- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Monothane 2K Topcoat (Base) is a twin-pack, single coat, direct to surface gloss primer, giving excellent adhesion and corrosion protection for most clean and degreased metal substrates and many plastics.
This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener:
| 2-Pack System Details | |||||
|---|---|---|---|---|---|
| Base (Part 1) | HMG Monothane 2K Topcoat | ||||
| Activator (Part 2) | HMG Hardener 9004 Standard or HMG Hardener 9039 | ||||
- Professional use only
- Part one of a two part system
- Touch-dry in 1 hour - can be force dried in 30 mins at 70-80°C
- Provides excellent corrosion resistance
- Excellent durability
- Suitable for ferrous metals including skips, containers, agricultural and construction vehicles, machinery, street furniture and shop fronts
- Also has excellent adhesion to a wide range of plastics without the need for a plastic primer
- Suitable for airless, air and compliant spray application
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours - note that standard black is only available in 5L and 20L sizes
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Please note this product is one part of a two-pack system which MUST be purchased/used together with HMG Hardener 9004 Standard or HMG Hardener 9039
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application
- Product Notes
- Health & Safety
Features & Benefits
- Professional use only
- Part one of a two part system - for use with HMG Hardener 9004 Standard or HMG Hardener 9039
- Provides excellent corrosion resistance
- Touch dry in 1 hour, hard dry overnight - can be force dried in 30 mins at 70-80°C
- Good gloss level and excellent durability
- Can be applied directly to most clean & degreased metals, also has excellent adhesion to a wide range of plastics without the need for a plastic primer
- Suitable for airless, air & compliant spray application
- Manufactured under the auspices of an ISO 9001 management system
- Available in 3,500+ colours, inc. RAL Classic, BS, NCS & the new NCS 2050 colours
Product Specification
| Technical Data | |||||
|---|---|---|---|---|---|
| 2K Topcoat Colours | 2K Topcoat (contains lead) | Graphite Black | Cascade Linde Grey RAL7021 | Structured Gloss Colours | |
| Volume Solids: | 62.6% | 65.4% | 68.8% | 68.2% | 70.6% |
| VOC Content: | 0.420Kg/L | 0.420Kg/L | 0.420Kg/L | 0.420Kg/L | 0.420Kg/L |
| SG: | - | - | - | - | - |
| Viscosity: | 300 mPas | 300 mPas | 370 mPas | 380 mPas | 1100 mPas |
| Density: | 1.221 g/cm³ | 1.318 g/cm³ | 1.268 g/cm³ | 1.327 g/cm³ | 1.412 g/cm³ |
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | Store between 5°C - 25°C. When not in use, cans must be kept sealed. |
| Shelf Life: | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. | 12 months from delivery date in original sealed containers. |
| Pot Life: | 1 hour to double viscosity depending on temp. | 1 hour to double viscosity depending on temp. | 1 hour to double viscosity depending on temp. | 1 hour to double viscosity depending on temp. | 1 hour to double viscosity depending on temp. |
| Flash Point | 25°C | 25°C | 25°C | 25°C | 24°C |
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Gravity Gun: | 25 - 100 μm | 25 - 100 μm | |
| Airless/Air-Assisted: | 50 - 200 μm | 50 - 200 μm | |
Coverage: 17-22m²/L at 20 microns DFT depending on colour and gloss.
- HMG technical data sheets (see section above) indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications
- Film thickness will vary depending on actual use and specification
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 1 hour |
| Force Dry: | 20-30 minutes at 70 - 80°C |
| Dry To Recoat: | 10 minutes between coats - 10 minutes before baking |
| Fully Cured: | Overnight |
Surface Preparation
- Ensure surfaces are clean, dry and free from grease, oils, dust and other contamination prior to application
- High pressure wash to remove all loose debris and other contamination
- Thoroughly clean and degrease using suitable HMG Prep Clean 2802, HMG 2803 or HMG 2804
- Check all existing coatings are well adhered with all loose and failed material removed back to firm with all edges well feathered
- Read and follow the safety data sheet, product data sheet (see section above) and label instructions
- Rust/corrosion to be removed to Sa or St standards, remove to clean metallic appearance with little or no rust/corrosion present
- Areas where blast cleaning is not cost effective or practical, then the use of Ferrozinc is an alternative
- Though Ferrozinc is not an equivalent alternative to shot blasting, it does offer a far superior performance than conventional coatings applied to slightly rusted surfaces
- FERROZINC is used after simple wire brushing to remove surface rust, prior to application of primer
- Stir all paints thoroughly before use
- Always use the same batch number on the same job
- Check colour & sheen
- Filter the product immediately before use
- Reduce emissions and maintain quality by replacing tin lid after use
Application
Substrates
- HMG 2K Monothane is for application direct to most suitably prepared metals and many plastics
- Not suitable for coating over bitumen or chlorinated rubber coatings
- Suitability over existing coating should be trialled in small area prior to full application
Application Climate
- Substrate temperature should be 5⁰C or above for application and during cure, and a minimum of 3⁰C above the dew point
- Adequate dry air ventilation should be supplied during drying
Application Information
- Thinning should only take place after material is thoroughly mixed
- Application and use should always conform with the codes of practice described in BS 6150 and BS 5493
Application
- Apply HMG 2K Monothane evenly via Airless/Air-assisted, Pressure Pot, Compliant Spray. 1-2 full coats
- HMG 2K Monothane is a twin pack product and will require the mixing of the two parts prior to application, once
mixed a chemical reaction will occur to allow the product to dry - When using twin pack products it is important that pot life is observed
For further information please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected]
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use
- Suitable respiratory equipment should be worn when spraying
- Contaminated rags, spray booth filters or other substrates should be segregated from other chemical waste, soaked
with water or disposed of in a non-combustible container with tight fitting lid
Product Details
4414-887476
Data sheet
- Manufacturer
- HMG Paints Limited
- For Use On
- Hard Plastics
uPVC
Window Frames
Ferrous Metals
Skips
Metal Containers
Agricultural Machinery
Construction Machinery
Vehicles
Machinery
Street Signs
Shop Fronts
Powder Coated Surfaces
Polystyrene
GRP
SMC - Application Method
- Spray
- Sheen
- Gloss
- Colour
- Fully Tintable
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 2.5L
5L
15L
20L - Mixing Ratio
- Base: 2 - Hardener: 1 - Thinner: 10 - 15%
- Touch Dry (at 20°C)
- 60 mins
- Fully Cured (at 20°C)
- Overnight
- Pot Life (at 20°C)
- 1 hour
- Coverage
- 17-22m²/L at 20 microns DFT
- Recommended Thinner/Cleaner
- HMG Thinner 2601/2602/2603/2604
- VOC
- 420g/L
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers
- Touch Dry
- 1 Hour
- Recommended Dry Film Thickness
- 25-100 μm
- Recommended Wet Film Thickness
- 50-200 μm
- UN Number
- UN1263
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Powder Coated Surfaces
- Suitable For Use On
- Shop Fronts
- Suitable For Use On
- Sheet Moulding Compound (SMC)
- Suitable For Use On
- UPVC
- Suitable For Use On
- GRP Glass-Reinforced Plastic
- Suitable For Use On
- Hard Plastics
- Suitable For Use On
- Ferrous Metals
- Suitable For Use On
- Street Signs
- Suitable For Use On
- Vehicles
- Suitable For Use On
- Polystyrene
- Suitable For Use On
- Machinery
- Suitable For Use On
- Agricultural Machinery
- Suitable For Use On
- Construction Machinery
- Suitable For Use On
- Window Frames
- Suitable For Use On
- Skips
- Suitable For Use On
- Metal Containers
- Finish
- Gloss
- Application Method
- Spray
- Manufacturer
- HMG Paints LTD
- Usages
- Corrosion Resistance
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Usages
- Force Dry Compatible
- Usages
- Primer/Finish
- Usages
- 1 Coat
- Usages
- Direct to Metal
- Product Usage Type
- Primer
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Beige
- Colour Family
- Grey
- Product Type
- Polyurethane
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 60 mins
- Drying Properties
- Force Dry Compatible
- Product Attributes
- Anti-Corrosive
- Product Attributes
- Primer/Finish
- Product Attributes
- 1 coat
- Resistance to
- Corrosion
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Monothane 2K is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
HMG Thinner 2601
HMG Thinner 2601 is a very fast thinner. For use in recommended HMG systems.
Price
£14.09
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2602
HMG Thinner 2602 is a medium slow thinner. For use with compatible HMG systems.
Price
£14.15
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2603
HMG Thinner 2603 is a medium slow thinner. For use with compatible HMG systems.
Price
£48.01
(incl. VAT)
In Stock and Available for Delivery
HMG Thinner 2604
HMG Thinner 2604 is a slow thinner. For use with compatible HMG systems.
Price
£14.78
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9004 Standard
HMG Hardener 9004 Standard is a medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours HMG Acrythane 102 HMG 2K Multi Surface Topcoat HMG Polykote 2K AMC Primer...
Price
£31.16
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9039
HMG Hardener 9039 is a high solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane XSC98 11 HMG Monothane 2K Topcoat Activator (Part 2) HMG Hardener 9039 Part two of a two...
Price
£30.95
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£26.45
(incl. VAT)
In Stock and Available for Delivery