- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG AR141 Matt Black is an air dying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures up to 300ºC.
- The full physical properties are achieved after baking at temperatures above 220ºC (at this temperature the free silicones in the system auto cross link)
- At temperatures of up to 300ºC there is virtually no decomposition of the silicone binder
- Above 300ºC the silicone is gradually driven off
- Ease of use
- Quick drying
- Also available as an aerosol, please see HMG AR141 Matt Black Aerosol
HMG AR141 Matt Black is an air dying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures up to 300ºC.
An outstanding feature of AR141 is that gassing and smoking are significantly reduced when it first attains high temperature. This is of particular advantage in the automotive field, and when AR141 is use in confined spaces.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- The full physical properties are achieved after baking at temperatures above 220ºC (at this temperature the free silicones in the system auto cross link).
- At temperatures of up to 300ºC there is virtually no decomposition of the silicone binder.
- Above 300ºC the silicone is gradually driven off.
- Ease of use.
- Quick drying.
Product Specification
Technical Data | |
---|---|
Volume Solids: | 29.6% |
VOC Content: | 0.70kgs/ltr |
SG: | - |
Viscosity: | - |
Density: | 0.994 g/cm³ |
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
Shelf Life: | 12 months from delivery date in original sealed containers. |
Flash Point: | 24°C |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | ||
Gravity Gun: | 15 μm | 70 μm | |
HVLP: | 15 μm | 70 μm | |
Brush: | 15 μm | 70 μm |
Coverage: 15 square metres per litre @ 15 microns dft (Theoretical).
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
Drying Times At 20°C | |
---|---|
Dry To Touch: | 10 minutes |
Dry To Handle: | 30 minutes |
Dry To Recoat: | 15 minutes minimum |
Fully Cured: | 1 hour |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions
- Stir all paints thoroughly before use
- Always use the same batch number on the same job
- Check colour & sheen
- Filter the product immediately before use
- Reduce emissions and maintain quality by replacing tin lid after use
Application Methods
Technical Data | |||||
---|---|---|---|---|---|
Gravity Gun | HVLP | Brush | |||
Mixing Ratio: | Base: 1 | Base: 1 | Ready for use | ||
Thinner: >10% if needed | Thinner: >10% if needed | - | |||
Thinner Options: | Thinner 2621 | Thinner 2621 | - | ||
- | - | - | |||
Viscosity: | 30 seconds B4 cup | 30 seconds B4 cup | - | ||
Spray Gun Setup: | - | - | - | ||
Number Of Coats (Guide Only): | 2 thin coats | 2 thin coats | 2 thin coats | ||
Flash Off: | 10 minutes | 10 minutes | 10 minutes |
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
Information on basic physical and chemical properties | |
---|---|
Form: | Liquid |
Colour: | According to product specification |
Odour: | Characteristic |
Odour Threshold: | Not determined |
pH-value: | Not determined |
Melting point/freezing point: | Undetermined |
Initial boiling point and boiling range: | 136°C |
Flash Point: | 24°C |
Flammability (solid, gas): | Not applicable |
Ignition temperature: | 432°C |
Decomposition temperature: | Not determined. |
Auto-ignition temperature: | Product is not selfigniting |
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." |
Explosion limits: Lower: | 1.7 Vol % |
Explosion limits: Upper: | 7.0 Vol % |
Vapour pressure at 20°C: | 6.7 hPa |
Density at 20°C: | 0.994 g/cm³ |
Relative density: | Not determined |
Vapour density: | Not determined |
Evaporation rate: | Not determined |
Solubility in / Miscibility with water: | NOT MISCIBLE |
Partition coefficient: n-octanol/water: | Not determined |
Viscosity: Dynamic at 20°C: | Not determined |
Viscosity: Kinematic: | 23 s (DIN 53211/4) |
Solvent content: Organic solvents: | 0.2% |
Solids content: | 29.6% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Suitable respiratory equipment should be worn when spraying.
Data sheet
- Manufacturer
- HMG Paints Limited
- Water / Solvent Based
- Solvent
- Application Method
- Brush, HVLP, Gravity Gun
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Touch Dry (at 20°C)
- 10 Mins
- Dry to Handle (at 20°C)
- 30 Mins
- Dry to Recoat (at 20°C)
- 15 Mins minimum
- Fully Cured (at 20°C)
- 1 Hour
- Density
- 0.994 g/cm³
- Solids by Volume
- 29.6 %
- Heat Resistance (up-to)
- 300 °C
- VOC
- 0.70kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Recommended Dry Film Thickness
- 15 μm
- Recommended Wet Film Thickness
- 70 μm
- UN Number
- UN1263
- Base Type
- Silicone
- Finish
- Matt
- Application Method
- Gravity Gun
- Application Method
- Brush
- Application Method
- HVLP
- Product Usage Type
- Topcoat
- Colour Family
- Black
- Heat Resistance
- Up To 300°C
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG AR141 Matt Black is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Thinner 2621
HMG Thinner 2621 is a thinner for use in various applications. For use with compatible HMG systems.
HMG AR141 Matt Black Aerosol
HMG AR141 Matt Black Aerosol is an air dying silicone based paint specifically formulated to enable the dried film to tolerate high temperatures up to 300ºC. For the non-aerosol version of this product please see HMG AR141 Matt Black. 400ml/16oz Aerosol The full physical properties are achieved after baking at temperatures above 220ºC (at...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...