- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Acrythane XSC98 11 (Base) is an ultra high solids (UHS) compliant coating. It is 2K acrylic cured with an isocyanate hardener with outstanding properties.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
| 2-Pack System Details | |||||
|---|---|---|---|---|---|
| Base (Part 1) | HMG Acrythane XSC98 11 | ||||
| Activator (Part 2) | HMG Hardener 9039 | ||||
- Part one of a two part system
- Rapid drying, even at low temperatures
- High gloss
- Simplicity of use
- Available in 3,500+ colours, inc. RAL, Metallics, BS, NCS & the new NCS 2050 colours
- Excellent protection against harsh weather conditions, atmospheric pollution, road dirt, sharp cleaning agents, mechanical car washes and most industrial chemicals.
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
HMG Acrythane XSC98 11 is an ultra high solids (UHS) compliant coating. It is 2K acrylic cured with an isocyanate hardener with outstanding properties.
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Hardener 9039
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Rapid drying, even at low temperatures
- High gloss
- Simplicity of use
- Excellent protection against harsh weather conditions, atmospheric pollution, road dirt, sharp cleaning agents, mechanical car washes and most industrial chemicals.
Product Specification
| Technical Data | |||
|---|---|---|---|
| HMG Acrythane XSC98 11 Clearcoat | HMG Acrythane XSC98 11 Colour | HMG Acrythane XSC98 11 Black | |
| Volume Solids: | 49.9% | 58.8% | 58.0% |
| VOC Content: | 0.420 Kg/l | 0.420 Kg/l | 0.420 Kg/l |
| SG: | - | - | - |
| Viscosity: | 140 mPas | 300 mPas | 200 mPas |
| Density: | 0.99 g/cm³ | 1.111 g/cm³ | 1.019 g/cm³ |
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
| Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. |
| Pot Life: | 1 Hour @ 20°C | 1 Hour @ 20°C | 1 Hour @ 20°C |
| Flash Point: | 25°C | 25°C | 25°C |
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Compliant Spray Gun: | 50 μm | 80 μm | |
| Pressure Pot: | 50 μm | 80 μm | |
Coverage: 11 square metres per litre @ 50 microns dft.
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 1 hour |
| Dry To Handle: | 16 hours |
| Dry To Recoat: | Flat with 500's after hard dry. Spreading rate 12 sq/m² per litre mixed (Average) |
| Fully Cured: | 3 - 5 days |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| Compliant Spray Gun | Pressure Pot | ||||
| Mixing Ratio: | Base: 2 | Base: 2 | |||
| Hardener: 1 | Hardener: 1 | ||||
| Thinner: 0.5 | Thinner: 0.5 | ||||
| Hardener Options: | Hardener 9039 | Hardener 9039 | |||
| Thinner Options: | Thinner 2601 | Thinner 2601 | |||
| Thinner 2602 | Thinner 2602 | ||||
| Thinner 2603 | Thinner 2603 | ||||
| Thinner 2604 | Thinner 2604 | ||||
| Viscosity: | 21 - 26 seconds B4 cup | 21 - 26 seconds B4 cup | |||
| Spray Gun Setup: | 1.6 - 1.8 | 1.1 - 1.4 | |||
| Number Of Coats (Guide Only): | 1 medium + 1 full | 1 medium + 1 full | |||
| Flash Off: | 15 minutes between coats | 15 minutes between coats | |||
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
| Information On Basic Physical And Chemical Properties | ||||
|---|---|---|---|---|
| HMG Acrythane XSC98 11 Clearcoat | HMG Acrythane XSC98 11 Colour | HMG Acrythane XSC98 11 Black | ||
| Form: | Liquid | Liquid | Liquid | |
| Colour: | Clear | According to product specification | Black | |
| Odour: | Characteristic | Characteristic | Characteristic | |
| Odour Threshold: | Not determined | Not determined | Not determined | |
| pH-value 20°C: | Not determined | Not determined | Not determined | |
| Melting point/freezing point: | Undetermined | Undetermined | Undetermined | |
| Initial boiling point and boiling range: | 126°C | 126°C | 124°C | |
| Flash Point: | 25°C | 25°C | 25°C | |
| Flammability (solid, gas): | Not applicable | Not applicable | Not applicable | |
| Ignition temperature: | 315°C | 415°C | 415°C | |
| Decomposition temperature: | Not determined. | Not determined. | Not determined. | |
| Auto-ignition temperature: | Product is not selfigniting | Product is not selfigniting | Product is not selfigniting | |
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |
| Explosion limits: Lower: | 3.0 Vol % | 1.2 Vol % | 1.1 Vol % | |
| Explosion limits: Upper: | 10.4 Vol % | 7.5 Vol % | 7.5 Vol % | |
| Vapour pressure at 20°C: | 10.7 hPa | 11.2 hPa | 11.2 hPa | |
| Density at 20°C: | 0.99 g/cm³ | 1.111 g/cm³ | 1.019 g/cm³ | |
| Relative density: | Not determined | Not determined | Not determined | |
| Vapour density: | Not determined | Not determined | Not determined | |
| Evaporation rate: | Not determined | Not determined | Not determined | |
| Solubility in / Miscibility with water: | NOT MISCIBLE | NOT MISCIBLE | NOT MISCIBLE | |
| Partition coefficient: n-octanol/water: | Not determined | Not determined | Not determined | |
| Viscosity: Dynamic at 20°C: | 140 mPas | 300 mPas | 200 mPas | |
| Viscosity: Kinematic: | Not determined | Not determined | Not determined | |
| Solvent content: Organic solvents: | 45.5% | 37.9% | 37.4% | |
| Solids content: | 49.9% | 58.8% | 58.0% | |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
- Ready for use product contains isocyanates. Suitable air fed respiratory equipment should be worn when spraying.
Product Details
4405-851961
Data sheet
- Manufacturer
- HMG Paints Limited
- For Use On
- Metal
- Application Method
- Spray
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1L
5L - Mixing Ratio
- Base: 2 - Hardener: 1 - Thinner: 0.5
- Application
- Spray
- Touch Dry (at 20°C)
- 60 mins
- Dry to Handle (at 20°C)
- 16 Hours
- Dry to Recoat (at 20°C)
- Flat with 500's after Hard Dry. Spreading rate 12 sq/m2 per litre mixed (Average)
- Fully Cured (at 20°C)
- 3 - 5 Days
- Pot Life (at 20°C)
- 1 Hour
- Recommended Thinner/Cleaner
- Thinner 2601/2602/2603/2604
- Compatible Primers
- Polykote 2K AMC4 Primer
- Density
- Clearcoat: 0.99 g/cm³ - Colour: 1.111 g/cm³ - Black: 1.019 g/cm³
- Solids by Volume
- Clearcoat: 49.9 % - Colour: 58.8 % - Black: 58.0 %
- Heat Resistance (up-to)
- 120 °C
- VOC
- 0.420 Kg/l
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Finish
- Gloss
- Size
- 1L, 2.5L, 5L
- Recommended Dry Film Thickness
- 50 μm
- Recommended Wet Film Thickness
- 80 μm
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Primed Surfaces
- Finish
- Matt
- Finish
- Satin
- Finish
- High Gloss
- Application Method
- Spray
- Usages
- Atmospheric Polution Resistance
- Usages
- High Solids
- Usages
- Chemical Resistance
- Usages
- Atmospheric
- Usages
- Tough/Durable
- Usages
- Weather Resistance
- Product Usage Type
- Topcoat
- Product Range
- Acrythane
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Metallic
- Colour Family
- Anthracite Grey
- Colour Family
- Stone
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- Clear
- Product Type
- Epoxy
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 60 mins
- Resistance to
- Chemicals
- Resistance to
- Atmospheric Polution
- Resistance to
- Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Acrythane XSC98 11 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
HMG Thinner 2601
HMG Thinner 2601 is a very fast thinner. For use in recommended HMG systems.
Price
£14.09
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2602
HMG Thinner 2602 is a medium slow thinner. For use with compatible HMG systems.
Price
£14.15
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2603
HMG Thinner 2603 is a medium slow thinner. For use with compatible HMG systems.
Price
£48.01
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2604
HMG Thinner 2604 is a slow thinner. For use with compatible HMG systems.
Price
£14.78
(incl. VAT)
In Stock and Available for Delivery
HMG 2K Accelerator
HMG 2K Accelerator is a hardener designed to speed up drying times. For use with HMG Acrythane systems.
Price
£40.00
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9039
HMG Hardener 9039 is a high solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane XSC98 11 HMG Monothane 2K Topcoat Activator (Part 2) HMG Hardener 9039 Part two of a two...
Price
£30.95
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£26.45
(incl. VAT)
In Stock and Available for Delivery