal (311.5 g/l))
Shelf Life (from date of manufacture)
24 months
UN Number
UN1263
Base Type
Solvent-Based
Suitable For Use On
Metal
Finish
Gloss
Application Method
Brush
Application Method
Roller
Product Usage Type
Topcoat
Product Range
SigmaDur
Colour Family
Anthracite Grey
Colour Family
Cream
Colour Family
Grey
Colour Family
Green
Colour Family
Blue
Colour Family
Red
Colour Family
Brown
Colour Family
Pink
Colour Family
Orange
Colour Family
Purple
Colour Family
Yellow
Colour Family
Black
Colour Family
White
Colour Family
Neutral
Attachments
Download


Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

* Required fields
(read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

PPG SigmaDur ONE is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT


You might also like