- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
International Interstores Alkyd Primer, a quick drying one pack primer that is surface tolerant and compatible with most substrates and able to be overcoated with a wide range of finishes. Use for the maintenance of above water areas and at On Board Maintenance only. Part of a dedicated range of On Board Maintenance (OBM) products specifically designed for easy application by ships crews at sea and in por and engineered to meet OBM product performance expectations.
- Suitable for all substrates above the waterline - applied on 3100 vessels since launch
- Can be overcoated with a wide range of finishes - Not recommended for overcoating with epoxy coatings
- Certified for food contact and fire resistance (when used as part of an approved scheme)
- Fast drying - touch dry in 1.5 hours, hard dry in 3.5 hours - See below for more drying and overcoating times
Description
International Interstores Alkyd Primer is a quick drying one pack primer, surface tolerant and compatible with most substrates, able to be overcoated with a wide range of finishes. Use for the maintenance of above water areas and at On Board Maintenance only.
Interstores is a dedicated range of On Board Maintenance (OBM) products, specifically designed for easy application by ships crews at sea and in port. Engineered to meet OBM product performance expectations and designed for brush and roller application.
Certification
When used as part of an approved scheme, this material has the following certification:
- Food Contact - Carriage of Grain (NOHH)
- Fire Resistance - Surface Spread of Flame (Exova Warringtonfire)
- Fire Resistance - Smoke & Toxicity (Exova Warringtonfire)
- Fire Resistance - Marine Equipment Directive compliant
Features & Benefits
- Fast drying one-pack alkyd primer
- Touch Dry [ISO 9117/3:2010] in 1.5 hrs (at 25°C)
- Hard Dry [ISO 9117-1:2009] in 3.5 hrs (at 25°C)
- Surface tolerant
- Suitable for all substrates above the waterline
- Easy application by On Board Maintenance
- Applied on 3100 vessels since launch
- Not recommended for overcoating with epoxy coatings
Systems & Compatibility
| Product Information | |
|---|---|
| Colour | ISA710-White, ISA720-Grey, ISA730-Red |
| Finish/Sheen | Matt |
| Volume Solids | 48% ±2% (ISO 3233:1998) |
| Typical Film Thickness | 75 microns dry (156 microns wet) |
| Theoretical Coverage | 6.4 m²/litre at 75 microns dft, allow appropriate loss factors |
| Method of Application | Airless Spray, Brush, Roller |
| Flash Point (Typical) | Single Pack 41°C |
| VOC | 412 g/lt as supplied (EPA Method 24) |
| 362 g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council Directive 1999/13/EC) | |
| Note: VOC values are typical and are provided for guidance purposes only. These may be subject to variation depending on factors such as differences in colour and normal manufacturing tolerances. | |
| Shelf Life | 12 months minimum at 25°C. Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition. |
Drying Times
| Drying Information | 5°C | 15°C | 25°C | 35°C |
|---|---|---|---|---|
| Touch Dry [ISO 9117/3:2010] | 2.5 hrs | 2 hrs | 1.5 hrs | 60 mins |
| Hard Dry [ISO 9117-1:2009] | 4 hrs | 4 hrs | 3.5 hrs | 3 hrs |
| Overcoating Data - see limitations | Substrate Temperature | |||||||
|---|---|---|---|---|---|---|---|---|
| 5°C | 15°C | 25°C | 35°C | |||||
| Overcoated By | Min | Max | Min | Max | Min | Max | Min | Max |
| Interlac 665 | 6 hrs | 3 days | 6 hrs | 2 days | 60 mins | 2 days | 60 mins | 2 days |
| Intersheen 579 | 6 hrs | 2 days | 6 hrs | 2 days | 2 hrs | 2 days | 2 hrs | 2 days |
| Interstores Alkyd | 6 hrs | 3 days | 6 hrs | 2 days | 2 hrs | 2 days | 2 hrs | 2 days |
| Interstores Alkyd Primer | 3 hrs | 1 mths | 3 hrs | 1 mths | 2 hrs | 1 mths | 2 hrs | 1 mths |
| Interstores Polyurethane | 24 hrs | 7 days | 24 hrs | 7 days | 16 hrs | 7 days | 16 hrs | 7 days |
| Interthane 990 | 24 hrs | 7 days | 24 hrs | 7 days | 16 hrs | 7 days | 16 hrs | 7 days |
Preparation
Use in accordance with the standard Worldwide Marine Specifications. All surfaces to be coated should be clean, dry and free from contamination. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
Repair/OBM
Prepare area to be repaired to a minimum of SSPC-SP2. Higher levels of surface preparation by abrasive blasting to SSPC-SP6 or hydroblasting to HB2M (International Paint Hydroblasting Standards), will enhance product performance.
Feather or chip back surrounding area to a sound edge.
Ensure that the area is clean and dry prior to application of Interstores Alkyd Primer.
Overlap the primer onto existing coatings by approximately 2-3cm.
Consult International/Rawlins Technical for specific recommendations.
Application
| Application | |
|---|---|
| Mixing | This material is a one pack coating and should always be mixed thoroughly with a power agitator before application. |
| Thinner | International GTA004. Thinning is not normally required. Consult the local representative for advice during application in extreme conditions. Do not thin more than allowed by local environmental legislation. |
| Airless Spray | Recommended: |
| Tip Range 0.53-0.66 mm (21-26 thou) | |
| Total output fluid pressure at spray tip not less than 176 kg/cm² (2500 p.s.i.) | |
| Conventional Spray | Application by conventional spray is not recommended. |
| Brush | Application by brush is recommended for small areas only. Multiple coats may be required to achieve specified film thickness. |
| Roller | Application by roller is recommended for small areas only. Multiple coats may be required to achieve specified film thickness. |
| Cleaner | International GTA004 |
| Work Stoppages and Cleanup | Thoroughly flush all equipment with GTA004. All unused material should be stored in tightly closed containers. Partially filled containers may show a viscosity increase of the material after storage. Material should be filtered prior to use. |
| Welding | In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation. |
Safety
All work involving the application and use of this product should be performed in compliance with all relevant national Health, Safety & Environmental standards and regulations.
Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information. Read and follow all precautionary notices on the Material Safety Data Sheet and container labels. If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use this product. Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards. Take precautions to avoid skin and eye contact (ie. gloves, goggles, face masks, barrier creams etc.) Actual safety measures are dependant on application methods and work environment.
Limitations
It is recommended that Interstores Alkyd Primer is not overcoated with epoxy coatings. In certain regions, for specific customer requests and where cosmetic properties are not of concern, Interstores Alkyd Primer may be applied without a cosmetic finish. Consult International or Rawlins Technical for guidelines and details of colours available.
Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. Consult International Paints or Rawlins Technical for specific recommendations. Apply in good weather. Temperature of the surface to be coated must be at least 3°C above the dew point. For optimum application properties bring the material to 21-27°C, unless specifically instructed otherwise, prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage in accordance with information given in the STORAGE Section of the product data sheet. Technical and application data herein is for the purpose of establishing a general guideline of the coating application procedures. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments. As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating.
Product Details
4289-556627
Data sheet
- Manufacturer
- International
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent
- For Use On
- Metal
- Application Method
- Brush, roller, spray
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Product Certifications
- Food Contact - Carriage of Grain, MED (Marine Equipment Directive), Fire Resistance - Surface Spread of Flame (WFR), Fire Resistance - Smoke & Toxicity
- Pack Size
- 5L, 20L
- Parts
- 1
- Base Type
- Alkyd
- Minimum Applied Thickness
- 75 microns dry (156 microns wet)
- Key Features
- Quick drying, surface tolerant,
- Coverage
- 6.4 m²/litre at 75 microns dft
- Recommended Thinner/Cleaner
- GTA004
- Compatible Topcoats
- Interlac 665, Intersheen 579, Interstores Alkyd, Interstores Polyurethane, Interthane 990
- Min. Application Temperature
- 21°C
- Solids by Volume
- 48% ±2% (ISO 3233:1998)
- VOC
- 412 g/lt/362 g/kg
- Shelf Life (from date of manufacture)
- 12 months minimum at 25°C
- Touch Dry
- 1.5 hrs (at 25°C)
- UN Number
- -
- Base Type
- Solvent-Based
- Base Type
- Alkyd
- Suitable For Use On
- Metal
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Surface Tolerant
- Product Usage Type
- Primer
- Product Range
- Interstores
- Colour Family
- White
- Colour Family
- Red
- Product Attributes
- Surface Tolerant
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
International Interstores Alkyd Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
International Interlac 665
International Interlac 665 is a single component alkyd gloss enamel finish. Maintenance coating for use in a wide range of industrial environments including offshore, petrochemical and chemical plants Suitable for areas of limited chemical exposure where an economical single pack finish coat is required Cosmetic finish coat for alkyd...
Price
£66.80
(incl. VAT)
In Stock and Available for Delivery
International Thinner/Equipment Cleaner GTA004
International Thinner/Equipment Cleaner GTA004 is used for thinning compatible International products. It can also be used for the general cleaning of surafces and equipment after using the associated paint or coating.
Price
£63.38
(incl. VAT)
In Stock and Available for Delivery
International Intersheen 579
Fast drying, single component, modified acrylic finish in 4,800+ semi-gloss colours intended for use as a sealer coat for single pack acrylic intumescent coating systems but may also be used as a cosmetic finish over single pack primers and intermediates. Order a Colour Sample
Price
£101.53
(incl. VAT)
In Stock and Available for Delivery
International Interthane 990
International Interthane 990 is a two component acrylic polyurethane finish giving excellent durability and long term recoatability. Across the world, people are experiencing flexible application, extended recoat windows and reduced surface preparation costs with International Interthane 990 in both new construction and as a maintenance...
Price
£524.51
(incl. VAT)
In Stock and Available for Delivery