PPG SigmaGlide 890

Reference 7399

Search ID PPG4173

2-component, silicone-based finish for fouling release systems on ships, installations and seawater intakes under all fouling conditions, for new-building or maintenance.

Non-toxic.
Can be used at temperatures above 5°C (41°F).
No induction time.
Can be applied by spray.
Can be overcoated after 2 hours.

For Reference:

See our guide to applying anti-fouling paints in-line with the "Protect Collect & Dispose Initiative".

Colour

Red Brown

Size

Finish

£1421.28(incl. VAT)

£1184.40(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

The minimum purchase order quantity for the product is 22.

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

No queries yet, leave the first!

Description

PPG SigmaGlide 890, a two-component, silicone-based finish for fouling release systems on ships, installations and seawater intakes under all fouling conditions. The non-toxic coating can be used at new-building or maintenance, applying by spray.

Please note: This product is subject to a minimum order quantity of 440L and has an approximate delivery lead time of 21-28 days.

Features & Benefits

Non-toxic, fouling release coating for ships, installations and seawater intakes under all fouling conditions
For use at new-building or maintenance
Can be used at temperatures above 5°C (41°F)
No induction time
Can be applied by spray
Can be overcoated after 2 hours
See below for more information on surface preparation, application details and curing times

Reference	Colour	Size	Gloss Level
236471	Red Brown	20 litres	Gloss

Product Data

Two-component, silicone-based finish for fouling release system

Data for mixed product at 20°C (68°F)
Number of components	Two
Mass density	1.1 kg/l (9.2 lb/US gal)
Volume solids	77 ± 2%
VOC (Supplied)	Directive 1999/13/EC, SED: max. 196.0 g/kg
VOC (Supplied)	max. 215.0 g/l (approx. 1.8 lb/US gal)
Recommended dry film thickness	150 µm (6.0 mils)
Theoretical spreading rate	5.1 m²/l for 150 µm (206 ft²/US gal for 6.0 mils)
Dry to touch	1 hour
Overcoating Interval	Minimum: 2 hours
Refloating time	Minimum: 8 hours
Shelf life	Base: at least 36 months when stored cool and dry
Shelf life	Hardener: at least 36 months when stored cool and dry
Pot life	4 hours at 20°C (68°F)

Notes:

Refer below for more details on spreading rate and film thickness, overcoating intervals and curing times

Surface Preparation

Recommended Substrate Conditions and Temperatures

Substrate conditions

Steel; blast cleaned to ISO-Sa2½ for excellent corrosion protection
For new-buildings or spot/full blast, SIGMAGLIDE 890 should only be applied over SIGMAGLIDE 790
As a refresh coat, SIGMAGLIDE 890 can be applied over itself in line with PPG Protective & Marine Coatings

SIGMAGLIDE General Working Procedure

Previous coat must be dry and free from any contamination

Substrate Temperature & Application Conditions

Substrate temperature during application and curing should be above 5°C (41°F)
Substrate temperature during application and curing should be at least 3°C (5°F) above dew point
Relative humidity during application and curing should be between 40% and 85%

System Specification

In order to achieve optimal performance from the SIGMAGLIDE system, the individual SIGMAGLIDE products must be applied in strict accordance with the minimum specified dry film thickness and also with the PPG Protective & Marine Coatings SIGMAGLIDE General Working Procedure. Please consult our technical team on 0113 2455450 or [email protected] for details of the application procedure which has been prepared to the best of our knowledge and in accordance with worldwide application best practices in order to ensure optimal workmanship and application results.

Application

Instructions for Use

Mixing ratio by volume: base to hardener 80:20 (4:1)

Open drum just before use
Stir base well before use for 5 minutes
Add hardener to the base and stir well again for at least 5 minutes
No thinner should be added
All equipment must be thoroughly cleaned prior to use and before re-use with other materials, to prevent contamination
Overspray on paint, which will not be recoated with the SIGMAGLIDE 890, should be avoided as much as possible

Induction Time

None.

Airless Spray

Recommended thinner

No thinner should be added

Nozzle angle

35° – 60°, depending on nozzle orifice

Nozzle orifice

Approx. 0.43 – 0.53 mm (0.017 – 0.021 in)

Nozzle pressure

15.0 - 20.0 MPa (approx. 150 - 200 bar; 2176 - 2901 p.s.i.)

Brush/roller

For small areas only (touch up and repair)

Cleaning Solvent

THINNER 90-83 or 50/50 mixture of THINNER 21-06 and THINNER 50-02

Note:

The used cleaning solvent must not be allowed to contaminate other paints

Overcoating interval for DFT up to 150 µm (6.0 mils)

Overcoating with...	Interval	10°C (50°F)	20°C (68°F)	30°C (86°F)	40°C (104°F)
Itself	Minimum	3 hours	2 hours	1 hour	1 hour
Itself	Maximum	8 hours	8 hours	8 hours	8 hours

Notes:

Surface should be dry and free from any contamination
Relative humidity should be above 40%

Pot Life (at application viscosity)

Mixed product temperature	Pot life
10°C (50°F)	6 hours
20°C (68°F)	4 hours
30°C (86°F)	2 hours

Safety Precautions

For paint and recommended thinners, see information sheets information sheet 1430, information sheet 1431 and the relevant Material Safety Data Sheets in the attachments section above
This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapor, as well as contact between the wet paint and exposed skin or eyes

References

Explanation to product data sheets (information sheet 1411)
Safety Indicators (information sheet 1430)
Safety in Confined Space and Health Safety, Explosion Hazard - Toxic Hazard (information sheet 1431)

Product Details

Reference 4173-890836

Data sheet

Manufacturer: PPG
For Use On: Steel
Application Method: Spray
Sheen: Gloss
Colour: Standard / Ready Mixed
Single, Two or Three Pack: Two-Pack
Pack Size: 20L
Parts: Two
Base Type: Solvent-borne
Solvent: Silicone
Mixing Ratio: 4:1
Suitable Substrates: Steel
Key Features: For fouling release systems on ships, installations and seawater intakes under all fouling conditions
Application: Spray
Touch Dry (at 20°C): -
Dry to Handle (at 20°C): -
Dry to Recoat (at 20°C): 2 hours
Fully Cured (at 20°C): -
Pot Life (at 20°C): 4 hours
Coverage: 5.1 m²/l for 150 µm (206 ft²/US gal for 6.0 mils)
Recommended Thinner/Cleaner: THINNER 90-83 or 50/50 mixture of THINNER 21-06 and THINNER 50-02
Unit Contents: Base & hardener
Compatible Primers: SIGMAGLIDE 790
Compatible Topcoats: -
Max. Application Temperature: -
Min. Application Temperature: 5°C (41°F)
Density: 1.1 kg/l (9.2 lb/US gal)
Solids by Volume: 77 ± 2%
Heat Resistance (up-to): -
VOC: Directive 1999/13/EC, SED: max. 196.0 g/kg max. 215.0 g/l
Shelf Life (from date of manufacture): Base & hardener: 36 months
UN Number (Activator): UN1263
UN Number (Base): UN1263
Base Type: Solvent-Borne
Application Method: Spray
Product Usage Type: Antifouling

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet (Base)

Download

Safety Data Sheet (Hardener)

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Be the first to ask a question about this product!

IMPORTANT SHIPPING & DELIVERY INFORMATION

PPG SigmaGlide 890 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT